Lynxspring SEC-JENE-RIO : Includes connections for 8 Supervised Inputs, 8 Form C Relay Outputs, and 2 Digital Inputs. Contains removable screw terminal connectors, and status indication LEDs. (Approval Required for Purchase)
Lynxspring SEC-JENE-R2R : Includes connections for 2 Card Readers, 4 Supervised Inputs, 2 Form C Relay Outputs, and 2 Digital Inputs. Contains removable screw terminal connectors, and status indication LEDs. (Approval Required for Purchase)
Lynxspring R-499-TB : Din rail mounted terminal block with 499 Ohm internal resistor two lugs in two lugs out. When installed with wire from top lug to bottom lug connection includes the inline resistor. Top to top or bottom to bottom connection bypasses resistor. (10 Pack)
Lynxspring R-120-TB : Din rail mounted terminal block with 120 Ohm internal resistor for termination of 485 communication lines, two lugs in two lugs out. When installed with wire from top lug to bottom lug connection includes the inline resistor. Top to top or bottom to bottom connection bypasses resistor. (10 Pack)
Lynxspring ONYXX-MB311-2500 : The Onyxx-MB311 supports a maximum of 2,500 Modbus points, 32 Modbus RTU slave devices without a repeater or up to 246 with repeaters, 246 Modbus TCP slave devices per network segment, or a combination thereof.
Lynxspring ONYXX-MB311-1000 : The Onyxx-MB311 supports a maximum of 1,000 Modbus points, 32 Modbus RTU slave devices without a repeater or up to 246 with repeaters, 246 Modbus TCP slave devices per network segment, or a combination thereof.
Lynxspring Onyxx-CE121-4GLTE : Lynxspring’s new Onyxx CE121 Cellular Router with 4G LTE is designed to support secure, remote access and the exchange of data among today’s intelligent buildings, energy management systems, machine- to-machine applications, edge devices and cloud services.
Lynxspring JENE-PCLCD-R-Unit : LCD Interface kit for mounting the LCD directly onto the JENE controller. Includes; 1 LCD Interface Device, 1 Shroud adaptor for the controller and 1 LCD communication card with cable.
Lynxspring JENE-PCLCD-R-Service : LCD Interface kit for with necessary parts to use a hand held or portable service tool Includes; 1 LCD Interface Device, 1 power supply, 1 RS232 adaptor, 1 LCD communication card and two cables. 4 AA Batteries not included.
Lynxspring JENE-PCLCD-R-Remote : LCD Interface kit for mounting the LCD remotely (50ft to 4000ft). Includes; 1 LCD Interface Device, 1 LCD Trim Ring for panel or wall mounting, power supply and 1 RS485 Convertor.
Lynxspring JENE-PCLCD-R-LOCAL-6 : LCD Interface kit for mounting the LCD remotely (Up to 6ft). Includes; 1 LCD Interface Device, 1 LCD Trim Ring for panel or wall mounting, 1 LCD communication card, 1 6 ft cable (TEL-6000-06K-RJ11).
Lynxspring JENE-PCLCD-R-Local : LCD Interface kit for mounting the LCD remotely (Up to 50ft). Includes; 1 LCD Interface Device, 1 LCD Trim Ring for panel or wall mounting, 1 LCD communication card, 1 50 ft cable (8101-64150).
Lynxspring JENE-PCLCD-R : Remote LCD Interface Device for NiagaraAX JENE and JACE controllers. Provides a non software interface into the controllers points, schedules, alarms, system info, etc.
Lynxspring JENE-PC-LCDCARD : LCD Optional Communication Card for JENE and JACE controllers. Provides power and communcation to the LCD Interface Device when battery or wal-wart power are not used. (Approval Required for Purchase)
