800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN3• Bubble tight shut-off to ANSI Class 300 Standards• Long stem design allows for 2” insulation minimum• Valve Face-to-face dimensions comply with API 609 & MSS-SP-68•Designed to be installed between ASME/ANSI 16.5 Flanges•Completely assembled and tested, ready for installation•Tees comply with ASME/ANSI 16.5 Class 250/300 FlangesApplicationThese valves are designed to meet the needs of HVAC and Commercial applications requiring positive shut-off for liquids at higher pressures andtemperatures. Typical applications include chiller isolation, cooling towerisolation, change-over systems, large air handler coil control, bypass andprocess control applications. The large Cv values provide for an economicalcontrol valve solution for larger fl ow applications.ValveNominal SizeTypeSuitable ActuatorsCv 90°Cv 60°INANSI 150 3-waySpringNon-SpringElectronicFail-Safe100522”F750-300SHP AF SeriesGM SeriesSY SeriesGK Series143752½”F765-300SHP 2231173”F780-300SHP 4352284”F7100-300SHP 6883615”F7125-300SHP 10415466”F7150-300SHP 191110018”F7200-300SHP 3194167310”F6250-300SHP 4428231912”F7300-300SHP 5702298614”F7350-300SHP 8243398816”F7400-300SHP 9712508818”F7450-300SHP 10658577520”F7500-300SHP 16205885524”F7600-300SHP MODON/OFFValveSize10°20°30°40°50°60°70°8090°F750-300SHP21001.406.0013436527195100F765-300SHP2½”1432.108.0019345275102136143F780-300SHP3”2233.201335381117159212223F7100-300SHP44356.202558104157228310414435F7125-300SHP5”68810492165248361491655688F7150-300SHP610411561392503775467449921041F7200-300SHP819112710925459692100113618201911F7250-300SHP103194184276711561673228304319F7300-300SHP”44286325359010631602231931634428F7350-300SHP14”570281326760136820632986407254305702F7400-300SHP16”82431094351015182727553988543878508243F7450-300SHP18”9712135512952331351550869392509712F7500-300SHP20”10658158630147026463990577578751015010658F7600-300SHP24”16205429662254405761188855120751610016205F7 Series 3-Way, ANSI Class 300 Butterfl y ValveReinforced Tefl on Seat, 316 Stainless DiscTechnical DataServicechilled, hot water, 60% glycol, steam to 50 psiFlow characteristicmodified equal percentage, unidirectionalControllable flow range82°Sizes2" to 24"Type of end fittingANSI 300 flangesMaterialsBodyDiscSeatShaftGland sealBushingscarbon steel full lug316 stainless steelRPTF17-4 PH stainlessPTFEglass backed PTFEMedia temperature range-20°F to 400°F [-30°C to 204°C]Body pressure ratingANSI Class 300 Close-off pressure740 psiRangeability100:1 (for 30 deg to 70 deg range)Maximum velocity32 FPSLeakagebubble tight50904 - 02/12 - Subject to change. © Belimo Aircontrols (USA), Inc.Dead End ServiceFollow all described pre-installation and installation procedures. Valves either the upstream orare capable of bubble tight, dead end closure withdownstream flange removed.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN3Maximum Dimensions (Inches)ValveSizeCv 90°ABCD(Max)BHCNo. of HolesLug BoltActuatorClose-Off (PSI)F750-300SHP21005.006.756.7515.505.005/8-11 UNC2*GK285Electronic Fail-SafeF765-300SHP2½”1435.507.387.3816.005.883/4-10 UNC285F780-300SHP3”2236.007.927.9216.256.633/4-10 UNC285F7100-300SHP4”4357.009.139.1318.007.883/4-10 UNC150F750-300SHP21005.006.756.7515.505.005/8-11 UNC2*GM285Non-Spring ReturnF765-300SHP2½”1435.507.387.3816.005.883/4-10 UNC285F780-300SHP32236.007.927.9216.256.633/4-10 UNC28F7100-300SHP4”4357.009.139.1318.007.883/4-10 UNC150F750-300SHP21005.006.756.7522.254.755/8-11 UNCSY2…400SY3…600F765-300SHP½”1435.507.387.3822.755.503/4-10 UNCSY2…400SY3…600F780-300SHP3”2236.007.927.9223.006.003/4-10 UNCSY2…400SY3…600F7100-300SHP4”4357.009.139.1323.757.503/4-10 UNCSY2…285SY3…600F7125-300SHP5”6888.0010.2510.2524.258.503/4-10 UNCSY3…285SY4…60F7150-300SHP610418.5010.7910.7924.759.503/4-10 UNCSY3…285SY4…600F7200-300SHP8”191110.0012.8812.8832.0011.75127/8-9 UNCSY4…400SY5…600SY4…150F7250-300SHP10”319411.5014.7514.7533.0014.25161-8 UNCSY5…285SY7…600SY5…150F7300-300SHP12”442813.0016.6216.6235.0017.00161 1/8-8 UNCSY7…400SY8…600SY7…150F7350-300SHP14”520015.0019.6219.6236.0018.75201 1/8-8 UNCSY8…40SY10…600SY7…150F7400-300SHP16”824316.5021.7521.7537.5021.25201 1/4-8 UNCSY9…285SY10…400SY12…600SY8…150F7450-300SHP18”971218.0023.8823.8842.2522.75241 1/4-8 UNCSY10…285SY11…400F7500-300SHP20”1056819.5025.8125.8149.5025.00241 1/4-8 UNCSY9…150SY12…285F7600-300SHP24”1620522.529.6929.6956.2529.50241 1/2-8 UNCSY12…150F7 Series 3-Way, ANSI Class 300 Butterfl y ValveReinforced Tefl on Seat, 316 Stainless DiscDCABDimensionsD104Dimensions “A, B and C” do not include flange gaskets. (3 required per valve)Application Notes1. Valves are rated at 725 psi differential pressure in the closed position@ 100F media temperature.2. Valves are furnished with lugs tapped for use between ANSI Class 250/300 flanges conforming to ANSI B16.5 Standards.3. 