DS-EIBA5000-BB0 EIBA Series SHEET data CTRLink ® C ONTRLSO ® CONTEMPORARY An expanding need exists for Ethernet switches in many Building Automation Systems (BAS). The 5-port Plug-and- Play (PnP) BAS Switch is ideal for low-cost 10/100 Mbps Ethernet switching applications where equipment is mounted in shallow-depth control cabinets. No configuration is needed. Each port automatically sets its data rate and duplex using the Auto-negotiation protocol. Communication matches the capability of the link partner: either 10 Mbps or 100 Mbps and either half- or full-duplex. Each port adapts to either a straight-through or crossover cable using the Auto-MDIX protocol. There is no need to stock crossover cables for switch-to-switch cabling. Each unit is housed in a rugged metal enclosure and can be either panel or DIN-rail mounted. A writable label allows listing the location of field devices connected to each port. The half-wave rectified low-voltage power supply allows sharing 24 VAC/VDC with other devices. LEDs for data rate and activity aid in troubleshooting. Unlike office-grade Ethernet equipment which is not adaptable to control panels, the BAS Switch makes an Ethernet installation neat, professional, and dependable. 5-Port BAS Switch Ethernet Built for Buildings Simple to Install and Use ... • DIN-rail and panel-mountable versions • Auto-MDIX and auto-negotiated communication • Industrial temperatures: 0°C to +60°C • 10BASE-T/100BASE-TX compliant • Industrial environment EMC compatible • UL 508 Listed, Industrial Control Equipment • CE Mark and RoHS compliant • Diagnostic LEDs • 10–36 VDC and 24 VAC (± 10%) 47–63 Hz • Power through a quick-disconnect terminal strip • Writable label for listing connected devicesDS-EIBA5000-BB0Page 2 Data Sheet — EIBA Series C ONTRLSO ® CONTEMPORARY Mechanical Drawings C L 3.31”(84 mm) 2.88” (73 mm) 4.13”(105 mm) 3.63” (92 mm) 0.80” (20 mm) 0.63” (16 mm) 3.5” (89 mm) 1.25” (32 mm) EIBA5-100T/R Din-rail Mount EIBA5-100T Panel MountDS-EIBA5000-BB0Page 3 Data Sheet — EIBA Series C ONTRLSO ® CONTEMPORARY Specifications Power Requirements 10–36 VDC 3 W or 24 VAC ±10% 6 VA 47–63 Hz Operating Temperature 0°C to 60°C Storage Temperature –40°C to 85°C Relative Humidity 10–95%, non-condensing Protection IP30 Mounting TS-35 DIN-rail Shipping Weight 1 lb (0.45 kg) Ethernet Communications IEEE 802.3 10/100 Mbps data rate using RJ-45 connectors, 100 m (max) LEDs Power Green = power OK Port LEDs Green = 100 Mbps communication established Yellow = 10 Mbps communication established Flashing = data transmissions occurring Regulatory Compliance CE Mark; CFR 47, Part 15 Class A; RoHS; UL 508 Industrial Control Equipment PinFunction 1TD+ 2TD– 3RD+ 4Not Used 5Not Used 6RD– 7Not Used 8Not Used RJ-45 Connector Pin AssignmentsDS-EIBA5000-BB0 — May 2014Page 4 Data Sheet — EIBA Series C ONTRLSO ® CONTEMPORARY Power Considerations Applied voltage must be in the specified range and deliver a current commensurate with power consumption. The recommended size for solid power conductors is 16–20 AWG; and for stranded conductors use 16–18 AWG. Zero volts (COM) is isolated from chassis (earth). Input connections are reverse-polarity protected. Typical Switch Installations Ordering Information ModelDescription EIBA5-100T EIBA5-100T/R 5-Port 10/100Mbps Panel Mount BAS Switch Five-port 5-Port 10/100Mbps DIN-rail Mount BAS Switch Accessories ModelDescription AI-XFMR AI-XFMR-E Wall-mount plug-in transformer, 120 VAC input/24 VAC output (nominal values) Wall-mount plug-in transformer, 230 VAC input/24 VAC output (nominal values)Next >