16 | 866-660-8864 | fax 503-296-2529 | www.senvainc.com Load Amps Factory calibrated 0A Sensor Output 4mA 0 VDC 20mA 5/10 VDC 30/60/120A 7 year limited warranty PROUDLY MADE IN USA Analog Current Sensors 0-5VDC, 0-10VDC, 4-20mA outputs Multiple selectable range split-cores Optional command relay Fixed ranges on solid-cores DESCRIPTION Senva analog transducers measure AC current and provide a proportional output for load trending and control. Choose from easy to install split- core or compact solid core. Selectable ranges and optional command relay make for a versatile transducer. APPLICATIONS ▪ Load trending ▪ Motor control ▪ Process control ▪ Fan/Pump status ▪Motor load jamming ▪ Lighting load levels Split-core switch selectable ranges (30, 60, 120A or 5, 10, 20A full scale ranges) ▪ Makes scaling easy ▪ Reduces inventory ▪ No call backs due to mis-sizing 0-5VDC, 0-10VDC, 4-20mA loop powered versions ▪ Versions compatible with any system Superior split core design for easy installation ▪ Mount sensor without removing conductor for installation savings ▪ Clamp on conductor with iris or use detachable base to screw or DIN mount ▪ Larger 0.75” aperture accomodates oversize conductors Snap-on command relay for unitary start/ stop/status ▪ Reduces the number of installed components… saves time and space ▪ Removable relay facilitates service Reliable and cost-effective ▪ Industry leading 7 year limited warranty FEATURES SPECIFICATIONS Temperature Rating-15-60 ° C Insulation Class 600V RMS. For use on insulated conductors only! Use minimum 75 ° C insulated conductor Frequency Range50/60Hz LINEAR ANALOG OUTPUTHigher Reliability, Faster Installation, Superior Accuracy | Sense the difference | 17 CONTROLLER INSULATED PRIMARY AC CONDUCTOR 600VAC MAX AI AI GND NOTE: Device IS polarity sensitive. v V+ Vdc CONTROLLER INSULATED PRIMARY AC CONDUCTOR 600VAC MAX V+ AI NOTE: Device IS polarity sensitive. v #! Rplace image? SOLID CORE C-130X ▪ Compact design ▪ Aperture accomodates spade terminals L: 2.27” H: 1.04” W: 1.6” A: 0.52” diameter Aperture (A) Warning: Refer to installation instructions that accompany product and heed all safety instructions. TYPICAL WIRING LOOP 4-20 MATYPICAL WIRING 0-5/10VDC OUTPUT SPLIT CORE C-234X OPTIONAL RELAYSOLID CORE C-120X L: 2.5” H: 0.57” W: 2.23” A: 0.75”x. 0.75” ▪ Mount sensor without removing conductor for installation savings ▪ Clamp on conductor with iris, or use detachable base toscrew or DIN mount ▪ Larger 0.75” apeture accomodates oversize conductors L: 0.84” H: .72” W: 2.06” ▪ Add to 234X series to get start/stop/status in a single device ▪ Reduces the number of installed components... saves time and space ▪ Removable relay facilitates service L: 1.78” H: .88” W: 1.31” A: 0.30” diameter ▪ Super small—fits anywhere ▪ Low cost CURRENT Analog Series ORDERING INFORMATION SPLIT CORE Range AOutputSensor Power C-234330A, 60A, 120A Selectable0 - 5 VDCInduced C-2344 30A, 60A, 120A Selectable0 - 10 VDCInduced C-234530A, 60A, 120A Selectable4 - 20mALoop- powered, 30 VDC C-2343-L5A, 10A, 20A Selectable0 - 5 VDCInduced C-2345-L5A, 10A, 20A Selectable4 - 20mALoop- powered, 30 VDC C-2343-200200A0 - 5 VDCInduced C-2344-200200A0-10 VDCInduced SOLID CORE - MINI C-120315 A0 - 5 VDCInduced C-120515 A4 - 20mALoop- powered, 30 VDC C-1203-L5 A0 - 5 VDCInduced C-1303-L5 A0 - 5 VDCInduced L H W Aperture (A) Aperture (A) COMMAND RELAY Contact ratingCoil CR3-24N.O. 10A @ 125VAC24VAC/DC 15mA nom. CR4-24N.C. 10A @ 125VAC24VAC/DC 15mA nom. CR3-12N.O. 10A @ 125VAC9-12VDC 30mA nom. CR4-12N.C. 10A @ 125VAC9-12VDC 30mA nom. CURRENTNext >