StandardsUL and cUL Listed; FCC part 15 (Class B) for home and office use Input120 or 277 Vac±10% 60 Hz Output120 Vac, 1000 W max. tungsten incandescent load; 1000 VA max. ballast load; ¼ HP max. motor load; 277 Vac; 1800 VA max. ballast load Temperature0 to 50 °C (32 to 122 °F) HumidityMax. 90% RH non-condensing WARRANTY Limited Warranty1 year AGENCY APPROVALS Top View 35 ft (10.7m) 10 ft (3.1m) 15 ft (4.6m) 25 ft (7.6m) 35 ft (10.7m) Side View 4 ft (1.2m) Minor Motion Major Motion The MSB Series employs the latest passive infrared (PIR) technology to automatically control lighting for areas up to 1000 square feet, achieving energy savings and convenience. Each sensor employs a special 180° multi-segmented lens and PIR motion detector circuit to sense when a person enters the area and automatically activate the lights. The sensor will automatically switch the lights off after a preset delay if motion is no longer detected. The MSB Series fits in place of existing wall switches, connecting to existing wiring, similar to a typical wall switch. The MSB Series is the simplest way to achieve energy saving lighting control with minimal installation time. To assure long relay life, the MSB Series employs a low energy switch circuit to assure maximum contact life. These sensors are compatible with electronic and magnectic ballast loads. MSBP SPECIFICATIONS MSB SERIES Coverage Patterns Adjustable Adjustable time delay Line powered No separate supply needed Bypass button Bypass button for “always on” operability…simpilifies commissioning 180-degree motion detection Ballast compatibility Compatible with magnetic and electronic ballasts…provides ultimate flexibility 180 degrees 180-degree motion detection Loading No minimum loading requirement APPLICATIONS • Lighting control for LEED* programs and reduced energy usage • Use in offices, copy rooms, common building areas, storage closets, small conference rooms, and more • Fits in place of existing wall switches connecting to the existing active line and ground wiring…great for retrofit installations *Leadership in Energy and Environmental Design (LEED) is a registered mark of the US Green Building Council 800.354.8556 | +1 503.598.4564 | sales@veris.com | intl@veris.com TM Occupancy Sensors | Wall Switch Occupancy Sensors MSB SERIES Employs a Low-Energy Switch Circuit to Maximize Contact Life HQ0001802.F 0117LOAD Neutral (WHT) Ground (GRN) Hot (BLK) (RED) (RED) LOAD LOAD Neutral (WHT) Ground (GRN) Hot (BLK) 4.2” (107 mm) 4.5” (114 mm) 1.8” (46 mm) 2.8” (69 mm) 1.3” (33 mm) Sensing Technology = Passive Infrared (PIR) MSB P Color Turn On # of Circuits A = Automatic M = Manual 1 W = White V = Ivory Example: MSBPA1V MSB SERIES Dimensional Drawings SINGLE-LEVEL LIGHTING Wiring Diagram BI-LEVEL LIGHTING Wiring Diagram ORDERING INFORMATION Occupancy Sensors | MSB Series HQ0001802.F 0117Next >