SmartX Damper Actuators Selection Guide Schneider Electric EcoBuilding Division | North America | 2019 www.schneider-electric.com © 2019 Schneider Electric. All rights reserved. F-27986-9 August, 2019 tc2 | schneider-electric.com: Actuators Product Family Matrix - North America F-27986-9 Contents 4 SmartX Spring-Return Direct Coupled Actuators 12 SmartX Non-Spring Return Direct Coupled Actuators 18 Damper Accessories About Specifications All performance specifications are nominal and conform to acceptable industry standards. For ap- plications at conditions beyond these specifications, consult Schneider Electric. Schneider Electric shall not be liable for damages resulting from product misapplication or misuse. iPortal Related documents are important for understanding full capabilities of each product. iPortal enables users to see the latest product associated documents for part numbers and product specifications online. Non-registered users may use a guest login as shown on the website. Registered users may view additional information including pricing structures. Contents in this document are subject to change without notice. Schneider Electric is the global specialist in energy management and automation. With revenues of ~€27 billion in FY2015, our 160,000+ employees serve customers in over 100 countries, helping them to manage their energy and process in ways that are safe, reliable, efficient and sustainable. From the simplest of switches to complex operational systems, our technology, software and services improve the way our customers manage and automate their operations. Our connected technologies reshape industries, transform cities and enrich lives. At Schneider Electric, we call this Life Is On. schneider-electric.com | 3 Actuators Product Family Matrix - North America F-27986-9 2 1 3 5 4 6 7 1 Ball Valve Actuator Assembly: VAV with Re-heat 2 Globe Valve Actuator Assembly: AHU hydronic temperature 3 Damper Actuator: AHU supply and return air control 4 Zone Valve: hydronic room control 5 Butterfly Valve Actuator Assembly: hydronic isolation 6 Globe Valve Actuator Assembly: hydronic control and delta-T 7 Damper Actuator: chiller guide vane control 4 | schneider-electric.com: Actuators Product Family Matrix - North America F-27986-9 SmartX Spring-Return Direct Coupled Actuators Mx4D-703x and Mx4D-803x Series • Two position models controlled by SPST controller • Floating models controlled by SPDT floating controllers • Jumper selectable control function direct/ reverse action Value-Driven General Purpose Applications High Performance HVAC Applications High Torque HVAC Applications Mx40-704x Series • Direct mount to round or square damper shaft • 35 lb-in (4 N-m) torque rating • Overload protection throughout rotation • Optional built-in auxiliary switches • True mechanical clockwise or counterclockwise spring return operation for reliable, positive close-off in airtight applications • Visual position indicator • Direct acting or reverse acting control mode available on proportional models • Rotation limiting available • Rugged die-cast housing for NEMA 2/IP54 rating Mx41-730x Series • 270 lb-in (30 N-m) of torque with mechanical spring return, manual override, and Brushless DC Motor. • Stall protected throughout rotation and reversible mounting. • Models for Two Position 24 Vac/Vdc, and Two Position 100…230 Vac applications. • Models for 2…10 Vdc input signal applications (field configurable for other input signals) with a position feedback signal and direct/reverse acting control mode selection switch on both sides. • Models for auxiliary switch applications. Mx41-7xxx Series • Direct