DS-EIS00000-CA0 EIS SHEET data CTRLink ® EIS Ethernet Switch — UL 864 Compliant For Fire Alarm Systems All Ethernet Interconnect Switch models offer UL 864 compliance as Component Control Units and Accessories for Fire Alarm Systems. The EIS8-100T offers eight ports for twisted-pair cabling. If greater distance or galvanic isolation is required, three models offer two fi bre ports to accommodate a fi bre backbone and four twisted- pair ports for local drops. Both the EIS6-100T/FC and the EIS6-100T/FT use multimode fi bre. The EIS6-100T/FCS uses single-mode fi bre. Each twisted-pair port automatically optimises its data rate to 10 Mbps or 100 Mbps. The data rate offi bre ports is fi xed at 100 Mbps. Each port negotiatesfl ow control with the PAUSE function for full-duplex links and the backpressure scheme for half-duplex links. The switch front-panel features LEDs for link status, port activity, and data rate of each port. All units operate from low-voltage AC or DC power and are DIN-rail or panel mountable. Plug-and-Play Functionality • Auto-negotiated data rate, duplex, fl ow control, and cabling, on copper ports • 10BASE-T/100BASE-TX/100BASE-FX compliant • Full- or half-duplex operation on copper ports Standards Compliant •UL 864 10th Ed. Recognized Component — Control Units and Accessories for Fire Alarm Systems •UL 508 Listed, Industrial Control Equipment •C-UL Listed, CSA 22.2 No. 14-M91, Industrial Control Equipment •CE Mark •RoHS compliant •Industrial environment EMC compatible DS-EIS00000-CA0Page 2 Data Sheet — EIS Underwriters Laboratories 864 Recognized Component Contemporary Controls has recently re-qualifi ed the EIS Series to comply with UL 864 Control Units and Accessories for Fire Alarm Systems 10th Edition. All new fi re alarm and smoke control systems being installed claiming UL 864 compliance must comply with this latest edition. The UL recognized component mark is rarely seen by the customer but is often part of a larger end- product that is UL Listed by the fi re alarm system supplier. For an end-product to be listed, UL tests the product to determine that it meets the requirements UL’s published Standards of Safety. A UL-recognized component has already been tested to comply with UL’s component safety standards — streamlining the qualifi cation process for the end-product. To specify the EIS Ethernet switch for use in a system, a fi re alarm system supplier needs no additional testing on this component. Several fi re alarm and security fi rms have specifi ed the EIS series as part of their system — thereby improving their time-to-market. Components that bear the UL Recognized Component mark are separately covered under UL’s Follow-Up Surveillance program to ensure continued compliance and prevent unpleasant surprises when an end-product is inspected. UL 864 10th Edition governs safety of fi re alarm systems and equipment in accordance with these standards: Adjustable Mounting Bracket can be extended for panel mounting or retracted for DIN-rail mounting. NFPA 12, Carbon Dioxide Extinguishing Systems NFPA 12A, Halon 1301 Fire Extinguishing Systems NFPA 13, Installation of Sprinkler Systems NFPA 15, Water Spray Fixed Systems for Fire Protection NFPA 16, Installation of Foam-Water Sprinkler and Foam-Water Spray Systems NFPA 17, Dry Chemical Extinguishing Systems NFPA 17A, Wet Chemical Extinguishing Systems NFPA 70, National Electrical Code NFPA 72, National Fire Alarm Code NFPA 92A, Recommended Practice for