800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 26 Technical Data Servicechilled, hot water, 60% glycol, steam to 50 psi Flow characteristicmodified equal percentage, unidirectional Controllable flow range82° Sizes 2” to 24" Type of end fittingfor use with ASME/class 125/150 flange Materials Body Disc Seat Shaft Gland seal Bushings carbon steel full lug 316 stainless steel RPTFE 17-4 PH stainless PTFE glass backed PTFE Media temperature range-20°F to 400°F [-30°C to 204°C] Body pressure ratingANSI Class 150 Close-off pressure285 psi Rangeability100:1 (for 30 deg to 70 deg range) Maximum velocity32 FPS Leakagebubble tight •Bubble tight shut-off to ANSI Class 150 Standards •Long stem design allows for 2” insulation minimum • Valve Face-to-face dimensions comply with API 609 & MSS-SP-68 •Designed to be installed between ASME/ANSI B16.5 Flanges •Completely assembled and tested, ready for installation Application These valves are designed to meet the needs of HVAC and Commercial applications requiring positive shut-off for liquids at higher pressures and temperatures. Typical applications include chiller isolation, cooling tower isolation, change-over systems, large air handler coil control, bypass and process control applications. The large C values provide for an economical control valve solution for larger fl ow applications. Dead End Service Utilizes larger retainer ring set screws to allow the valve to be placed at the end of the line without a down stream fl ange in either fl ow direction while still holding full pressure. MODON/OFF ValveSize10°20°30°40°50°60°70°80°90° F650-150SHP2” 1021.506.10142639567799102 F665-150SHP2½” 1462.208.8020375580110142146 F680-150SHP3” 2283.4014325787125171221228 F6100-150SHP4” 4516.802763114171248338437451 F6125-150SHP5” 7141143100180271393536693714 F6150-150SHP6” 1103176615427841960782710701103 F6200-150SHP8” 2064311242895207841135154820022064 F6250-150SHP10” 35175321149288613361934263834113517 F6300-150SHP12” 483773290677121918382660362846924837 F6350-150SHP14” 685790392914164624813592489865306857 F6400-150SHP16” 92871325311230222933614865663488459287 F6450-150SHP18” 114001716841596 3873 4332627085501127011400 F6500-150SHP20” 144202078281932347852447590103501380014420 F6600-150SHP24” 22050315126029405292789011550157502100022050 F6 Series 2-Way, ANSI Class 150 Butterfly Valve Reinforced Tefl on Seat, 316 Stainless Disc 2-way Valves Suitable Actuators Valve Nominal Size TypeNon Fail-Safe Fail-Safe Spring Return Electronic C v 90° C v 60° InchesANSI 150 2-way150300150300150300 102562F650-150SHP GM Series PR Series GM Series PR Series AF SeriesAF SeriesGK SeriesGK Series 146802½F665-150SHP 228125F680-150SHP 451248F6100-150SHP 714392F6125-150SHP PKR PKR 1103607F6150-150SHP 206411358F6200-150SHP SY Series (2 Year Warranty) SY (2 Year Warranty) 3517193410F6250-150SHP 4837266012F6300-150SHP 6857359214*F6350-150SHP 9287486516*F6400-150SHP 11400627018*F6450-150SHP 14420759020*F6500-150SHP 220501155024*F6600-150SHP 50904 - 02/12 - Subject to change. © Belimo Aircontrols ( USA ) , Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 