Operating Manual TH7000 Series Touchscreen Programmable Thermostat TH7220U1035 69-2667ES-0369-2667ES—03 Read and save these instructions. Need Help? For assistance with this product please visit honeywellhome.com/support or call Customer Care toll-free at 1-800-468-1502 BE CAREFUL! Never use sharp instruments, such as a pencil or pen, to press touchscreen keys. To prevent damage to the thermostat, always press keys with your fingertip. This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate This manual covers the following models TH7220U: For up to 2 Heat/2 Cool systems (Pull thermostat from wallplate and turn over to find model number) M293431 69-2667ES—03 About your new thermostat Thermostat features ........................................2 Programming at a glance.............................3 Quick reference to controls .........................4 Quick reference to status display .............5 Programming & Operation Clock setting .......................................................6 Fan setting ...........................................................7 System setting ...................................................8 Using program schedules ............................9 Program schedule overrides ....................12 Special features ..............................................14 Furnace filter reminder ...............................15 Special features ..............................................16 Screen lock ........................................................17 Appendices Battery replacement ....................................18 Advanced functions ......................................19 In case of difficulty........................................25 Optional remote sensors ...........................27 Limited warranty ............................................28 This thermostat is ready to go! Your new thermostat is pre- programmed and ready to go. See page 3 to check settings. CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50 ˚F (10 ˚C). TH7000 Series Table of contentsOperating Manual 2 69-2667ES—03 About your new thermostat Congratulations! You’ve just purchased the world’s most advanced, easy-to-use ther- mostat. It has been designed to give you many years of reliable service and touch- screen climate control. Features • 7-day program schedules maximize comfort and economy. • Armchair programming: Just pull thermostat from the wall to set schedules. • Energy-saving settings for maximum cost savings. • One-touch temp control overrides program schedule at any time. • Precise comfort control keeps temperature within 1°F of the level you set. • Change/check reminders let you know when to service or replace filters, batteries and other critical components. • Large touchscreen display with backlight is easy to read—even in the dark. • Select models accommodate optional outdoor or indoor remote sensors.TH7000 Series 3 About your new thermostat 69-2667ES—03 Your new thermostat is pre-programmed and ready to go. Just set the time and day. Then check the settings below and change if needed: 1. Set clock ...........................................................................................................................................See page 6 2. Select fan setting: Preset to Auto .......................................................................................See page 7 3. Select system setting: Preset to Heat ..............................................................................See page 8 4. Program schedules: Preset to energy-saving levels while you’re at work or asleep (assumes you wake at 6 am, leave at 8 am, return at 6 pm and go to bed at 10 pm) ................................................................................................See pages 9-11 ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and manually adjust the temperature (see pages 11-13). This thermostat is ready to go!Operating Manual 4 69-2667ES—03 Mon System & FanSchedule Clock & More M31502 System Cool Fan Auto Set To Cool On AM 75 75 6 : 01 System & Fan Press to select fan operation (see page 7) or system type (see page 8) Arrow keys Press to adjust temperature (see pages 11–14), or to make selections from screen menus. Schedule Press to set program schedule (see page 11). Clock & More Press to set clock (see page 6) or furnace filter reminder. Quick reference to controls If the screen backlight is off, the first button press will only activate the backlight, and the button must be pressed again.TH7000 Series 5 69-2667ES—03 Mon System & FanSchedule Clock & More M31503 System Cool Fan Auto Recovery Set To Cool On AM 75 75 6 : 01 Current inside temperature Current day of week Temperature setting Fan setting (see page 7) Other display messages: • Cool On: Cooling system is activated • Heat On: Heating system is activated • Aux Heat On: Auxiliary heating system is activated Quick reference to status display System setting (see page 8) Adaptive Intelligent Recovery in effect (see page 16) Current timeOperating Manual 6 69-2667ES—03 MCR31505 Go BackDoneNext AM 6:01 M31504 System & FanSchedule Clock & More To set the current time, press CLOCK & MORE , then press s or t to adjust the time. Press and hold s or t to advance the time more quickly. Press DONE to save & exit (or press GO BACK to exit without changing the time). Note: The real-time clock should never require adjustment since it automatically updates for daylight saving time, and stores all date/time information. Note: To change the current week day display, see pages 19-20. Press CLOCK & MORE Adjust time, then press DONE Clock settingTH7000 Series 7 69-2667ES—03 M27529 SystemFan Done System Heat Fan Auto M31504 System & FanSchedule Clock & More Press SYSTEM & FAN to select fan operation: • On: Fan is always on. • Auto : Fan runs only when the heating or cooling system is on. Fan setting Press SYSTEM & FAN Press FAN to select mode, then press DONENext >