Technical Data1489Power Supply24 VAC, ±20%, 50/60 Hz, 24 VDC, ±10%Power Consumption Running4 WPower Consumption Holding1.25 WTransformer Sizing6 VA (class 2 power source)Shaft Diameter1/2” to 1.05” round, centers on 1/2” and 3/4” with insert, 1.05” without insertElectrical Connection18 GA plenum rated cable with 1/2” conduit connector protected NEMA 2 (IP54) 3ft [1m] 10ft [3m] and 16ft [5m]Overload Protectionelectronic throughout 0° to 95° rotationOperating Range Y2 to 10 VDC, 4 to 20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor), variable (VDC, PWM, floating point, on/off)Input Impedance100 k Ω for 2 to 10 VDC (0.1 mA), 500 Ω for 4 to 20 mA, 1500 Ω for PWM, floating point and On/OffFeedback Output U2 to 10 VDC, 0.5 mA max, VDC variableAngle of RotationMax. 95°, adjustable with mechanical stopTorque motorMin. 180 in-lbs [20 Nm]Direction of Rotation (Motor)reversible with built-in switchPosition Indicationreflective visual indicator (snap on)Manual Overrideexternal push buttonRunning Time (Motor)35 secAmbient Humidity5 to 95% RH non condensing (EN 60730-1)Ambient Temperature Range-22°F to 122°F [-30°C to 50°C]Storage Temperature Range-40°F to 176°F [-40°C to 80°C]HousingNEMA 2, IP54, UL Enclosure Type 2Housing MaterialUL94-5VAAgency Listings†cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/ECNoise Level (Motor)<45 dB (A) Servicingmaintenance freeQuality StandardISO 9001Weight2.6 lb [1.2 kg]Torque min. 180 in-lb, for control of damper surfaces up to 45 sq. ft.ApplicationFor proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. The actuator is mounted directly to a damper shaft up to 1.05” in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. The default parameters for 2 to 10 VDC applications of the …MFT actuator are assigned during manufacturing. If necessary, custom versions of the actuators can be ordered. The parameters can be changed by two means: pre-set and custom configurations from Belimo or on-site configurations using the Belimo PC-Tool software.OperationThe actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement.The AMX series provides 95° of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover.The AMCX24-MFT actuators use a brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode.Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions.Dimensions (Inches[mm])1.18" [30]4.3" [109]4.06" [103]5.2" [131]8.3" [211]3.46" [88]2.49" [63.4]2" [50.8]1/2” to 1.05” [12.7 to 26.67]2/5” to 1.05” [10 to 26.67]AMCX24-MFTModulating, Non-Spring Return, 24 V, Multi-Function Technology®800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 11/29/2017 - Subject to change. © Belimo Aircontrols (USA), Inc.Typical SpecificationModulating control damper actuators shall be electronic direct coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft up to 1.05” diameter. Actuators must provide modulating damper control in response to a 2 to 10 VDC or, with the addition of a 500 Ω resistor, a 4 to 20 mA control input from an electronic controller or positioner. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have reversing switch and manual override on the cover. Run time shall be constant and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.Wiring DiagramsAActuators with appliance cables are numbered.Provide overload protection and disconnect as required.Actuators may also be powered by 24 VDC.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4 to 20 mA control signal to 2 to 10 VDC.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 VAC line.For triac sink the Common connection from the actuator must be connected to the Hot connection of the controller. Position feedback cannot be used with a triac sink controller; the actuator internal common reference is not compatible.Actuators may be connected in parallel if not mechanically linked. Power consumption and input impedance must be observed.IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number 40155). Blk (1)Red (2)Pnk (4)Wht (3)Org (5)LineVoltsPositionFeedback VDC(+)(–)1311CommonHot +Y2 Input Y1 InputU Output 24 VAC TransformerOn/Off LineVolts(–)(+)Position Feedback VDC11110Blk (1)Red (2)Pnk (4)Wht (3)Org (5)CommonHot +Y2 Input Y1 InputU Output 24 VAC Transformer (AC Only)Floating Point (–)(+)LineVoltsΩ500 Ω1/4 wattControl Signal VDC / mA135117Blk (1)Red (2)Pnk (4)Wht (3)Org (5)CommonHot +Y2 Input Y1 InputU Output 24 VAC TransformerVDC/mA Control LineVolts (–) (+) PositionFeedback VDC1118Blk (1)Red (2)Pnk (4)Wht (3)Org (5)CommonHot +Y2 Input Y1 InputU Output 24 VAC Transformer (AC Only)PWM ControlAMCX24-MFTModulating, Non-Spring Return, 24 V, Multi-Function Technology®800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 11/29/2017 - Subject to change. © Belimo Aircontrols (USA), Inc. Functions0%50%100%Control mode acc. to Y1MinMidMaxNormalabcOrg (5) 24 VAC Transformer (AC Only) U OutputA15Blk (1) CommonRed (2) + Hot Pnk (4) Wht (3) (–)(+)LineVoltsBCAVDC / mAControl Signal Y2 Input Y1 Input127 Override ControlAMCX24-MFTModulating, Non-Spring Return, 24 V, Multi-Function Technology®800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA / CARIBBEANDate created, 11/29/2017 - Subject to change. © Belimo Aircontrols (USA), Inc.Next >