27 Maximum Dimensions (Inches) ValveSizeC v 90°ABCD(Max)BHCNo. of HolesLug BoltActuatorClose-Off (PSI) F650-150SHP2”1021.759.009.0019.504.755/8-11 UNC 2*AF 150 prin g Return F665-150SHP2½”1461.889.009.0020.005.505/8-11 UNC150 F680-150SHP3”2281.929.009.0020.506.005/8-11 UNC150 F6100-150SHP4”4512.139.009.0021.007.505/8-11 UNC150 F650-150SHP2”1021.759.009.0019.504.755/8-11 UNC GK 285 lectronic Fail- S afe F665-150SHP2½”1461.889.009.0020.005.505/8-11 UNC285 F680-150SHP3”2281.929.009.0020.506.005/8-11 UNC285 F6100-150SHP4”4512.139.009.0021.007.505/8-11 UNC150 F6100-150SHP4”4512.139.009.0021.007.505/8-11 UNC2*GK285 F650-150SHP2”1021.759.009.0019.504.755/8-11 UNC GM 285 on-Sprin g Retur n lectronic Fail- S afe ( K ) F665-150SHP2½”1461.889.009.0020.005.505/8-11 UNC285 F680-150SHP3”2281.929.009.0020.506.005/8-11 UNC285 F6100-150SHP4”4512.139.009.0021.007.505/8-11 UNC150 F6100-150SHP4”4512.139.009.0021.007.505/8-11 UNC2*GM285 F650-150SHP2”1021.7510.0015.0014.004.755/8-11 UNC PR/PK 285 F665-150SHP2½”1461.8810.0016.0014.005.505/8-11 UNC285 F680-150SHP3”2281.9210.0017.0015.006.005/8-11 UNC285 F6100-150SHP4”4512.1310.0018.0016.007.505/8-11 UNC285 F6125-150SHP5”7142.2510.0019.0016.008.503/4-10 UNC285 F6150-150SHP6”11032.2910.0020.0017.009.503/4-10 UNC285 F6200-150SHP8”20642.5012.0012.0032.0011.753/4-10 UNCSY4…285 F6250-150SHP10”35172.8112.0012.0033.0014.25127/8-9 UNCSY4…285 F6300-150SHP12”48373.2312.0012.0035.0017.00127/8-9 UNC SY4…150 SY5…285 F6350-150SHP14”68573.6214.0014.0036.0018.75121-8 UNC SY5…150 SY7… 285 150 F6400-150SHP16”92874.0014.0014.0037.5021.25161-8 UNCSY8…285 F6450-150SHP18”114004.5014.0014.0042.2522.75161 1/8-8 UNC SY7…150 SY8…285 F6500-150SHP20”144205.0014.0014.0049.5025.00201 1/8-8 UNC SY8…150 SY10…285 F6600-150SHP24”220506.0614.0014.0056.2529.50201 1/4-8 UNCSY10…150 F6 Series 2-Way, ANSI Class 150 Butterfly Valve Reinforced Tefl on Seat, 316 Stainless Disc Dimension “A” does not include flange gaskets. (2 required per valve) Application Notes 1. Valves are rated at 285 psi differential pressure in the closed position @ 100°F media temperature. 2. Valves are furnished with lugs tapped for use between ANSI Class 125/150 flanges conforming to ANSI B16.5 Standards. 3. 2-way assemblies are furnished assembled, calibrated and tested, ready for installation. 4. Dimension “D” allows for actuator(s) removal without the need to remove the valve from the pipe. 5. Weather shields are available, dimensional data furnished upon request. 6. Flange gaskets (2 required, not provided with valve) MUST be used between valve and ANSI flange. 7. Flange bolts are not included with the valve. These are furnished by others. Dimensions D BC A BHC D10 2 SHP series valves have a preferred flow direction. Pre f erredFlowrat e A C B D 50904 - 02/12 - S ubject to change. © Belimo Aircontrols ( U S A ) , Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 28 •Bubble tight shut-off to ANSI Class 150 Standards • Long stem design allows for 2” insulation minimum • Valve Face-to-face dimensions comply with API 609 & MSS-SP-68 •Designed to be installed between ASME/ANSI B16.5 Flanges • Completely assembled and tested, ready for installation • Tees comply with ASME/ANSI B16.1 Class 125 Flanges Application These valves are designed to meet the needs of HVAC and Commercial applications requiring positive shut-off for liquids at higher pressures and temperatures. Typical applications include chiller isolation, cooling tower isolation, change-over systems, large air handler coil control, bypass and process control applications. The large C values provide for an economical control valve solution for larger fl ow applications. Dead End Service Utilizes larger retainer ring set screws to allow the valve to be placed at the end of the line without a down stream fl ange in either fl ow direction while still holding full pressure. MODON/OFF ValveSize10°20°30°40°50°60°70°80°90° F750-150SHP2”1021.506.10142639567799102 F765-150SHP2½1462.208.8020375580110142146 F780-150SHP3”2283.4014325787125171221228 F7100-150SHP4”4516.802763114171248338437451 F7125-150SHP5”7141143100180271393536693714 F7150-150SHP6”1103176615427841960782710701103 F7200-150SHP8”2064311242895207841135154820022064 F7250-150SHP10”35175321149288613361934263834113517 F7300-150SHP12”483773290677121918382660362846924837 F7350-150SHP14”685710341196017282606 3592 514366516857 F7400-150SHP16”9287139557130023403529 4865 696590089287 F7450-150SHP18”11400171684159628734332627085501105811400 F7 Series 3-Way, ANSI Class 150 Butterfly Valve Reinforced Tefl on Seat, 316 Stainless Disc Technical Data Servicechilled, hot water, 60% glycol, steam to 50 psi Flow characteristicmodified equal percentage, unidirectional Controllable flow range82° Sizes 2" to 18 " Type of end fi ttingfor use with ASME/class 125/150 flanges Materials Body Disc Seat Shaft Gland seal Bushings carbon steel full lug 316 stainless steel RPTFE 17-4 PH stainless PTFE glass backed PTFE Media temperature range-20°F to 400°F [-30°C to 204°C] Body pressure ratingANSI Class 150 Close-off pressure285 psi Rangeability100:1 (for 30 deg to 70 deg range) Maximum velocity32 FPS Leakagebubble tight 3-way ValvesSuitable Actuators Valve Nominal Size TypeNon Fail-Safe Electronic Fail-Safe C v 90° C v 60° InchesANSI 150 3-way150300150300 F750-150SHP GM Series PR Series GM Series PR SeriesGK Series GK Series 2½F765-150SHP F780-150SHP F7100-150SHP PKR F7125-150SHP SY Series (2 Year Warranty)SY Series (2 Year Warranty) F7150-150SHP F7200-150SHP 10F7250-150SHP 12F7300-150SHP 14*F7350-150SHP 16*F7400-150SHP 18*F7450-150SHP 50904 - 02/12 - Subject to change. © Belimo Aircontrols ( USA ) , Inc. 102 146 228 451 714 1103 2064 3517 4837 6857 9287 11400 80 125 248 393 607 1135 1934 2660 3592 4865 6270 56800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 29 Maximum Dimensions (Inches) ValveSizeC v 90°ABCD(Max)BHCNo. of HolesLug BoltActuatorClose-Off (PSI) F750-150SHP2”1024.506.386.3816.504.7545/8-11 UNC GK 150Electronic Fail-Safe F765-150SHP2½”1465.006.886.8817.005.5045/8-11 UNC 150 F780-150SHP3”2285.507.567.5617.506.0045/8-11 UNC 150 F750-150SHP2”1024.506.386.3816.504.7545/8-11 UNC 2*GK 285 F765-150SHP2½”1465.006.886.8817.005.5045/8-11 UNC 285 