EIGR C3

DS-EIGRC300-AA0 Data Sheet – EIGR-C3 The EIGR-C3 is a high-speed router that links cellular to 10/100/1000 Mbps Internet Protocol (IPv4) networks — passing appropriate traﬃc while blocking all other traﬃc. One network is the local-area-network (LAN); the cellular is the wide-area-network (WAN). It also has an Ethernet port that can act as the WAN if cellular access is not required. The built-in stateful ﬁrewall passes communication initiated on the LAN-side while blocking WAN-side initiated communication. With Port Address Translation (PAT), LAN-side clients can access the Internet. The EIGR-C incorporates a built-in cellular modem that works with Verizon, a real-time clock and OpenVPN client functionality compatible with the Cloud-VPN service from Contemporary Controls (RemoteVPN). The EIGR-C3 operates over 0 to 60°C temperature range and the EIGR-C3X operates over −40 to +75°C range. EIGR-C3 – Skorpion Gigabit IP Router with Cellular (Verizon) EIGR-C3 Skorpion Gigabit Cellular IP Router Features… • Web page conﬁguration • LTE Cellular or 10/100/1000 Mbps WAN port • 4-port 10/100/1000 Mbps Ethernet LAN switch • OpenVPN Client (compatible with RemoteVPN) • PAT, NAT, Port Forwarding and Port Range Forwarding • NAT Loopback • Remote Router Access • Allowlist • Stateful ﬁrewall • DHCP client (WAN) and DHCP server (LAN) • DIN-rail mounting • Diagnostic LEDs • CE Mark, RoHS, UL 508, C22.2 No. 142-M1987 • 24 VAC/VDC powered • Operate over 0 to 60°C (EIGR-C3) • Operates over −40 to +75°C (EIGR-C3X) EIGR-C3EIGR-C3XDS-EIGRC300-AA0 Data Sheet – EIGR-C3 3.95” 100 mm (distance to DIN-rail) (typical) WAN STATUSPWR RESET 1 2 3 4 H L S I M LAN All ports are Auto-MDIX. EIGR-C3 — Skorpion Gigabit IP Router Although the EIGR-C has many of the same features found in high-end routers, it is simpler to install and commission. A resident DHCP server on the LAN-side will provide IP addresses to LAN-side clients. Conﬁguration is via a web browser using authentication. With a DIN-rail mounting clip, rugged metal enclosure and the ability to be powered from a low-voltage AC/DC power source, the EIGR-C is ideal for automation systems. Connector Pin Assignments Ethernet RJ-45 Pin Assignments PinFunction 1BI_DA+ 2BI_DA- 3BI_DB+ 4BI_DC+ 5BI_DC- 6BI_DB- 7BI_DD+ 8BI_DD- Quick Disconnect 4-pin Power Connector provides connections to a DC or AC source and a connection for a backup source 35 mm Din-rail Clip for convenient control panel installation Writable Label for a helpful record of connected IP devices nano-SIM Socket (pre-installed SIM) Mechanical Drawing 10-36 VDC 10 W 24 VAC ± 10% 17 VA 47-63 Hz EIGR-C 10/100/1000 Mbps Cellular Ethernet Ip Router Power LED Power OK indicator SMA Connectors to attach antennas Antennas for communication to cellular networks (sold separately) Built-in Ethernet Switch connect up to four 10/100/1000 Mbps Ethernet devices with auto-negotiation and Auto-MDIX Diagnostic LEDs indicate the status of Link and Activity Reset Switch returns the EIGR-C to its default settingsDS-EIGRC300-AA0 Data Sheet – EIGR-C3 Web Page Conﬁguration Onboard HelpDS-EIGRC300-AA0 Data Sheet – EIGR-C3 Power Considerations Applied voltage must be in the speciﬁed range and deliver a current commensurate with pow consumption. The recommended size for solid power conductors is 16–20 AWG; and for stranded conductors use 16–18 AWG. Zero volts (COM) is isolated from chassis (earth). Input connections are reverse-polarity protected. Stateful Firewall — Promotes Secure Communication The lower part of the router connects the LAN side (the local-area- network). The upper part connects the WAN side (wide-area-network). A ﬁrewall (which can be disabled by the user) separates the two parts. A ﬁrewall controls the passing of messages from one side of a router to the other. A stateful ﬁrewall acts on the structure of the message and who is initiating and who is responding. Originating requests from the LAN side and corresponding responses from the WAN side pass through the ﬁrewall. But traﬃc originating from the WAN side is blocked from the LAN side unless the ﬁrewall is adjusted to allow it. This protects the LAN side from unauthorised WAN access. LAN inbound or outbound requests or replies WAN inbound or outbound trafﬁc WAN requests are blocked unless ﬁrewall is changed to allow them. STATUSPWR RESET 1 2 3 4 H L S I M LANDS-EIGRC300-AA0 Data Sheet – EIGR-C3 July, 2020 www.ccontrols.com Model RoHS Description EIGR-C3 Skorpion GigE IP Router with Cellular (Verizon) 0 to 60°C EIGR-C3X Skorpion GigE IP Router with Cellular (Verizon) −40 to +75°C * Antennas sold separately Ordering Information Speciﬁcations Power Requirements 10–36 VDC ±10% 10 W or 24 VAC ±10% 17 VA 47–63 Hz Operating Temperature 0 to 60°C (EIGR-C3) −40 to +75°C (EIGR-C3X) Storage Temperature −40 to +85°C Relative Humidity 10–95%, non-condensing Protection IP30 Mounting TS-35 DIN-rail Ethernet Communications IEEE 802.3 10/100/1000 Mbps data rate 10BASE-T, 100BASE-TX and 1000BASE-T 100 m (max) CAT5e cable length Cellular LTE CAT 1, Verizon Certiﬁed, Bands B4 and B13 Antennas* - Main and Receive Diversity SIM Size - nano-SIM/4FF (pre-installed) FCC ID: 2AU57EIGR-C3 LEDs PWR Green = Power OK STATUS Green = Boot up complete H Green = 1000 Mbps communication established Yellow = 100 Mbps communication established Flash = Activity L Yellow = 10 Mbps Flash = Activity Regulatory Compliance CE Mark; CFR 47, Part 15 Class A; RoHS; UL 508; C22.2 No. 142-M1987Next >