EasyIO FC-20 EasyIO FC-20 20-POINT IO EXPANSION CONTROLLER The EasyIO FC20 is a cost-effective programmable controller, selectable between BACnet or Modbus. This versatile controller can be used for many applications such as RTU, AHU, FCU, small plant control, or as dummy inputs/outputs. The FC20 has twelve (12) universal inputs (UI) supporting current, voltage and resistance-based sensors, 4 electrically isolated digital outputs (DO) and 4 analog outputs supporting current and voltage outputs. SPECIFICATIONS Power Supply 24V AC +/- 5% or 24V DC +20% / - 15% Consumption< 11VA Current Rating < 500mA at 24VAC/VDC Storage Temp-20 to 85 oC ( -4 to 185 oF ) Operating Temp0 to 65 0C (32 to 150 oF) Operating Humidity10% to 90% Relative Humidity noncondensing Dimensions191 x 104 x 44 (mm), 7.5 x 4.1 x 1.7 (inches) MaterialPlastic conforms with UL Weight410g / 14.4 oz Main Processor24 MHz ARM Cortex-M3 Flash Memory256KB RAM24KB RS 485 Ports2 x RS485 Protocols SupportedBACnet MSTP Server / Modbus RTU (Selectable by DIP Switch) Modbus Baud RateSpeed : (9.6K, 19.2k, 38.4K, 57.6K) , Data Bits : 8 , Parity : Odd, Even, None BACnet Baud RateSpeed : 9.6K, 19.2k, 38.4K, 76.8K Universal Inputs 12 x UI , 12-bit ADC with PGA Resistance Mode : 400 - 300K Ohms (+/- 10 Ohms) Voltage Mode : output range 0-10V DC, Min Load Impedance 2,000 Ohm. Maximum 5ma current draw Current mode: 0-20mA Max Load Impedance 800 Ohm. Impedance < 25 Ohms Pulse count mode (max): 20 Pulse per sec at 50% duty cycle (20Hz) 4 channels only Digital mode : Voltage Free Contact Digital Output4 x DO (with LED Indicator), Type: Relay Contacts, SPST NO, 48VA/2A at 24V SKUEasyIO-FC-20 Warranty Certiļ¬cationsCE, BTL, UL, FCC Engineer ToolCPT Product and Engineering License Included Annual MaintenanceIncluded Contactwww.easyio.com Ā© 2020 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject to change without notice.Next >