F780-150SHP3”2285.507.567.5617.506.0045/8-11 UNC 285 F750-150SHP2”1024.506.386.3816.504.7545/8-11 UNC GM 150 N on- S pring Return Electronic Fail-Safe (K) F765-150SHP2½”1465.006.886.8817.005.5045/8-11 UNC150 F780-150SHP3”2285.507.567.5617.506.0045/8-11 UNC150 F7100-150SHP4”4516.508.638.6318.007.5085/8-11 UNC150 F750-150SHP2”1024.506.386.3816.504.7545/8-11 UNC 2*GM 285 F765-150SHP2½”1465.006.886.8817.005.5045/8-11 UNC285 F780-150SHP3”2285.507.567.5617.506.0045/8-11 UNC285 F750-150SHP2”1024.506.386.3814.004.7545/8-11 UNC PR/PK 285 F765-150SHP2½”1465.006.886.8814.505.5045/8-11 UNC285 F780-150SHP3”2285.507.567.5615.006.0045/8-11 UNC285 F7100-150SHP4”4516.508.638.6316.007.5085/8-11 UNC285 F7125-150SHP5”7147.509.759.7524.258.5083/4-10 UNC SY4… 285 F7150-150SHP6”11038.0010.2510.2524.759.5083/4-10 UNC285 F7200-150SHP8”20649.0011.5011.5032.0011.7583/4-10 UNCSY4…150 F7250-150SHP10”351711.0013.8113.8133.0014.25127/8-9 UNC SY4…150 SY5…285 F7300-150SHP12”483712.0015.8115.8135.0017.00127/8-9 UNC SY5…150 SY7…285 F7350-150SHP14”685714.0017.6217.6236.0018.75121-8 UNCSY7…285 F7400-150SHP16”928715.0019.0019.0037.5021.25161-8 UNC SY7…150 SY9…285 F7450-150SHP18”1140016.5021.0021.0042.2522.75161 1/8-8 UNC SY8…150 SY10…285 F7 Series 3-Way, ANSI Class 150 Butterfl y Valve Reinforced Tefl on Seat, 316 Stainless Disc Note: For tee configuration, please refer to page 5. Dimensions “A, B and C” do not include fl ange gaskets. (3 required per valve) Application Notes 1. Valves are rated at 285 psi differential pressure in the closed position @ 100°F media temperature. 2.Valves are furnished with lugs tapped for use between ANSI Class 125/150 flanges conforming to ANSI B16.5 Standards. 3.3-way assemblies are furnished assembled with Tee, calibrated and tested, ready for installation. All 3-way assemblies require the customer to specify the 3-way configuration code prior to order entry to guarantee correct place- ment of valves and actuator(s) on the assembly. 4. Dimension “D” allows for actuator(s) removal without the need to remove the valve from the pipe. 5. Weather shields are available, dimensional data furnished upon request. 6. Dual actuated valves have single actuators mounted on each valve shaft. 7.Flange gaskets (3 required, not provided with valve) MUST be used between valve and ANSI flange. 8. Flange bolts are not included with the valve. These are furnished by others. SHP series valves have a preferred flow direction. Pre f erredFlowrat e Dimensions 0 S D C AB D104 B,C D A 50904 - 02/12 - S ubject to change. © Belimo Aircontrols ( U S A ) , Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 43 Application: The SY actuators are NEMA 4X rated and designed to meet the needs of HVAC and Commercial applications. Offered on Belimo standard and high performance valve series, these actuators are available for on/off and modulating applications. Depending on the application, they are available in 24 VAC/ VDC, 120 VAC and 230 VAC. Technical Data Electrical connection½” conduit connector, screw terminals Motor protectionH Class insulation (SY-1), F Class (SY-2…5) Gear trainhigh alloy steel