Installation Guide Temperature Z202233-0V Page 1 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 11131 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. Other companies’ trademarks are hereby acknowledged to belong to their respective owners. TM NOTICE • This product is not intended for life or safety applications. • Do not install this product in hazardous or classified locations. • Read and understand the instructions before installing this product. • Turn off all power supplying equipment before working on it. • The installer is responsible for conformance to all applicable codes. No responsibility is assumed by Veris Industries for any consequences arising out of the use of this material. Product Identification Product Overview The TE wall mounted temperature sensor monitors the temperature of the air inside a room. It has standard resistive outputs compatible with building control systems, and it is warranted for a period of five years. TE Series Wall Temperature Sensor Specifications Wiring22 AWG; 2-wire RTD/Thermistor Sensor Type Setpoint/Override TE 0 = None 1 = Override 2 = 1k Setpoint 3 = 10k Setpoint 4 = 1k Setpoint w/override 5 = 10k Setpoint w/override Cal Certificate 0 = None 1 = 1 point Cal validation 2 = 2 point Cal validation B = 100R platinum, RTD C = 1k platinum, RTD D = 10k T2, Thermistor E = 2.2k, Thermistor F = 3k, Thermistor G = 10k CPC, Thermistor H = 10k T3, Thermistor I = 1k Balco (Nickel-iron) RTD J = 10k Dale, Thermistor K = 10k w/11k shunt, Thermistor M = 20k NTC, Thermistor N = 1800 ohm, Thermistor R = 10k US, Thermistor S = 10k 3A221, Thermistor T = 100k, Thermistor U = 20k “D”, Thermistor W = 10k T2 high accuracy, Thermistor Y = 10k T3 high accuracy, Thermistor Z = 10k E1, Thermistor CC = 15k, ThermistorZ202233-0V Page 2 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 11131 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. Other companies’ trademarks are hereby acknowledged to belong to their respective owners. Installation Guide Temperature TE Series TM Dimensions 4.5" (115 mm) 0.3" (6 mm) 0.5" (13 mm) 2.8" (70 mm) 3.2" (82 mm) Installation1. Connect the wires to the thermistor terminals (see the wiring diagrams). Do not overtighten the screws. 2. For optional feature models, connect the color coded wires as indicated. Thermistor/RTD Only Optional Feature Models Connect wires to terminals Avoid damaging the thermistor White/Reverse Grey/Normal Black/Wiper Orange/Thermistor/RTD 3. Mount the unit on a single-gang junction box using the screws provided or directly to the wall using #6 drywall screws. Use the foam gasket provided to ensure proper insulation from the wall temperature. 4. Install the screw cover caps provided.Next >