mount to round or square damper shaft • 60 lb-in (7 N-m) torque rating • 133 lb-in (15 N-m) torque rating • Overload protection throughout rotation • Optional built-in auxiliary switches • Provides true mechanical clockwise or counterclockwise spring return operation for reliable positive close-off in airtight applications • Direct acting or reverse acting control mode available on proportional models • Rotation limiting available • Rugged die-cast housing for NEMA 2/IP54 rating • Manual override Damp and Harsh Environment Applications Mx40-717x Series • Direct mount to round or square damper shaft • 150 lb-in (17 N-m) torque rating, overload protection throughout rotation • Oil immersed gear train provides continuous lubrication • Automatic current sensing motor control provides extended reliability and repeatable timing • Provides true mechanical clockwise or counterclockwise spring return operation for reliable positive close-off in airtight applications • 5-year warranty, NEMA 4 housing (IEC IP56) • Can be double mounted (gang mounting) to accommodate high torque application requirements (2 to 4 actuators) • MS40-717x models provide position feedback signal Schneider Electric offers a complete line of Direct Coupled actuators for all your spring return actuator needs. Direct Coupled easy to install, Spring Return SmartX Actuators are available with torques that range from 30…150 lb-in for two position, floating or proportional control. • Models for NEMA 4 / IP66 outdoor applications. • 95° of rotation, adjustable with mechanical end stops and graduated position indicator showing 0°…95°. • Can be double-mounted (gang mounting) to accommodate high torque application requirements.F-27986-9 schneider-electric.com | 5 Actuators Product Family Matrix - North America Spring Return Electronic Damper Actuators Torque lb-in minimum Control Type 2…10 VDC a Feedback0…10 VDC Feedback PowerPower Input Running Time (sec) Auxiliary SwitchSpring Return PositionTwo-PositionFloating Proportional 24 VAC, 24 VDC230, 240 VAC120 VAC 100...240 VAC 100...125 VDCVA @60 Hz Watts @ 60 Hz PoweredSpring Return0…10 VDC2…10 VDC4…20 mARunningHolding MA4D-7030-000 30 7.85.02.5 <56<23 CCW MA4D-7033-100 5.1 MA4D-8030-000 7.85.02.5 CW MA4D-8033-100 5.1 MF4D-7033-100 6.84.21.9 8521 CCW MF4D-8033-100 CW MS4D-7033-100 6.13.41.4 CCW MS4D-7033-150 MS4D-7033-160 MS4D-8033-100 CW MS4D-8033-150 MS4D-8033-160 MA40-7040 35 4.33.41.2<80<40 CW/ CCW MA40-7040-501 1 MA40-7041 4.63.91.2 <50<28 MA40-7041-501 1 MA40-7043 4.42.90.8 MA40-7043-501 1 MF40-7043 5.94.42.9 <130<25 MF40-7043-501 1 MS40-7043 5.64.22.4 MS40-7043-501 1 MA41-7070 60 5.63.61.2<80<40 MA41-7070-502 2 MA41-7071 8.04.01.4 <80<40 MA41-7071-502 2 MA41-7073 4.83.20.8 MA41-7073-502 2 MF41-7073 6.24.82.8 <195 <30 MF41-7073-502 2 MS41-7073 5.84.62.3 MS41-7073-502 2 MA41-7150 133 10.08.43.3 <190 MA41-7150-502 2 MA41-7151 10.68.55.0 MA41-7151-502 2 MA41-7153 9.7 7.52.8 MA41-7153-502 2 MF41-7153 7.73.2 MF41-7153-502 2 MS41-7153 7.42.9 MS41-7153-502 2 MA40-7170 150 8.4<162<82 MS40-7170 8.5 <147<65 MS40-7171 10.8 MA40-7173 7.4<162 <82 MF40-7173 8.1<162 MS40-7173 7.8 <147<65 MA41-7303 270 16 1 9.5 4.5 75 <20 MA41-7303-502 2 MA41-7300 21 MA41-7300-502 2 MS41-7303 3 16 1 150 4 MS41-7303-502 3 2 MS41-7303-W02 3 2 MS41-7303-WH2 3 16 21 w/ heater 1 9.5 21 w/ heater 2 a - Proportional models with a 2…10 VDC control signal accept a 4…20 mA signal with the use of a 500 ohm resistor. 1 - Class 2 power source. 3 - Also compatible with floating, pulse width modulating (PWM), and other DC signal inputs with use of the BEL-ZTH US Handheld Interface Module for Field Programming. 