gear sets, self locking Operating range(SY…-24) on/off, floating point (SY...24MFT) 2-10 VDC, 4-20 mA, 0-10 VDC Sensitivity(SY…24MFT) 0.4 mA/200mV Reversal hysteresis(SY…24MFT)1.0 mA/500mV Feedback(SY…24MFT) 2-10 VDC Angle of rotation90° Direction of rotationreversible Position indicationtop mounted domed indicator Internal humidity controlresistive heating element Auxiliary switchesfactory set for 5° and 85° change of state SY1: (2) SPDT, min 1 mA, 24 VAC; max 3A, 250 VAC. SY4-12: (2) SPDT, min 1 mA, 24 VAC; max 5A, 250 VAC. Ambient temperature-22°F to +150°F [-30°C to +65°C] Humidity rangeup to 95% Housing typeIP67, NEMA 4X Housing materialdie cast aluminum alloy Agency listingsISO, CE, cCSAus Power Supply24 VAC/VDC 50/60Hz, single phase ModelTorqueSpeed Power Consumption Duty Cycle OverrideWeightOn/OffMFT SY4-24(MFT)400Nm/3560 in-lbs 16s6.0A30%75%Hand Wheel22kg/48.5 lb. SY5-24(MFT)500Nm/4450 in-lbs 22s6.5A30%75%Hand Wheel22kg/48.5 lb. SY...24V Series Non-Spring Return Actuator Technical Data - 24 VAC 50904 - 02/12 - S ubject to change. © Belimo Aircontrols ( U S A ) , Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 44 Application: The SY actuators are NEMA 4X rated and designed to meet the needs of HVAC and Commercial applications. Offered on Belimo standard and high performance valve series, these actuators are available for on/off and modulating applications. Depending on the application, they are available in 24 VAC/ VDC, 120 VAC and 230 VAC. Technical Data Electrical connection½” conduit connector, screw terminals Motor protectionH Class insulation (SY-1), F Class (SY-2…12) Gear trainhigh alloy steel gear sets, self locking Operating range(SY…-110) on/off, floating point (SY...120MFT) 2-10 VDC, 4-20 mA, 0-10 VDC Sensitivity(SY…120MFT) 0.4 mA/200mV Reversal hysteresis(SY…120MFT) 1.0 mA/500mV Feedback(SY…120MFT) 2-10 VDC Angle of rotation90° Direction of rotationreversible Position indicationtop mounted domed indicator Internal humidity controlresistive heating element Auxiliary switchesfactory set for 5° and 85° change of state SY1: (2) SPDT, min 1 mA, 24 VAC; max 3A, 250 VAC. SY4-12: (2) SPDT, min 1 mA, 24 VAC; max 5A, 250 VAC. Ambient temperature-22°F to +150°F [-30°C to +65°C] Humidity rangeup to 95% Housing typeIP67, NEMA 4X Housing materialdie cast aluminum alloy Agency listingsISO, CE, cCSAus Note: Leakage current is possible (<3.5 mA). Connect ground before applying voltage. Power Supply120 VAC 50/60Hz, single phase ModelTorque Speed 60Hz Speed 50Hz Power Consumption Duty Cycle OverrideWeightOn/OffProportional SY4-120(MFT)400Nm/3560 in-lbs16s18s1.3A30%75%Hand Wheel22kg/48.5 lb. SY5-120(MFT)500Nm/4450 in-lbs22s25s1.5A30%75%Hand Wheel22kg/48.5 lb. SY6-120(MFT)650Nm/5785 in-lbs28s31s1.8A30%75%Hand Wheel22kg/48.5 lb. SY7-120(MFT)1000Nm/8900 in-lbs46s55s3.2A30%75%Hand Wheel36kg/79.5 lb. SY8-120(MFT)1500Nm/13350 in-lbs46s55s4.0A30%75%Hand Wheel36kg/79.5 lb. SY9-120(MFT)2000Nm/17800 in-lbs58s70s3.2A30%50%Hand Wheel56kg/123.5 lb. SY10-120(MFT)2500Nm/22250 in-lbs58s70s4.0A30%50%Hand Wheel56kg/123.5 lb. SY11-120(MFT)3000Nm/26700 in-lbs58s70s3.0A30%50%Hand