14 | 866-660-8864 | fax 503-296-2529 | www.senvainc.comMonitored Sensor MinimumCurrent 0.25ASensor EnergizedLoad (0A)Output7 year limited warrantyIn the U.S.ADesigned and AssembledFixed SetpointCurrent SwitchesGo/No status0.25-200A rangeSplit and solid core modelsN.O. 30VAC/DC or 120VAC output Optional command relay APPLICATIONS ▪Monitoring on/off status of electrical loads ▪Monitoring direct-drive units, exhaust fans, and other fixed loads ▪Verifying lighting run timesDESCRIPTION Fixed threshold trip point detects the presence of current above low trip point to provide cost-effective status monitoring unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern.Ideal for ECM motors ▪Trip point operation is tuned to prevent false trips when used with electronically commutated motors Reliable and cost-effective ▪Solid-state—no moving parts to fail ▪Less expensive than 277V relays for lighting status ▪More reliable for status than relays across auxiliary contacts ▪Industry leading 7 year limited warrantyThe go/no series output changes state whenever current above the minimum turn-on is present. This provides “go/no” status on loads that are not subject to mechanical failures.Status Output1.0A @ 30VAC/DCNormally OpenV+DICONTROLLER(SINKING)INSULATED PRIMARYAC CONDUCTOR600VAC MAXV+DINOTE: Device is NOT polarity sensitive.v24VACDIV+DI(SOURCING)(AC)ALTERNATECONTROLLER ARRANGEMENTSDIDIVACGNDTYPICAL WIRINGFEATURESCURRENT Fixed Go/No SeriesRun status based on currentWarning: Refer to installation instructions that accompany product and heed all safety instructions. EC MOTOR EC MOTORCERTIFIEDCERTIFIEDHigher Reliability, Faster Installation, Superior Accuracy | Sense the difference | 15 SPLIT COREC-2300OPTIONAL RELAYSPLIT CORE - MINIC-2200 SOLID COREC-1300 SOLID CORE - MINIC-1200 L: 2.5” H: 0.57” W: 2.23” A: 0.75”x. 0.75” ▪Add to 2300 series to get start/stop/status in a single device ▪Reduces the number of installed components... saves time and space ▪Removable relay facili-tates service ▪Mount sensor without removing conductor for installation savings ▪Clamp on conductor with iris, or use detach-able base to screw or DIN mount ▪Larger 0.75” aperture accomodates oversize conductors ▪Mount sensor without removing conductor for installation savings ▪Fits in small enclosures ▪Clamp on conductor with iris, or screw mount detachable base ▪Super small—fits anywhere ▪Low cost ▪Compact design ▪Aperture accomodates spade terminalsL: 1.78” H: .88” W: 1.31” A: 0.30” diameterL: 2.27” H: 1.04” W: 1.6” A: 0.52” diameterL: 2.00” H: .75” W: 1.75” A: .0.40”x 0.32”L: 0.84” H: .72” W: 2.06”CURRENT Fixed Go/No SeriesORDERING INFORMATIONSPLIT COREMin (on)Max AN.O. OutputC-23000.35A200A1.0A@30VAC/DCC-2300HV 0.35A 100A0.2A@120VACSPLIT CORE - MINIC-2200 0.5A 50A1.0A@30VAC/DCSOLID CORE C-13000.25A50A1.0A@30VAC/DCSOLID CORE - MINIC-12000.25A50A1.0A@30VAC/DCC-1200HV0.25A50A0.2A@120VACSPECIFICATIONSStandard Output Rating1.0A@30VAC/DCLine Voltage Output Rating0.2A@120VAC (-HV MODELS ONLY)Output TypeNO, solid-state FETTemperature Rating-15-60 ° CInsulation Class600V RMS. For use on insulated conductors only! Use minimum 75 ° C insulated conductorSensor PowerInducedFrequency Range50/60HzAperture (A)LHWAperture (A)Aperture (A)Aperture (A)COMMAND RELAYContact ratingCoilCR3-24N.O. 10A @ 125VAC24VAC/DC 15mA nom.CR4-24N.C. 10A @ 125VAC24VAC/DC 15mA nom.CR3-12N.O. 10A @ 125VAC9-12VDC 30mA nom.CR4-12N.C. 10A @ 125VAC9-12VDC 30mA nom.Next >