PRODUCT SPECIFICATIONSTubing Connection | Tubing Size:Probe Insertion Length & Sensing Points:Tube Mounting Direction:Impact Tube Mounting Angle:Mounting Flange (Diameter):Measurement Probe Hole Size (Diameter):Mounting Holes (Diameter):Material:Storage & Operating Temperature Range:Operating Humidity Range:Weight:Agency Approvals:45º Barbed Type (6 Places), accepts 1/8” through 1/4” ID exible plastic tubingVPT: 4” (101.6 mm) | Single Point VPT-8”: 8” (203.2 mm) | Single PointTip opens directly into the air stream (Mounting arrow on Probe)Parallel to air stream (+/- 7 Degrees)1.50” (38.1 mm)1/4" (6.35 mm) 3/16” (4.76 mm) Aluminum-40 to 185ºF (-40ºC to 85ºC)0 to 90% RH (non-condensing) VPT: 0.022 lbs (10g) | VPT-8”: 0.034 lbs (15.4g)RoHS2, WEEE, ReachAutomation Components, Inc.PRESSURE | PITOT TUBES | VPT PRESSURE | ## Call: 1-888-967-5224 | Web: www.workaci.com VPT Velocity Pitot Tubes (Aluminum)The VPT Series is an Aluminum Velocity Pressure or ow (Impact) probe used to sample the air ow in HVAC duct or equipment applications. The VPT should be mounted approximately 5 to 8 duct diameters downstream from elbows, obstructions, or large change in duct area to reduce the amount of turbulence that will aect your readings.Applications: Used to monitor fan operation and true air ow with varying amounts of static pressure in non-critical applications.The VPT Series is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.VPTVPT-8”DIMENSIONAL DRAWINGFront ViewRight ViewTop ViewSTANDARD ORDERINGSensing Points1 1Model #VPTVPT-8”Item #103010125008Automation Components, Inc.PRESSURE | PITOT TUBES | VPTPRESSURE | ## Call: 1-888-967-5224 | Web: www.workaci.com Insertion Length4” (101.6 mm)8” (203.2 mm)Ø1.50” (38.10mm)Ø.19”(4.76mm).50” (12.70mm)1.31”(33.27mm)Ø.20”(5.08mm)Ø.27”(6.86mm)0.06” (1.52mm)4.00”(101.60mm)or8.00”(203.20mm)Ø.25”(6.35mm)-OR-Model # Example:103010VPTNext >