TDDA TK TD TG TF Duct mount temperature sensors from Veris are pre-calibrated and housed in sturdy stainless steel probes. The devices are easy to install, durable, and highly accurate. Wiring22 AWG; 2-wire: RTD/Thermistor, 4 to 20 mA; 3-wire: Linitemp TEMPERATURE TRANSMITTER OPTION Input Power4 to 20 mA models: Loop powered Class 2, 12 to 30 Vdc only, 30 mA max; 0-5/0-10 V models: Class 2, 12 to 30 Vdc/24 Vac, 50/60 Hz, 15 mA max Temp. Output2-wire, loop powered 4 to 20 mA 3-wire, 0-5V/0-10Vdc Sensor TypeSolid-state, integrated circuit Transmitter Accuracy±0.5 °C (±.9 °F) typical* RangesSelectable 0 to 50 °C (32 to 122 °F) or -40 to 50 °C (-40 to 122 °F) LINITEMP OPTION Input Power5 to 30 Vdc Output10 mV/°C Operating Temp-25 to 105 °C (-13 to 221 °F) Calibration Offset1.5 °C (2.7 °F) typical; 2.5 °C (4.5 °F) max. at 25 °C (77 °F)** *Room temperature offset documented on each unit. **The CE mark indicates RoHS2 compliance. Please refer to the CE Declaration of Conformity for additional details. Cost effective Cost-effective, high accuracy thermistors or RTDs available with or without a junction box Durable Corrosion resistant stainless steel probe design No calibration No calibration required APPLICATIONS • Duct systems • Industrial Offset over Temp 1.8 °C (3.24 °F) typical; 3.0 °C (5.4 °F) max. over 0 to 70 °C (32 to 158 °F) range 2.0 °C (3.6 °F) typical, 3.5 °C (6.3 °F) max. over -25 to 105 °C (-13 to 221 °F) range RESISTIVE OPTION Operating Temp-25 to 105 °C (-13 to 221 °F) WARRANTY Limited Warranty5 years AGENCY APPROVALS ** SPECIFICATIONS TM Temperature Monitoring | Duct Mount Temperature Sensors T SERIES Sensor Housed in Probe, Protects Against Corrosion HQ0001874.H 01170.25"Dia. (6 mm) 1.5" (38 mm) 2" (51 mm) 1.1" (28 mm) L 2.9" (74 mm) 4.6" (117 mm) 2.0" (51 mm) 0.7" (18 mm) Foam Gasket 2.5" x 2.5" (64 mm x 64 mm) 8.5" (216 mm) 0.5" Dia. (13 mm.) 2.3" (59 mm) 4.3" (109 mm) 0.25"Dia. (6 mm) L L 0.25"Dia. (6.3 mm) 2.9" (74 mm) 4.6" (117 mm) 2.0" (51 mm) 0.7" (18 mm) Foam Gasket 2.5" x 2.5" (64 mm x 64 mm) L 0.25" (6 mm) T TDDA Output M = 4 to 20mA V = 5/10 V Cal Certificate 0 = None 1 = 1 point Cal validation 2 = 2 point Cal validation Range 1 = -40 to 50 °C (-40 to 122 °F) 2 = 0 to 50 °C (32 to 122 °F) Example: TDDA V20 Enclosure Immersion Probe Length “L” B = 4" (102mm)* C = 6" (152mm) D = 8" (203mm) E = 12”(305mm)** F = 18”(457mm)** G = 24”(610mm)** K = 36”(914mm)** D = Duct K = Probe only (no mounting hardware) F = Duct with mounting box G = Duct with water resistant housing Calibration Certificate 0 = None 1 = 1-point cal validation*** 2 = 2-point cal validation*** Sensor Type B = 100R platinum, RTD C = 1k platinum, RTD D = 10k T2, Thermistor E = 2.2k, Thermistor F = 3k, Thermistor G = 10k CPC, Thermistor H = 10k T3, Thermistor I = 1k Balco (Nickel-iron) RTD J = 10k Dale, Thermistor K = 10k w/11k shunt, Thermistor M = 20k NTC, Thermistor N = 1800 ohm, Thermistor P = 10mV/°C, Linitemp R = 10k US, Thermistor S = 10k 3A221, Thermistor T = 100k, Thermistor U = 20k “D”, Thermistor W = 10k T2 high accuracy, Thermistor Y = 10k T3 high accuracy, Thermistor Examples: * TK model is 4 1/2” (115 mm) ** Not available with TK model *** Not available with W and Y high-accuracy thermistors TD Dimensional Drawing TF Dimensional Drawing TK Dimensional Drawing ORDERING INFORMATION RTD/Thermistor Models Transmitter Models TDDA Dimensional Drawing TG Dimensional Drawing T DBDR02 Output = Resistive Output RØ Temperature Monitoring | T Series HQ0001874.H 0117THERMISTOR TABLE To compute Linitemp Temperature mV reading/10 - 273.15 = Temperature in °C ClassPt RTDBalco RTD THERMISTOR Type100 Ohm1000 Ohm1000 Ohm10k Type 210k Type 310k Dale10k “G” US20k Accuracy±0.3°C±0.3°C±1% @70°C±1.0°C±0.2°C±0.2°C±0.2°CConsult 0.00385 curve 0.00385 curve -50/150°C0/70°C-20/70°C0/70°CFactory Temp. Response* PTCPTCPTCNTCNTCNTCNTCNTC STANDARD RTD AND THERMISTOR VALUES (Ohms ) °C°F100 Ohm1000 Ohm1000 Ohm10k Type 210k Type 310k Dale10k “G” US20k NTC -50-5880.306803.06740.46692,700454,910672,300441,2001,267,600 -40-4084.271842.71773.99344,700245,089337,200239,700643,800 -30-2288.222882.22806.02180,100137,307177,200135,300342,000 -20-492.160921.60841.0098,32079,72997,13078,910189,080 -101496.086960.86877.4655,79047,84355,34047,540108,380 032100.0001,000.00913.6632,77029,58832,66029,49064,160 1050103.9031,039.03952.2519,93018,81319,90018,78039,440 2068107.7941,077.94991.8212,50012,27212,49012,26024,920 2577109.7351,097.351,013.5010,00010,00010,00010,00020,000 3086111.6731,116.731,035.188,0558,1958,0568,19416,144 40104115.5411,155.411,077.685,3235,5935,3265,59210,696 50122119.3971,193.971,120.523,5993,8943,6023,8937,234 60140123.2421,232.421,166.132,4862,7632,4892,7604,992 70158127.0751,270.751,210.751,7531,9941,7531,9903,512 80176130.8971,308.971,254.551,2581,4621,2581,4582,516 90194134.7071,347.071,301.179191,0889171,0841,833 100212138.5061,385.061,348.38682821679816.81,356 110230142.2931,422.931,397.13513628511623.61,016 120248146.0681,460.681,447.44392486389481.8770 130266149.8321,498.321,496.28303380301376.4591 Sensor Codes BCIDHJRM Accessories | C Series TM Temperature Monitoring | Thermistor Table HQ0001874.H 0117 HQ0001874.H 0117Next >