Z202855-0D Page 1 of 2 ©2016 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 0616 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. Other companies’ trademarks are hereby acknowledged to belong to their respective owners. TM Installation Guide Relays Product Overview The Victory 300 Series 10 A DPDT pilot duty enclosed relays combine industrial strength and ease of use. The nipple mount enclosure makes installation easy. With no need for a dedicated field enclosure, they are the ideal retrofit devices. One coil input controls the state of two pilot rated contacts for the simultaneous control of two devices or both poles of a single-phase circuit, e.g. motor loads. Field-selectable high and low voltage coil inputs provide on-site versatility. V300 10 A DPDT Enclosed Relay Specifications Operating Temperature -34 to 60 °C (-29 to 140 °F) Operating Humidity 10 to 90% non-condensing Expected Relay Life Electrical (at rated current): 100,000 cycles Mechanical (unpowered): 10,000,000 cycles Relay StatusLED ON=energized Wire Lead Length14” (356mm) min. Wire GaugeUL1015; Coil: 18AWG; Contacts: 16AWG Insulation Class600 Vac RMS Agency ApprovalsUL508 enclosed device listing, pollution degree 2 Product Identification Dimensions 1.6" (41 mm) 1.7" (43 mm) 1/2" NPT Nipple 1.8" (46 mm) 2.9" (74 mm) 2.8" (71 mm) ModelRelayCoilAmperage RatingRelay Power LEDUL V300DPDT20 to 30 Vac/dc, 120 Vac10 AYesYes Note: Some units are Plenum rated per UL 1995. For details, see White Paper VWP01, UL 1995 and Plenum Ratings, at www.veris.com.Z202855-0D Page 2 of 2 ©2016 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 0616 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. Other companies’ trademarks are hereby acknowledged to belong to their respective owners. TM V300 Installation Guide Installation Wiring Color Codes Contact and Coil Specifications Wiring Examples Disconnect and lock out all power sources before beginning the installation. 1. Using the threaded nipple, connect the relay to the desired enclosure through a knock out hole. 2. Secure with the conduit nut provided. 3. Connect coil: • Choose the coil common lead (white with yellow stripe) and connect it to the common (-) source termination point. • Choose either the low voltage (20-30VAC/DC, white with blue stripe) or high voltage (120VAC, white with black stripe) lead, depending on the application requirements, and connect it to the (+) source termination point.* 4. Connect relay contacts: • Choose the relay common wire (yellow) and connect to the switched load. • Choose the relay N.O. (orange) and/or* N.C. (blue) lead and connect to the switched load. 5. Secure the enclosure and reconnect power. * Isolate or insulate all non-terminated wires according to local electrical code requirements, i.e. wire nut. N.C. Common 20-30 Vac/dc 120 Vac HI wht/black LOW wht/blue COMM wht/yellow Common N.O. CONTACT OUTPUTCONTROL SYSTEM INPUT White YELLOW White White ORANGE b l a c k b l a c k b l u e b l u e y e l l o w y e l l o w b l a c k N.C. Common N.O. Nipple mount directly to a panelNipple mount to a 2x or 4x electrical box *Contact ratings are for single pole operation. When operating both poles simultaneousley, the total load cannot exceed the ratings above. Pull in Voltage AC DC 20-30 V..................................... 18 20 120 V........................................ 104 Drop Out Voltage AC DC 20-30 V..................................... 4 5 120 V........................................ 26 Voltage Coil Current AC DC 24 V.......................................... 43 mA 25 mA 30 V.......................................... 54 mA 31 mA 120 V........................................ 29 mA - TYPICAL COIL PERFORMANCE CONTACT RATINGS* Resistive.............. 10 A@250 Vac, 30 Vdc Motor.................... 120 Vac, 1/8HP * Isolate any unused wires, e.g. wire nut. To Load A To Controls CONTROL PANEL COIL To Load B To Power COM N.O. N.C. To Load B To Control Wire Nuts C O I L CONTACTS To Load A To Power N.C. N.O. COMNext >