4 - Timing field adjustable from 60…150 seconds with use of the BEL-ZTH US Handheld Interface Module for Field Programming.6 | schneider-electric.com Actuators Product Family Matrix - North America F-27986-9 Mx4D-703x and Mx4D-803x Series 30 lb-in Direct Coupled Damper Actuators Product Description Designed for controlling air dampers in building systems that require fail safe return, with two position, floating or proportional control. Part Number Torque lb-in (N-m) Spring Return Actuator InputsOutputs Approximate Timing in seconds @ 70°F ControlVoltage VA @ 60Hz Feedback Auxiliary Switch PoweredSpring Return MA4D-7033-100 30 (3.4) CCW 2 Position 24 Vac/dc5.1 — No 5623 MA4D-7030-000* 120 Vac7.8 MA4D-8033-100 CW 24 Vac/dc5.1 MA4D-8030-000* 120 Vac7.8 MF4D-7033-100 CCW Floating 24 Vac/dc 6.8 2…10 vdc 8521 MF4D-8033-100 CW MS4D-7033-100 CCW 2…10 vdc 6.1 MS4D-7033-150 0…10 vdc0…10 vdc MS4D-7033-160 4…20 ma 2…10 vdc MS4D-8033-100 CW 2…10 vdc MS4D-8033-150 0…10 vdc0…10 vdc MS4D-8033-160 4…20 ma2…10 vdc Specifications Control Signal Refer to the tables for actuator models and control types. Power InputsSee table. Connections3 ft (91 cm) appliance (see * in table below) or 10 ft. (3 m) plenum cables, enclosure accepts 1/2” (13 mm) conduit connector. Electrical Outputs Position Feedback Voltage (proportional or floating only): For voltage ranges, the feedback signal is the same range as the input signal. The 4…20 mA current range and floating actuators have a 2…10 Vdc feedback signal. The feedback signal can supply up to 0.5 mA to operate up to four additional slave actuators. Mechanical Outputs Travel: 93° nominal. Manual Override: Allows positioning of damper or valve using manual crank. RA/DA Jumper: Permits reverse acting/direct acting control (MS4D models only). Features • Two position models controlled by SPST controller • Floating models controlled by SPDT floating controllers • Jumper selectable control function direct/reverse action • Spring return models provide 30 in-lb (3.4 N-m) of torque • Polymer housing rated for NEMA 2/IP54 • Overload protection throughout stroke • Floating and proportional models automatically adjust input span to match the damper/valve travel • Compact size allows installation in limited space • Manual override allows positioning of dampers and valves • Directly mounts to 1/2…3” Schneider Electric ball valves • Polymer housing rated for plenum use Ambient Temperature Limits Shipping & Storage: -40…160°F (-40…71°C). Operating: -22…140°F (-30…60°C). Humidity: 15…95% RH, non-condensing. LocationNEMA 1. NEMA 2, UL Type 2 (IEC IP54) with customer supplied water tight conduit connectors. Enclosure is air plenum rated. Agency Listings UL 873: Underwriters Laboratories (File #E9429 Category Temperature-Indicating and Regulating Equipment). CUL: UL LISTED for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24-93. This product fits in Installation Category (Overvoltage Category) II per EN 61010-1. Applicable Literature F-27170 Installation Instructions schneider-electric.com | 7 Actuators Product Family Matrix - North America F-27986-9 Part Number Torque lb-in (N-m) Spring Return Actuator InputsOutputs Approximate Timing in seconds @ 70°F ControlVoltageVA @ 60HzFeedbackAuxiliary SwitchPoweredSpring Return MA40-7040 35 (4)CW/CCW 2 Position 120 Vac4.3 — — <50<28 MA40-7040-501 1-SPDT (250 Vac) MA40-7041 230 Vac4.6 — MA40-7041-501 1-SPDT (250 Vac) MA40-7043 24 Vac/dc 4.4 — MA40-7043-501 1-SPDT (24 Vac) MF40-7043 Floating 5.9 — <130<25 MF40-7043-501 1-SPDT (24 Vac) MS40-7043 2…10 vdc2…10 vdc — MS40-7043-501 1-SPDT (24 Vac) Mx40-704x Series 35 lb-in Direct Coupled Actuators Product