EasyIO FD20i EasyIO FD20i 20-POINT IO EXPANSION MODULE The FD-20i provides input point expansion capacity for all FS, FG+ and FW series controllers. The FD20i has 20 input points, supports BACnet MSTP or Modbus RTU as a selectable function and is equipped with a RS485 port. The inputs include 10 Digital Inputs (DI) and 10 Universal Inputs (UI) supporting resistance based (10K or 20K) or digital dry contact. SPECIFICATIONS Power Supply 24V AC +/- 5% or 24V DC +20% / - 15% Consumption< 11VA Current Rating < 500mA at 24VAC/VDC Storage Temp-20 to 85 oC ( -4 to 185 oF ) Operating Temp0 to 65 0C (32 to 150 oF) Operating Humidity10% to 90% Relative Humidity non-condensing Dimension192 x 104 x 44 (mm), 7.5 x 4.1 x 1.7 (inches) MaterialPlastic conforms with UL Weight410g / 14.4 oz Main Processor48 Mhz ARM Cortex A0 Flash Memory256KB RAM32KB RS 485 Ports1 x RS485 Protocols SupportedBACnet MSTP Server, Modbus RTU Master Modbus Baud RateSpeed : (9.6K, 19.2k, 38.4K, 57.6K), Data Bits : 8 , Parity : Odd, Even, None BACnet Baud RateSpeed : 9.6K, 19.2k, 38.4K, 76.8K Universal Inputs10 x UI , 12-bit ADC with PGA. Resistance Mode : 400 - 300K Ohms (+/- 10 Ohms).Thermistor sensor supported : NTC 10k Type 2/3 and NTC 20k (+/- 0.1 °C) Digital Inputs10 x DI, Voltage free contact SKUEasyIO-FD-20i Warranty CertificationsCE, BTL, UL, FCC, RoHS Engineer ToolCPT Product and Engineering LicenseIncluded Annual MaintenanceIncluded Contactwww.easyio.com © 2020 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject to change without notice.Next >