Technical Specification Sheet Document No. 149-603 April 6, 2016 Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. Desigo® and Desigo® CC™ are registered trademarks of Siemens Schweiz AG. Other products or company names mentioned herein may be the trademarks of their respective owners. © 2016 Siemens Industry, Inc. Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089 USA + 1 847-215-1000 Your feedback is important to us. If you have comments about this document, please send them to SBT_technical.editor.us.sbt@siemens.com Document No. 149-603 Printed in the USA Page 1 of 1 PL-Link Semi-Flush Mount Room Sensor Kits for Use with Siemens DXR Controllers Description Siemens Semi-Flush Mount Room Sensors are engineered to enable accurate and efficient control of room comfort. The low-profile housing design seamlessly blends into any décor and features strategically placed ventilation slots to maximize airflow and optimize accuracy. Semi-Flush Mount Sensors are sold as kits consisting of a base module, front module and trim frame. Kit NumberMeasured Values QAA2570.2532 Temperature QFA2570.2535 Temperature + Humidity QPA2576.2535 Temperature + Humidity + CO 2 The base modules, front modules, and frames can also be purchased individually for service parts. Sensors are designed for flush mounting in a standard 2” × 4” vertical electrical box. In addition to measuring and transmitting room climate data to the controller, the semi-flush mount PL-Link sensors can also accept binary (on/off) and temperature (10 K ohm Type 2 Thermistor) inputs from auxiliary devices for transmission to the Desigo® building automation system. NOTE: QPA Series Sensors are designed to measure air quality in comfort applications, and are not intended for use in life safety applications. Specifications Temperature Measuring Range Accuracy 32 ° F to 122 ° F (0 ° C to 50 ° C) ± 0.45°F (± 0.25°C) Humidity Measuring Range Accuracy 0 to 100% rh ± 3% between 20% to 80% ± 5% < 20%; > 80% CO 2 Measuring Range Accuracy* Long-term Drift 0 to 5000 ppm < 2K ppm: ± (50 ppm +2% M.V.) > 2K ppm: ± (50 ppm +3% M.V.) < ± 20 ppm/yr. Input Power VA Rating Relay Output Rating 15 to 35 Vdc or 24 Vac ± 20% 1.5 VA, max. 0.5A @ 30Vac/dc max. Color Dimensions Shipping Dimensions Shipping Weight White 4.75” H × 3.125” W × 0.625” D (120 mm × 80 mm × 16 mm) 12” × 6” × 6” (305 mm × 153 mm × 153 mm) 12 oz. (340 g) * Peak accuracy attained within 96 hours of initial power up. Product Ordering Information DescriptionPartNumber Temperature Sensor Complete Kit QAA2570.2532 Temperature + RH Sensor Complete Kit QFA2570.2535 Temperature + RH + CO 2 Sensor Complete Kit QPA2576.2535 Replacement Base ModuleAQR2570NJ Replacement Base Module – CO 2 AQR2576NJ Replacement Trim FrameAQR2510NGW Replacement Front Module Temperature Only AQR2532NNW Replacement Front Module Temperature + RH AQR2535NNWNext >