Technical Data314313Hardwarezinc plated steelFrame, plate, basestainless steelShaftstainless steelCouplingStainless SteelMounting Position360°Media Temperature Range (Water)Please Refer to Manufacturer’s Valve SpecificationsWeight7 lb [3.2 kg]For close-off pressure reference Select Pro or Retrofit Technical Documentation.ApplicationThe UFLK/UBLK retrofit kit is designed to easily attach to the valve mounting pad on select competitor butterfly valves utilizing Belimo actuators.This kit will help to restore service without removal of the valve, saving down time. The retrofit kit is available in various configurations for use with both 2-way and 3-way valves utilizing single or dual actuation where applicable.OperationThe UFLK and mounted actuator(s) are capable of rotating 90° in both CW and CCW directions. This allows the disc to fully open or close. When directional needs vary, the actuator’s directional switch can be flipped to change the rotation. The SY/PR is NEMA 4X rated and can be used outdoors.Default/ConfigurationThe actuator is sold separately from the linkage. This allows users to select any actuator with the desired control signal. Since the linkage utilizes standard airside actuators, they can be purchased at any time and mounted in the field.Suitable Actuators Non-SpringElectronic Fail-SafeUFLKP015PRB(X)PKRB(X)Dimensions (Inches [mm])ABC9.7” [247]12.00” [305]7.87” [200]UFLKP015 PR/PKR Retrofit Butterfly Valve LinkageFor Use with PR and PKR Series Actuators800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 03/28/2018 - Subject to change. © Belimo Aircontrols (USA), Inc.Next >