Sensor Datasheet01HT-5..www.belimo.com01HT-5.. • en-us • 2018-01-08 • Subject to change1 / 3Contact Temperature SensorSurface contact mounted pipe temperature sensor. Nema 4X / IP65 rated enclosure. Spring loaded brass contact sensor to ensure fast response and accurate reading. [Pipe clamp is not included. See accessories.]Type OverviewTypeOutput Signal Passive Temperature01HT-5APT10001HT-5BPT100001HT-5ENi1000 (JCI)01HT-5LNTC10k201HT-5MNTC10k301HT-5QNTC20kTechnical DataElectrical DataElectrical Connectionremovable spring loaded terminal block max. 11 GA [2.5 mm²]Cable Entrycable gland PG11 Ø6 to 10 mm, with strain relief Ø6 to 8 mm, 1/2" conduit adapter includedFunctional DataOutput Signal Passive TemperaturePT100PT1000Ni1000 (JCI)NTC10k2NTC10k3NTC20kMediawaterMeasuring DataMeasured ValuestemperatureAccuracy temperature passivepassive sensors depending on used typePT.. = ±0.5°F @ 32°F [±0.3°C @ 0°C]Ni.. = ±0.7°F @ 32°F [±0.4°C @ 0°C]NTC.. = ±0.3°F @ 77°F [±0.2°C @ 25°C]MaterialsCable GlandPA6, blackHousingcover: lexan, Belimo orange NCS S0580-Y6ORbase: lexan, Belimo orange NCS S0580-Y6ORseal: 0467 NBR70, blackSensor Datasheet01HT-5..www.belimo.com01HT-5.. • en-us • 2018-01-08 • Subject to change2 / 3Safety DataAmbient Humidity85% RH non-condensingAmbient Temperature-30°F to 120°F [-35°C to 50°C]Medium Temperature-30°F to 195°F [-35°C to 90°C]Housing Surface Temperature (Tsurf)max. 195°F [90°C]Protection Class IEC/ENIII safety extra-low voltage (selv)Protection Class ULUL Class 2 SupplyEU ConformityCE MarkingCertification IEC/ENIEC/EN 60730-1 and IEC/EN 60730-2-9Certification ULcULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1:02/-2-9, CE acc. to 2004/108/EC and 2006/95/EC, NEMA 4X, IP65Degree of Protection IEC/ENIP65Degree of Protection NEMA/ ULNEMA 4XQuality StandardISO 9001Weight0.095 lbsSafety NotesThe installation and assembly of electrical equipment should only be performed by authorized personnel.The product should only be used for the intended application. Unauthorized modifications are prohibited! The product must not be used in relation with any equipment that in case of a failure may threaten, directly or indirectly, human health or life or result in danger to human beings, animals or assets. Ensure all power is disconnected before installing. Do not connect to live/operating equipment.Please comply with • Local laws, health & safety regulations, technical standards and regulations • Condition of the device at the time of installation, to ensure safe installation • This data sheet and installation manualAccessoriescable gland nut conduit 1/2" NPTOptional AccessoriesDescriptionTypetightening strap for pipe diameter up to 4.3" [110 mm] with thermal contact fluidA-22P-A40tightening strap for pipe diameter up to 35" [900 mm] with thermal contact fluidA-22P-A42Wiring DiagramScope of DeliverySensor Datasheet01HT-5..www.belimo.com01HT-5.. • en-us • 2018-01-08 • Subject to change3 / 3DimensionsNext >