Z205238-0A PAGE 1 ©2008 Veris Industries USA 800.354.8556 or 503.598.4564 / support@veris.com 01082 6%2)3 ).$5342)%3 current sensors InstALLAtIon GuIDe AH27 AH27 NOTICE DANGER operation The AH27 DIN Rail Clip kit allows the Veris Hawkeye H30x current sensors to be mounted onto a standard 35mm DIN Rail. The kit contains two parts, the DIN Rail adapter and the retaining clip, which are used in conjunction with the H30x sensor's mounting bracket (included with the sensor; not part of this kit). The mounting bracket slips onto the DIN Rail adapter. The retaining clip then fits onto this assembly to pressure-fit the adapter onto the bracket. Finally, the current sensor snaps onto its mounting bracket as usual. DIN Rail Clip Kit for H30x Current Sensors Lower the mounting bracket onto the DIN Rail adapter. The vertical hooks must fit 1. into the opening on the mounting bracket. Insert the retaining clip at an angle so 2. that one side fits under one adapter hook. Press the other side of the clip 3. so that it snaps into the other adapter hook. Press both sides of the assembly 4. together to ensure secure fastening. installation When the adapter, bracket, and 5. retaining clip are all fastened together, snap the H30x current sensor onto this assembly. The sensor is now ready for DIN Rail mounting.Next >