Wheel56kg/123.5 lb. SY12-120(MFT)3500Nm/31150 in-lbs58s70s4.0A30%50%Hand Wheel56kg/123.5 lb. SY...120V Series Non-Spring Return Actuator Technical Data - 120 VAC 50904 - 02/12 - Subject to change. © Belimo Aircontrols ( USA ) , Inc .800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 45 Application: The SY actuators are NEMA 4X rated and designed to meet the needs of HVAC and Commercial applications. Offered on Belimo standard and high performance valve series, these actuators are available for on/off and modulating applications. Depending on the application, they are available in 24 VAC/ VDC, 120 VAC and 230 VAC. Power Supply230 VAC 50/60Hz, single phase ModelTorque Speed 60Hz Speed 50Hz Power Consumption Duty Cycle OverrideWeightOn/OffMFT SY4-230(MFT)400Nm/3560 in-lbs16s18s0.6A30%75%Hand Wheel22kg/48.5 lb. SY5-230(MFT)500Nm/4450 in-lbs22s25s0.7A30%75%Hand Wheel22kg/48.5 lb. SY6-230(MFT)650Nm/5785 in-lbs28s31s0.8A30%75%Hand Wheel22kg/48.5 lb. SY7-230(MFT)1000Nm/8900 in-lbs46s55s1.6A30%75%Hand Wheel36kg/79.5 lb. SY8-230(MFT)1500Nm/13350 in-lbs46s55s2.0A30%75%Hand Wheel36kg/79.5 lb. SY9-230(MFT)2000Nm/17800 in-lbs58s70s1.6A30%50%Hand Wheel56kg/123.5 lb. SY10-230(MFT)2500Nm/22250 in-lbs58s70s2.0A30%50%Hand Wheel56kg/123.5 lb. SY11-230(MFT)3000Nm/26700 in-lbs58s70s1.6A30%50%Hand Wheel56kg/123.5 lb. SY12-230(MFT)3500Nm/31150 in-lbs58s70s2.2A30%50%Hand Wheel56kg/123.5 lb. Technical Data Electrical connection½” conduit connector, screw terminals Overload protectionthermally protected 135°C cut-out Motor protectionH Class insulation (SY-1), F Class (SY-2…12) Gear trainhigh alloy steel gear sets, self locking Operating range(SY…-220) on/off, floating point (SY...230MFT) 2-10 VDC, 4-20 mA, 0-10 VDC Sensitivity(SY…230MFT) 0.4 mA/200mV Reversal hysteresis(SY…230MFT) 1.0 mA/500mV Feedback(SY…230MFT) 2-10 VDC Angle of rotation90° Direction of rotationreversible Position indicationtop mounted domed indicator Internal humidity controlresistive heating element Auxiliary switchesfactory set for 5° and 85° change of state SY1: (2) SPDT, min 1 mA, 24 VAC; max 3A, 250 VAC. SY4-12: (2) SPDT, min 1 mA, 24 VAC; max 5A, 250 VAC. Ambient temperature-22°F to +150°F [-30°C to +65°C] Humidity rangeup to 95% Housing typeIP67, NEMA 4X Housing materialdie cast aluminum a lloy Agency listingsISO, CE, cCSAus SY...230V Series Non-Spring Return Actuator Technical Data - 230 VAC 50904 - 02/12 - S ubject to change. © Belimo Aircontrols ( U S A ) , Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 46 A D SY-9~12... SY-7~8... SY-2~6... MODELDIM A (MAX) Add to Dim A for cover removal DIM BDIM C (MAX)DIM D Inches [mm]Inches [mm]Inches [mm]Inches [mm]Inches [mm] SY4~612.40 [315]8.86 [225]9.21 [234]14.96 [380]11.81 [300] SY7~816.54 [420]8.86 [225]9.21 [234]17.72 [450]13.39 [340] SY9~1223.23 [590]8.86 [225]10.24 [260]18.50 [470]13.78 [350] SY... Series Non-Spring Return Actuator Dimensions 50904 - 02/12 - Subject to change. © Belimo Aircontrols ( USA ) , Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN 47 Butterfly Valve Actuators Power Supply 24 VAC/VDC Single Phase Model #Torque