DS-EIGRE000-AB8 Data Sheet – EIGR-E Series The EIGR-E series consists of high-speed routers that link two 10/100/1000 Mbps Internet Protocol (IPv4) networks — passing appropriate traffic while blocking all other traffic. One network is the local-area-network (LAN); the other is the wide-area-network (WAN). The built-in stateful firewall passes communication initiated on the LAN-side while blocking WAN-side initiated communication. With Port Address Translation (PAT), LAN-side clients can access the Internet. Network Address Translation (NAT) allows a one-to-one translation between LAN-side and WAN-side devices. With Port Forwarding, LAN- side devices can be accessed from the Internet. The EIGR-E incorporates a four-port Ethernet switch for multiple LAN-side connections. An external Ethernet-based modem — cable or DSL — can be used to connect to the Internet. DSL modems connect via the PPPoE protocol. The EIGR-E operates over 0 to 60°C temperature range and the EIGR-EX operates over −40 to +75°C temperature range. EIGR-E Series — Skorpion Gigabit Wired IP Routers EIGR-E Skorpion Gigabit IP Router Features… • Web page configuration • 10/100/1000 Mbps WAN port • 4-port 10/100/1000 Mbps Ethernet LAN switch • PAT, NAT, Port Forwarding and Port Range Forwarding • NAT Loopback • Remote Router Access • Allowlist • Stateful firewall • DHCP client (WAN) and DHCP server (LAN) • DIN-rail mounting • Diagnostic LEDs • CE Mark, RoHS, UL 508, C22.2 No. 142-M1987 • 24 VAC/VDC powered • Operates over 0 to 60°C (EIGR-E) • Operates over −40 to +75°C (EIGR-EX) EIGR-EEIGR-EXDS-EIGRE000-AB8 Data Sheet – EIGR-E Series 3.95” 100 mm (distance to DIN-rail) (typical) WAN STATUSPWR RESET 1 2 3 4 H L LAN All ports are Auto-MDIX. EIGR-E — Skorpion Gigabit IP Router Although the EIGR-E has many of the same features found in high-end routers, it is simpler to install and commission. A resident DHCP server on the LAN- side will provide IP addresses to LAN-side clients while a DHCP client on the WAN-side will accept IP address assignments from the attached network. Static addressing is accommodated as well. Configuration is via a web browser using authentication. With a DIN-rail mounting clip, rugged metal enclosure and the ability to be powered from a low-voltage AC/DC power source, the EIGR-E is ideal IP router for automation systems. Connector Pin Assignments Ethernet RJ-45 Pin Assignments PinFunction 1BI_DA+ 2BI_DA- 3BI_DB+ 4BI_DC+ 5BI_DC- 6BI_DB- 7BI_DD+ 8BI_DD- Quick Disconnect 4-pin Power Connector provides connections to a DC or AC source and a connection for a backup source Power LED Power OK indicator 35 mm Din-rail Clip for convenient control panel installation Built-in Ethernet Switch connect up to four 10/100/1000 Mbps Ethernet devices with auto-negotiation and Auto-MDIX Diagnostic LEDs indicate the status of Link and Activity Reset Switch returns the EIGR-E to its default settings Writable Label for a helpful record of connected IP devices Mechanical Drawing 10-36 VDC 7 W 24 VAC ± 10% 11 VA 47-63 HzDS-EIGRE000-AB8 Data Sheet – EIGR-E Series Web Page Configuration Onboard HelpDS-EIGRE000-AB8 Data Sheet – EIGR-E Series STATUSPWR RESET 1 2 3 4 WAN H L LAN Power Considerations Applied voltage must be in the specified range and deliver a current commensurate with pow consumption. The recommended size for solid power conductors is 16–20 AWG; and for stranded conductors use 16–18 AWG. Zero volts (COM) is isolated from chassis (earth). Input connections are reverse-polarity protected. Stateful Firewall — Promotes Secure Communication The lower part of the router connects the LAN side (the local-area- network). The upper part connects the WAN side (wide-area- network). A firewall (which can be disabled by the user) separates the two parts. A firewall controls the passing of messages from one side of a router to the other. A stateful firewall acts on the structure of the message and who is initiating and who is responding. Originating requests from the LAN side and corresponding responses from the WAN side pass through the firewall. But traffic originating from the WAN side is blocked from the LAN side unless the firewall is adjusted to allow it. This protects the LAN side from unauthorised WAN access. LAN inbound or outbound requests or replies WAN inbound or outbound traffic WAN requests are blocked unless firewall is changed to allow them.DS-EIGRE000-AB8 Data Sheet – EIGR-E Series June, 2018 www.ccontrols.com Model RoHS Description EIGR-E Skorpion GigE IP Router 0 to 60°C EIGR-EX Skorpion GigE IP Router −40 to +75°C Ordering Information Specifications Power Requirements 10–36 VDC ±10% 7 W or 24 VAC ±10% 11 VA 47–63 Hz Operating Temperature 0 to 60°C (EIGR-E) −40 to +75°C (EIGR-EX) Storage Temperature −40 to +85°C Relative Humidity 10–95%, non-condensing Protection IP30 Mounting TS-35 DIN-rail Ethernet Communications IEEE 802.3 10/100/1000 Mbps data rate 10BASE-T, 100BASE-TX and 1000BASE-T 100 m (max) CAT5e cable length LEDs PWR Green = Power OK STATUS Green = Boot up complete H Green = 1000 Mbps communication established Yellow = 100 Mbps communication established Flash = Activity L Yellow = 10 Mbps Flash = Activity Regulatory Compliance CE Mark; CFR 47, Part 15 Class A; RoHS; UL 508; C22.2 No. 142-M1987Next >