Description For spring return applications requiring floating, two-position, or proportional modulation control of dampers and valves in HVAC sys- tems. Directly mounts to ½ "…3" Schneider Electric ball valves. Features • Direct mount to round or square damper shaft • 35 lb-in (4 N-m) torque rating • Overload protection throughout rotation • Optional built-in auxiliary switches • True mechanical clockwise or counterclockwise spring return operation for reliable, positive close-off in airtight applications • Visual position indicator • Direct acting or reverse acting control mode available on proportional models • Rotation limiting available • Rugged die-cast housing for NEMA 2/IP54 rating Specifications Control Signal On-off, SPST control contacts or Triacs (500 mA rated). Floating point control, 24 Vac. Proportional, 2…10 Vdc or 4 to 20 mA dc with a 500 W resistor. Power Inputs See table. ConnectionsMA40-704x and MA40-704x-501 — 3 ft. (91 cm) long, appliance cables, 1/2 in. conduit connector. For M20 Metric conduit, use AM-756 adaptor. MF40-7043 and MF40-7043- 501, MS40-7043 and MS40-7043-501 — 3 ft. (91 cm) long, plenum-rated cables, 1/2 in. conduit connector. For M20 Metric conduit, use AM-756 adaptor. Electrical Outputs Position Feedback Voltage “AO”: 2…10 Vdc (maximum 0.5 mA) output signal for position feedback or operation of up to four slave actuators. One auxiliary switch available (select models). SPDT 6a resistive @24 Vac or 250 Vac. Mechanical Outputs Travel Rotation is limited to 95° ± 5° maximum, adjustable from 40…95 ° with a mechanical stop. RA/DA Switch: selects direct acting or reverse acting for proportional models. Position Indicator: Visual indicator, 0…1 (0 is the spring-return position). Ambient Temperature Limits Shipping & Storage: -40 F…160°F (-40…71°C). Operating: -22…140°F (-30…60°C). Humidity: 5…95% RH, non-condensing. Location NEMA 2 (IEC IP54) Agency Listings UL 873: Underwriters Laboratories (File # E9429 Category Temperature-Indicating and Regulating Equipment). CUL: UL LISTED for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24.8 | schneider-electric.com Actuators Product Family Matrix - North America F-27986-9 Part Number Torque lb-in (N-m) Spring Return Actuator InputsOutputs Approximate Timing in seconds @ 70°F ControlVoltageVA @ 60HzFeedbackAuxiliary SwitchPoweredSpring Return MA41-7070 60 (7) CW/CCW 2 Position 120 Vac5.6 — — <80<40 MA41-7070-502 2-SPDT (250 Vac) MA41-7071 230 Vac8.0 — MA41-7071-502 2-SPDT (250 Vac) MA41-7073 24 Vac/dc4.8 — MA41-7073-502 2-SPDT (24 Vac) MA41-7150 133 (15) 120 Vac10.0 — <190 <30 MA41-7150-502 2-SPDT (250 Vac) MA41-7151 230 Vac10.6 — MA41-7151-502 2-SPDT (250 Vac) MA41-7153 24 Vac/dc 9.7 — MA41-7153-502 2-SPDT (24 Vac) MF41-7073 60 (7) Floating 6.2 — <195 MF41-7073-502 2-SPDT (24 Vac) MF41-7153 133 (15)9.7 — <190 MF41-7153-502 2-SPDT (24 Vac) MS41-7073 60 (7) 2…10vdc 5.8 2…10 vdc — <195 MS41-7073-502 2-SPDT (24 Vac) MS41-7153 133 (15)9.7<190 MS41-7153-502 2-SPDT (24 Vac) Mx41-7xxx Series 60 lb-in and 133 lb-in Direct Coupled Damper Actuators Product Description Designed for controlling air dampers in building systems that require fail safe return, with two position, floating or proportional control. Features • Direct mount to round or square damper shaft • 60 lb-in (7 N-m) and 133 lb-in (15 N-m) torque rating • Overload protection throughout rotation • Optional built-in auxiliary switches • Provides true mechanical clockwise or counterclockwise spring return operation for reliable positive close-off in airtight applications • Direct acting or reverse acting control mode available on proportional models • Rotation limiting