All specifications subject to change without notice or liability to provide changes to prior purchasers, information and specifications published here are current as of the date of publication of this document. EasyIO reserves the right to change or modify specifications without prior notice. The latest product specifications can be found by contacting us. EasyIO Holdings Pte Ltd. E info@easyio.com W www.easyio.com - EasyIO Europe B.V. E info@easyio.eu W www.easyio.eu EasyIO FR relay module EasyIO-FR-02 The FR-02 is a relay module which can be mounted on dinrail. It allows 1 x AO coming from a controller to pro- vide floating control via two built-in relays. The modes 1 or 2 are selected by a jumper on the FR-02. Relays rated for 5 million cycles. Input Rating: Power Supply 24Vac(+/-5%), 20VA or 24Vdc(+15%/-15%), 15VA, Class 2 Analog Input Voltage 0-10 Vdc, Class 2 Output Rating: Digital Outputs 24V AC/DC 2A (48VA) (SPST N.O. dry contact) Do not mount: • In an area where excessive moisture, corrosive fumes or explosion vapors are present. • Where excessive vibration or shocks are likely to occur. • On a location with excessive electrical noise, such as large magnet- ic interference or variable speed drive modules. MODE 1 (FLOATING MODE) Stage Min Volt Max Volt Optimum Volt DO 1 State DO 2 State 1 0.00 1.00 0.00 OFF OFF 2 1.10 5.00 3.00 ON OFF 3 5.10 6.00 5.50 OFF OFF 4 6.10 10.00 8.00 OFF ON MODE 2 (STAGING MODE) Stage Min Volt Max Volt Optimum Volt DO 1 State DO 2 State 1 0.00 2.50 2.00 OFF OFF 2 2.60 5.00 3.50 ON OFF 3 5.10 7.50 6.50 OFF ON 4 7.60 10.00 8.50 ON ON Next >