Smoke-Control Systems NFPA 92B, Guide for Smoke Management Systems in Malls, Atria, and Large Areas NFPA 2001, Clean Agent Fire Extinguishing Systems. Metal Enclosure rugged packaging for rough environments Power LED power OK indicator Link LED verifi es working equipment is attached High Speed LED indicates 100 Mbps SC or ST Connectors support a fi bre backbone at 100 Mbps, 1300 nm Shielded 10/100 Ports support Auto-MDIX and auto-negotiation Power Connector detachable for easy fi eld service and offers terminal for attaching backup power supplyDS-EIS00000-CA0Page 3 Data Sheet — EIS Specifi cations Power Requirements EIS8-100T: 10–36 VDC 6 W or 8–24 VAC 6 VA 47–63 Hz Fibre models: 10–36 VDC 10 W or 8–24 VAC 10 VA 47–63 Hz Operating Temperature 0°C to 60°C Storage Temperature –40°C to 85°C Relative Humidity 10–95%, non-condensing Protection IP30 Mounting TS-35 DIN-rail or panel mounting via extendable brackets Shipping Weight 1 lb (0.45 kg) Ethernet Communications IEEE 802.3 10/100 Mbps data rate 10BASE-T and 100BASE-TX using RJ-45 connectors, 100 m (max) 100BASE-FX multimode using SC or ST connectors, 2 km (max) 100BASE-FX single-mode using SC connectors, 15 km (max) LEDs Power Green = power OK Link Green = communication established (fl ashing = activity) HS Yellow = 100 Mbps communication in progress Regulatory Compliance UL 864 10th Ed. Recognized Component, Control Units and Accessories for Fire Alarm Systems ULC-S527-11 Control Units for Fire Alarm Systems UL 508 Industrial Control Equipment CE Mark; CFR 47, Part 15 Class A; RoHS; RJ-45 Connector Pin AssignmentsMechanical Drawing PinFunction 1TD+ 2TD– 3RD+ 4N/C 5N/C 6RD– 7N/C 8N/C MDI and MDIXDS-EIS00000-CA0 — October 2015Page 4 Data Sheet — EIS Power Considerations Ordering Information ModelDescription EIS8-100T EIS6-100T/FC EIS6-100T/FCS EIS6-100T/FT 3RUW0ESV8/(,66ZLWFK 3RUW0ESV3RUW006&ILEHU8/(,66ZLWFK 3RUW0ESV3RUW606&ILEHU8/(,66ZLWFK 3RUW0ESV3RUW0067ILEHU8/(,66ZLWFK Applied voltage must be within the specifi ed range and deliver a current commensurate with power consumption. The recommended size for solid power conductors is 16–20 AWG; and for stranded conductors use 16–18 AWG. Zero volts (COM) is isolated from chassis (earth). Input connections are reverse-polarity protected. Connecting chassis to earth or using a backup source is always optional. Typical Installations CConteempooraryyCCCooonntrol SSystems,Inc. 2431CCurtissssSttreeeet DDownersGGroveee,ILLL66005155 UUSA TTel: +11630096337070700 FFax:+1163009633300011099 infoo@@ccoontrools..coom wwww.ccoonttrools.ccoom CChinna CContempooraryyCCooontrrolss (SSuzhou)CCCo.LLLtdtdd 11 HuoojuRRooad SSciencce&TTechhnonoolooggyy IndusstrialPPParkk NNewDistriccct,Suuuzhzhoouu PPRChina222150000999 TTel: +865122688009959588666 FFax:++86511266880099937760 infoo@@ccoontrools..coom.cnn wwww.ccoonttrools.aassia UUnitttedKKingdomm CContemporraryCCCoononttroolsLLtd SSovereeignCCCourrrttTwTwwo UUniverrsityooffWaaarwwwiicckk SScience Paaark SSirWilliamLLyonnnssRRoaadd CCoventryCCVV4777EEZZZ UUnitedd Kinggddommm TTel: +44(0))22477664411337786 FFax:+444(0))2247767641441339923 infoo@@ccoonttrols.ccoo.uk wwww..ccoontrrolls.eeu GGerrrmaany CConteempoorarryryCCCoonntrools GGmbHH FFuggerstraaße 1BBB 0041588Leiippziggg GGermmany TTel: +493344155520203355990 FFax:++49333415552202033559116 infoo@@ccconntrrols..de wwwww.cconntrrolss.eeu AC Powered AC Powered with Grounded Secondary DC PoweredRedundant DC Powered AC Powered with Battery BackupNext >