available • Rugged die-cast housing for NEMA 2/IP54 rating • Manual override • 5-year warranty Specifications Control SignalOn-off, SPST control contacts or Triacs (500 mA rated). Floating point control, 24 Vac. Proportional, 2…10 Vdc or 4 to 20 mA dc with a 500 W resistor. Power Inputs See table. Connections 3 ft. appliance cables, 1/2 in. conduit connector. Electrical Outputs Position Feedback Voltage “AO”: 2…10 Vdc (maximum 0.5 mA) output signal for position feedback or operation of up to four slave actuators. Two auxiliary switches available (select models). SPDT 7a resistive @24 Vac or 250 Vac. Mechanical Outputs Travel Rotation is limited to 95° ± 5° maximum, adjustable from 30…95 ° with a mechanical stop. Position Indicator: Pointer and scale are provided. Manual Override: manual adjustable rotation -5°…85°. Ambient Temperature Limits Shipping & Storage: -40 F…160°F (-40…71°C). Operating: -22…140°F (-30…60°C). Humidity: 5…95% RH, non-condensing. Location NEMA 1, NEMA 2 (IEC IP54) with conduit connector in down position. Agency Listings UL 873: Underwriters Laboratories (File # E9429 Category Temperature-Indicating and Regulating Equipment). CUL: UL LISTED for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24. schneider-electric.com | 9 Actuators Product Family Matrix - North America F-27986-9 Part Number Torque lb-in (N-m) Spring Return Actuator InputsOutputsApproximate Timing in seconds @ 70°F ControlVoltage VA @ 60Hz Feedback Auxiliary Switch PoweredSpring Return MA40-7170 150 (17)CW/CCW 2-Position 120 Vac8.4 — No 16282 MA40-7173 24 Vac/dc 7.4 MF40-7173 Floating8.1 MS40-7170 2…10 vdc 120 Vac8.5 2…10 vdc14765 MS40-7171 240 Vac10.8 MS40-7173 24 Vac/dc7.8 Mx40-717x Series 150 lb-in Direct Coupled Actuators Product Description Designed for controlling air dampers in building systems that require fail safe return, with two position, floating or proportional control. Specifications Control SignalTwo wire, SPST or Triacs. SPDT floating control output, Triacs (500 mA rated), or 2 SPST contacts. Proportional, 2…10 Vdc or 4…20 mA dc with the addition of a 500 ohm resistor (not included). Power Inputs See table. ConnectionsClass 1: 24 inch (61 cm) long appliance cables, 18 AWG color coded leads. 1/2 in. conduit connector. Class 2 Power and Control: 36 inch (91 cm) Long, 22 AWG color coded appliance cable pigtail leads. 1/2 in. conduit connector. Electrical Outputs Travel: Electronically limited to 92° ±1° (MS). MF-MA Mechanically limited To 101° ±1°. Mechanical Outputs Position Indicator: Pointer and scale are provided. Ambient Temperature Limits Shipping & Storage: -40 F…160°F (-40…71°C). Operating: -25…140 °F (-32…60 °C). Humidity: 5…95% RH, non-condensing. LocationNEMA 1 (IEC IP10). NEMA 4 (IEC IP 56) with customer supplied water tight conduit connectors. Agency Listings UL 873, Underwriters Laboratories (File #9429 Category Temperature-Indicating and Regulating Equipment). Canadian Standards C22.2 No. 24-93. Applicable Literature Features • Direct mount to round or square damper shaft • 150 lb-in (17 N-m) torque rating, overload protection throughout rotation • Oil immersed gear train provides continuous lubrication • Automatic current sensing motor control provides extended reliability and repeatable timing • Provides true mechanical clockwise or counterclockwise spring return operation for reliable positive close-off in airtight applications • NEMA 4 housing (IEC IP56) • Can be double mounted (gang mounting) to accommodate high torque application requirements (2 to 4 actuators) • MS40-717x models provide position feedback signal • Linkage required for Globe Valve Assembly.Next >