A44Temperature SensorsBuilding Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: sales@bapihvac.com • Web: www.bapihvac.comFeatures & OptionsThese units are designed to monitor water temperature in retrofit or filled pipe applications. The strap units fit around the outside of a pipe, while the remote probes are strapped directly onto the pipe. All three units measure the water temperature by sensing the surface temperature of the pipe. Strap Units and Remote Probes come standard with a Junction Box enclosure but are also available with a new BAPI-Box Crossover enclosure.Clamp-On Strap – This unit has a bendable copper sensing plate which forms to the curvature of the pipe. An adjustable hose clamp holds the unit in place around the pipes from 2 to 4.5” (5 to 11.4 cm) in diameter.Spring-Loaded Strap – Instead of removing the pipe insulation, the spring loaded sensing pad is held against the pipe through a hole cut in the insulation. It can be used with 5 to 14.5” (13 to 37 cm) dia. pipes with up to 2” of insulation. Remote Probes - These units have a 1.75” long stainless steel probe with either Plenum-Rated Cable or FEP-Jacketed Cable with a lead length of 18” (Other lengths are available by calling BAPI). Remote Probes are ideal for strap-on applications on any size pipe, or hard-to-access areas. (See pg A48 for more Remote Probe Options.)Strap Units and Remote Probe UnitsSpecificationsEnclosure Material: Junction Box: Galvanized SteelBAPI-Box Crossover:UV-resistant polycarb., UL94, V-0Environmental Operation Range:Temperature Sensor:Clamp On: -40 to 85 oC, Spring Loaded: -40 to 85 oCRemote Probe: -40 to 105 ºCTemperature Transmitter: -20 to 70 oCHumidity: 0 to 95%, non-condensingl Clamp-On, Spring-Loaded or Remote Probesl Junction Box or BAPI-Box Crossover EnclosureEnclosure Rating:Junction Box: IP20, NEMA 1BAPI-Box Crossover (BBX): IP10, NEMA 1BAPI-Box Crossover (BBX6): IP66, NEMA 4XSensing Element: Thermistor or RTD (See Sensors Section for Specs.)Encl. Dimensions: H x W x D BAPI-Box Crossover:..3.1 x 2.2 x 1.9” (79 x 56 x 49mm) Junction Box: ..............4.2 x 3.9 x 1.94” (106 x 98.4 x 49mm)(For encl. dimension drawings, turn to the end of the section.)Spring Loaded StrapsRemote ProbeRev. 04/26/17Clamp-On UnitsThe new BAPI-Box Crossover features a hinged cover with thumb latch for easy termination. It is available with a pierceable knockout plug for the open port and a watertight gasket for the cover.(Shown with optional plug and gasketed cover.)BAPI-Box CrossoverA45Temperature SensorsBuilding Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: sales@bapihvac.com • Web: www.bapihvac.comStrap Units and Remote Probe UnitsBA/ ( #1 ) - ( #2 ) - ( #3 ) - ( #4 )#1: Temperature Sensor (required)1.8K .........................1.8K Thermistor3K ............................3K Thermistor10K-2 .......................10K-2 Thermistor10K-3 .......................10K-3 Thermistor10K-3[11K] ...............10K-3[11K] Thermistor20K ..........................20K Thermistor1K[375] ....................1K Platinum RTD (375 curve)1K[NI].......................1K Ω Nickel RTD1K ............................1K Platinum RTD (385 curve)Transmitters below require a BAPI-Box Crossover EnclosureT1K[32 TO 212F] .....1K Plat. RTD Transmitter, 4 to 20 mA Output, 32 to 212°F RangeT1K[20 TO 120F] .....1K Plat. RTD Transmitter, 4 to 20 mA Output, 20 to 120°F RangeT1K[0 TO 100F] .......1K Plat. RTD Transmitter, 4 to 20 mA Output, 0 to 100°F RangeT1K[0 TO 100C] ......1K Plat. RTD Transmitter, 4 to 20 mA Output, 0 to 100°C RangeT1K[-7 TO 49C] .......1K Plat. RTD Transmitter, 4 to 20 mA Output, -7 to 49°C RangeT1K[-18 TO 38C] .....1K Plat. RTD Transmitter, 4 to 20 mA Output, -18 to 38°C RangeMatched Transmitters are also available. Contact your BAPI representative for ordering.#2: Strap Config & Enclosure (optional)S ...............................Clamp-On Strap - fits 2 to 4.5” (5 to 11.4 cm) diameter pipes STP ...........................Spring Loaded Strap - fits 5 to 14.5” (13 to 37 cm) diameter pipesRPP ..........................Remote Probe with 18” of Plenum Rate CableRPPFEP-18” .............Remote Probe with 18” of FEP-Jacketed CableRPPFEP2-18” ...........Remote Probe w/ 18” of FEP-Jacketed Cable (suitable for submersion)#3: Enclosure and Lead Length (optional, comes standard with Junction Box)BBX ..........................BAPI-Box Crossover (IP10, NEMA 1)BBX6 ........................BAPI-Box Crossover with Gasket and Knockout Plug (IP66, NEMA 4X)#4: Test & Balance or Terminal Strip (optional, requires a BAPI-Box Crossover Enclosure)TB .............................Test & Balance SwitchTS .............................Terminal Strip ConnectionStrap Sensor Option Selection GuideAdditional options are available for these units but not shown in this Selection Guide. Contact your BAPI representative for the complete list of options. Use the Option Selection Guide below to create your custom part number. Replace the number and parenthesis with the designator for each selection. Skip the designator and dashes for optional selections that are not required in your configuration.Example Number: BA/ ( 10K-2 ) - ( S ) - ( BBX ) - ( ) Actual Number (with parenthesis removed): BA/10K-2-S-BBXDescription: 10K-2 Thermistor, Clamp-On Strap, BAPI-Box Crossover Enclosure, No Terminal Strip.Your Number: BA/ Next >