Speed 50 Hz/60 Hz Current Draw (50 Hz) Current Draw (60 Hz) W (50 Hz) W (60 Hz) VA (50 Hz) VA (60 Hz) OverrideWeight PRBUP-3-T*1400 in-lbs/ 160 Nm35 seconds0.8 A0.8 A20202020Manual override crank5.8 kg/12.8 lbs. PRXUP-3-T*1400 in-lbs/ 160 Nm 35, 30-120 seconds 0.8 A0.8 A20202020Manual override crank5.8 kg/12.8 lbs. SY4-243540 in-lbs/ 400 Nm30 seconds9.5 A9.5 A208212228228Hand wheel22 kg/48.5 lbs. SY5-244430 in-lbs/ 500 Nm35 seconds9.3 A9.4 A178168223227Hand wheel22 kg/48.5 lbs. Power Supply 120 VAC Single Phase Model #TorqueSpeed 50 HzSpeed 60 Hz Current Draw (50 Hz) Current Draw (60 Hz) W (50 Hz) W (60 Hz) VA (50 Hz) VA (60 Hz) OverrideWeight PRBUP-3-T*1400 in-lbs/ 160 Nm35 seconds35 seconds0.2 A0.2 A18182323Manual override crank5.8 kg/12.8 lbs. PRXUP-3-T*1400 in-lbs/ 160 Nm 35, 30-120 seconds 35, 30-120 seconds 0.2 A0.2 A18182323Manual override crank5.8 kg/12.8 lbs. SY4-1103540 in-lbs/ 400 Nm21 seconds18 seconds2.2 A1.8 A240196264216Hand wheel22 kg/48.5 lbs. SY5-1104430 in-lbs/ 500 Nm29 seconds25 seconds2.2 A1.8 A242193264216Hand wheel22 kg/48.5 lbs. SY6-1105750 in-lbs/ 650 Nm37 seconds32 seconds2.2 A1.8 A247198264216Hand wheel22 kg/48.5 lbs. SY7-1108850 in-lbs/ 1000 Nm59 seconds49 seconds6.4 A3.5 A670385768420Hand wheel36 kg/79.5 lbs. SY8-11013280 in-lbs/ 1500 Nm60 seconds50 seconds8.2 A4.8 A847514984576Hand wheel36 kg/79.5 lbs. SY9-11017700 in-lbs/ 2000 Nm68 seconds57 seconds2.7 A2.8 A304311324336Hand wheel72 kg/176.4 lbs. SY10-11022130 in-lbs/ 2500 Nm75 seconds62 seconds2.8 A2.9 A318335336348Hand wheel72 kg/176.4 lbs. SY11-11026550 in-lbs/ 3000 Nm78 seconds69 seconds3.3 A3.6 A365387396432Hand wheel72 kg/176.4 lbs. SY12-11030980 in-lbs/ 3500 Nm72 seconds60 seconds3.7 A3.8 A415422444456Hand wheel72 kg/176.4 lbs. Power Supply 230 VAC Single Phase Model #TorqueSpeed 50 Hz Speed 60 Hz Current Draw (50 Hz) Current Draw (60 Hz) W (50 Hz) W (60 Hz) VA (50 Hz) VA (60 Hz) OverrideWeight PRBUP-3-T*1400 in-lbs/ 160 Nm35 sec.35 sec.0.2 A0.2 A20205252Manual override crank5.8 kg/12.8 lbs. PRXUP-3-T*1400 in-lbs/ 160 Nm35, 30-120 sec.35, 30-120 sec.0.2 A0.2 A20205252Manual override crank5.8 kg/12.8 lbs. SY4-2203540 in-lbs/ 400 Nm21 seconds18 seconds1.1 A0.9 A221180253207Hand wheel22 kg/48.5 lbs. SY5-2204430 in-lbs/ 500 Nm29 seconds25 seconds1.1 A0.9 A216179253207Hand wheel22 kg/48.5 lbs. SY6-2205750 in-lbs/ 650 Nm38 seconds31 seconds1.0 A0.9 A193177230207Hand wheel22 kg/48.5 lbs. SY7-2208850 in-lbs/ 1000 Nm58 seconds48 seconds1.8 A1.4A381290414322Hand wheel36 kg/79.5 lbs. SY8-22013280 in-lbs/ 1500 Nm59 seconds49 seconds1.9 A1.4 A428294437322Hand wheel36 kg/79.5 lbs. SY9-22017700 in-lbs/ 2000 Nm68 seconds57 seconds1.6 A2.4 A356509368552Hand wheel72 kg/176.4 lbs. SY10-22022130 in-lbs/ 2500 Nm73 seconds62 seconds1.7 A2.5 A377531391579Hand wheel72 kg/176.4 lbs. SY11-22026550 in-lbs/ 3000 Nm46 seconds64 seconds1.8 A2.5 A397547414579Hand wheel72 kg/176.4 lbs. SY12-22030980 in-lbs/ 3500 Nm74 seconds61 seconds1.8 A2.4 A409505414552Hand wheel72 kg/176.4 lbs. *-200 and -250 versions have the same ratings. 50904 - 02/12 - Subject to change. © Belimo Aircontrols ( USA ) , Inc .Next >