3-way assemblies are furnished assembled with Tee, calibrated and tested, ready for installation. All 3 way assemblies require the customer to specifythe 3-way configuration code prior to order entry to guarantee correct place-ment of valves and actuator(s) on the assembly.4. Dimension “D” allows for actuator(s) removal without the need to removethe valve from the pipe.5. Weather shields are available, dimensional data furnished upon request.6. Dual actuated valves have single actuators mounted on each valve shaft.7. Flange gaskets (3 required, not provided with valve) MUST be used betweenvalve and ANSI flange.8. Flange bolts are not included with the valve. These are furnished by others.Note:For tee configuration, please refer to page 5.50904 - 02/12 - Subject to change. © Belimo Aircontrols (USA), Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEAN45Application:The SY actuators are NEMA 4X rated and designed to meet the needs of HVAC and Commercial applications. Offered on Belimo standard and high performance valve series, theseactuators are available for on/off and modulating applications.Depending on the application, they are available in 24 VAC/VDC, 120 VAC and 230 VAC.Power Supply230 VAC 50/60Hz, single phaseModelTorque Speed 60HzSpeed 50HzPower ConsumptionDuty CycleOverrideWeightOn/OffMFTSY1-220(P)35Nm/310 in-lbs1213s0.3A30%75%8mm Wrench2.0kg/4.9 lb.SY2-230(MFT)90Nm/801 in-lbs1517s0.5A30%75%Hand Wheel11kg/24.5 lb.SY3-230(MFT)150Nm/1335 in-lbs22s26s0.5A30%75%Hand Wheel11kg/24.5 lb.SY4-230(MFT)400Nm/3560 in-lbs16s18s0.6A30%75%Hand Wheel22kg/48.5 lb.SY5-230(MFT)500Nm/4450 in-lbs22s250.7A30%75%Hand Wheel22kg/48.5 lb.SY6-230(MFT)650Nm/5785 in-lbs2831s0.8A30%75%Hand Wheel22kg/48.5 lb.SY7-230(MFT)1000Nm/8900 in-lbs46s55s1.6A30%75%Hand Wheel36kg/79.5 lb.SY8-230(MFT)1500Nm/13350 in-lbs46s552.0A30%75%Hand Wheel36kg/79.5 lb.SY9-230(MFT)2000Nm/17800 in-lbs5870s1.6A30%50%Hand Wheel56kg/123.5 lb.SY10-230(MFT)2500Nm/22250 in-lbs58s70s2.0A30%50%Hand Wheel56kg/123.5 lb.SY11-230(MFT)3000Nm/26700 in-lbs58s70s1.6A30%50%Hand Wheel56kg/123.5 lb.SY12-230(MFT)3500Nm/31150 in-lbs58s70s2.2A30%50%Hand Wheel56kg/123.5 lb.Technical DataElectrical connection½” conduit connector, screw terminalsOverload protectionthermally protected 135°C cut-outMotor protectionH Class insulation (SY-1), F Class (SY-2…12)Gear trainhigh alloy steel gear sets,self lockingOperating range(SY…-220) on/off, floating point(SY...230MFT) 2-10 VDC, 4-20 mA, 0-10 VDCSensitivity(SY…230MFT) 0.4 mA/200mVReversal hysteresis(SY…230MFT) 1.0 mA/500mVFeedback(SY…230MFT) 2-10 VDCAngle of rotation90°Direction of rotationreversiblePosition indicationtop mounted domed indicatorInternal humidity controlresistive heating elementAuxiliary switchesfactory set for 5° and 85° change of stateSY1: (2) SPDT, min 1 mA, 24 VAC; max 3A, 250 VAC.SY2-12: (2) SPDT, min 1 mA, 24 VAC; max 5A, 250 VAC.Ambient temperature-22°F to +150°F [-30°C to +65°C]Humidity rangeup to 95%Housing typeIP67, NEMA 4XHousing materialdie cast aluminum a lloyAgency listingsISO, CE, cCSAusSY...230V Series Non-Spring Return Actuator Technical Data - 230 VAC50904 - 02/12 - Subject to change. © Belimo Aircontrols (USA), Inc.800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA39SY… Series Non-Spring ActuatorDimensionsDABCAAABBBCCCDDSY-1...SY-9~12...SY-7~8...SY-2~6...MODELDIM A (MAX)Add to Dim A for cover removal DIM BDIM C (MAX)DIM DInches [mm]Inches [mm]Inches [mm]Inches [mm]Inches [mm]SY16.10 [155]3.94 [100]4.25 [108]8mm-SY2~310.04 [255]7.48 [190]7.87 [200]12.99 [330]7.87 [200]SY4~612.40 [315]8.86 [225]9.21 [234]14.96 [380]11.81 [300]SY7~816.54 [420]8.86 [225]9.21 [234]17.72 [450]13.39 [340]SY9~1223.23 [590]8.86 [225]10.24 [260]18.50 [470]13.78 [350]Note: ~ indicates range of actuator i.e., SY2~3 = SY-2 and SY-3M40048 - 06/10 - Subject to change. © Belimo Aircontrols (USA), Inc.Next >