Technical Data140311Servicechilled or hot water and steamApplicable Valve Size2” [51], 2-1/2” [64], 3” [80], 4” [101], 5” [127], 6” [152]Stem316 stainless steelFrame, plate, basealuminum, steel (fits Warren Type 20,22,23,30, and 32) and Belimo G6/G7CollarsteelCouplingGF Nylon suppliedHousing MaterialAluminum die cast and plastic casingStem AdaptorsteelStroke2” [50 mm]Mounting Position360°Media Temperature Range (Water)20°F to 250°F [-7°C to 120°C]Media Temperature Range (Steam)32°F to 338°F [0°C to 170°C]Weight5.7 lb [2.6 kg]For close-off pressure reference Select Pro or Retrofit Technical Documentation.ApplicationThe WGVL retrofit kit is designed to easily attach AVK, EV and RV series actuators to select Warren globe valves. Its casted base and lower lock nut allow the WGVL to be mounted on 2-1/2” to 6” two-way or three-way valves in both normally open and normally closed configurations.OperationThe WGVL linkage with actuator will provide 50 mm of linear travel to accommodate a wide range of valve sizes.Default/ConfigurationThe default set up for a WGVL linkage will be factory installed along with an AVK or EV, RV series actuator. Included in the kit will be all the necessary hardware to facilitate mounting to the Warren valve.Suitable Actuators Non-SpringElectronic Fail-SafeWGVLEVB(X), RVB(X)AVKB(X)Dimensions (Inches [mm])BCDAEVB, EVX, RVB, RVXABCD10.2” [259]5.50” [139.7]9.20” [234]12.22” [310.4]WGVL Warren Globe Valve LinkageFor Use with AVK and EV and RV Series Actuators800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 08/12/2016 - Subject to change. © Belimo Aircontrols (USA), Inc.Dimensions (Inches [mm])BCDAAVKB, AVKXABCD10.4”’ [264]5.50” [139.7]10.3”’ [262]10.9” [276]WGVL Warren Globe Valve LinkageFor Use with AVK and EV and RV Series Actuators800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 08/12/2016 - Subject to change. © Belimo Aircontrols (USA), Inc.Technical Data102691Power Supply24 VAC ± 20%, 50/60 HzPower Consumption Running5 W Power Consumption Holding2 W Transformer Sizing9.5 VA (class 2 power source)Electrical Connection3 ft, 18 GA plenum rated cable with 1/2” conduit connector protected NEMA 2 (IP54)Overload Protectionelectronic throughout full strokeElectrical Protectionactuators are double insulatedOperating Range Yon/off, floating pointInput Impedance100 k Ω (0.1 mA), 500 Ω, 1000 Ω (on/off)Feedback Output UNo FeedbackStroke1.25” [32 mm]Linear Force450 lbf [2000 N force] Direction of Rotation (Motor)reversible with switchDirection of Rotation (Fail-Safe)reversible with switchPosition Indicationstroke indicator on bracketManual Override5 mm hex crank (3/16” Allen), suppliedRunning Time (Motor)90 sec, constant independent of loadRunning Time (Fail-Safe)35 secBridge Time2 sec delay before fail-safe activatesPre-charging Time5 to 20 secondsHumidity5 to 95% RH non-condensingAmbient Temperature Range-22°F to +122°F [-30°C to +50°C]Storage Temperature Range-40°F to +176°F [-40°C TO +80°C]HousingNEMA 2, IP54, UL enclosure type 2Housing MaterialAluminum die cast and plastic casingAgency Listings†cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/ECNoise Level (Motor)<60 dB (A) Noise Level (Fail-Safe)<60 dB (A) Servicingmaintenance freeQuality StandardISO 9001Weight6.4 lb [2.9 kg]† Use flexible metal conduit. Push the listed conduit fitting device over the actuator’s cable to butt against the enclosure. Screw in conduit connector. Jacket the actuators input wiring with listed flexible conduit. Properly terminate the conduit in a suitable junction box. Rated impulse Voltage 800V. Type of action 1. Control pollution degree 3.AVKB24-3On/Off, Floating Point, Electronic Fail-Safe, Linear, 24 V800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 08/12/2016 - Subject to change. © Belimo Aircontrols (USA), Inc.Wiring DiagramsINSTALLATION NOTESMeets cULus requirements without the need of an electrical ground connection.Provide overload protection and disconnect as required.Actuators may be connected in parallel. Power consumption and input impedance must be observed.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 VAC line.Actuators may be connected in parallel if not mechanically linked. Power consumption and input impedance must be observed.Actuators with plenum cable do not have numbers; use color codes instead.!WARNING! LIVE ELECTRICAL COMPONENTS!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury. Y2 Input24 VAC Transformer (AC Only)Blk (1) - CommonRed (2) + Hot Wht (3) LineVoltsY1 InputPnk (4) 111On/Off 24 VAC Transformer (AC Only)Y2 InputBlk (1) - CommonRed (2) + HotWht (3) Y1 Input LineVoltsPnk (4) 1112Floating PointAVKB24-3On/Off, Floating Point, Electronic Fail-Safe, Linear, 24 V800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 08/12/2016 - Subject to change. © Belimo Aircontrols (USA), Inc.Next >