Sensor Type | Sensor Curve:Number Sensing Points:Number Wires:Sensor Series Output @ 25ºC (77ºF) |(Lead Wire Colors):Accuracy 0-70ºC (32-158ºF):Stability:Response Time (63% Step Change):Power Dissipation Constant:Enclosure Speci cations, OperatingTemperature Range, Ratings:Storage Temperature Range:Operating Humidity Range:Pipe Mount Sensor Enclosure Material:Acceptable Pipe Size:Foam Material | Flammability Rating:Lead Length | Conductor Size:Lead Wire Insulation | Wire Rating:Conductor Material:Product Dimensions:Product Weight:Agency Approvals:Thermistor | Non-Linear, NTC (Negative Temperature Coe cient)OneTwo (Non-Polarity Sensitive)A/1.8K: 1.8K nominal | (Red/Yellow) A/CSI: 10K nominal | (Green/Yellow)A/3K: 3K nominal | (White/Brown) A/10KS: 10K nominal | (White/Blue)A/AN (Type III): 10K nominal | (White/White) A/10K-E1: 10K nominal | (Gray/Orange)A/AN-BC: 5.238K nominal | (White/Yellow) A/20K: 20K nominal | (Brown/Blue)A/CP (Type II): 10K nominal | (White/Green) A/100KS: 100K nominal | (Black/Yellow)+/-0.2ºC (+/-0.36ºF) except A/10K-E1 Series: +/-0.3ºC (+/-0.54ºF);A/1.8K Series: +/- 0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)Sensor Dependent; Contact ACI for more information on speci c sensor30 Seconds nominal3 mW/ºC except A/1.8K Series: 1 mW/ºC | A/10K-E1 Series: 2 mW/ºCA/XX-S-GD: Galvanized Steel, -40 to 93ºC (-40 to 200ºF), NEMA 1 (IP 10) A/XX-S-PB: ABS Plastic, -30 to 85ºC (-22 to 185ºF), UL94-HB, Plenum RatedA/XX-S-4X: Polystyrene Plastic, -40 to 70ºC (-40 to 158ºF), UL94-V2, NEMA 4X (IP 66)-40 to 80ºC (-40 to 176ºF)10 to 95% RH, non-condensing14” (35.6cm) | 22 AWG (0.65mm)A/X-S-XX: 1 1/4” (32mm) to 4” (100mm); A/X-S10-XX: 2” (50mm) to 10” (250mm)Neoprene/EPDM/SBR Polymer | UL94-HF1; MIL-R-6130C; FMVSS-302A/XX-S-XX: 1 1/4” (32mm) to 4” (100mm) | A/XX-S10-XX: 2” (50mm) to 10” (250mm)Etched Te on (PTFE) Colored Leads | MIL-W-16878/4 (Type E)Silver Plated CopperSee Drawing on Back of Data SheetA/XX-S-GD: 0.80 lbs. (0.37kg) | A/XX-S-PB: 0.40 lbs. (0.18kg) | A/XX-S-4X: 0.55 lbs. (0.25kg)CE, RoHS2, WEEEAutomation Components, Inc.TEMPERATURE | THERMISTORS | STRAP ONPRODUCT SPECIFICATIONSTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com PBGD4XSTRAP ONNon-Intrusive Pipe Mount, ThermistorThe ACI Thermistor Strap-On Series features a 1.5” square copper plate with the sensor encapsulated to the back side of the plate to improve the thermal conductivity between the pipe and the sensor when an Immersion style sensor can’t be inserted into the pipe. Each sensor has two, 14 inch 22 AWG Etched Te on colored lead wires to dierentiate the dierent sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the eects of moisture upon the sensors as well as to improve the thermal response times using our high quality, thermally conductive epoxy. The Strap-On Series sensors can be used to monitor pipe sizes from 1 ¼” to 10” in diameter. For best accuracy and increased thermal conduction between the pipe and the sensor, ACI recommends to clean the pipe before applying thermal grease as well as to insulate the sensor from the eects of the ambient air. Optional weather proof enclosure and NIST certi cates are available upon request.Applications: Cold Water Systems, Hot Water Systems, Retro t, Hydronic Heating Systems, ChillersThe ACI Thermistor Strap-On Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Automation Components, Inc.TEMPERATURE | THERMISTORS | STRAP ONTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com 1.8K | 3K | AN | AN-BC | CP | CSI | 10KS | 10K-E1 | 20K | 100KSA/S = Strap-On (1.25” to 4” Pipe Size) | S10* = Strap-On (2” to 10” pipe size)GD = Galvanized | PB = Plastic | 4X = NEMA 4X Weather ProofCUSTOM ORDERINGA. Sensor Series No Selection RequiredB. Model Series Select One (1)C. Con guration Select One (1)D. Enclosure Select One (1)---- = No NIST Certi cate | NIST = NIST Certi cate (Must Specify 1, 3 or 5 Points)E. NIST Select One (1)MODEL #A/Model # Example:A/A.1.8KB.SC.PBD.NISTE.Front ViewRight ViewTop ViewDIMENSIONAL DRAWING4.20” (106.68mm)2.33” (59.06mm)1.65” (41.86mm)Adjustable 2”- 5”2.55” (64.77mm)3.70”(93.98mm)2.23” (56.71mm)2.25”(57.15mm)4.79” (121.55mm)3.60”(91.44mm)Foam Pad Will Compress Upon InstallationFoam Pad Will Compress Upon InstallationFoam Pad Will Compress Upon Installation2.73” (69.33mm)4.79” (121.55mm)Adjustable 2”- 5”Adjustable 2”- 5”Plastic Box Enclosure [PB]Galvanized Enclosure [GD]NEMA 4X Enclosure [4X]Note*: Not available in “NEMA 4X” style enclosure optionACCESSORIES ORDERINGModel #A/HOSE CLAMP-2-5"A/HOSE CLAMP-2-12"NSG HEAT TRANSFER PASTE 2OZNSG HEAT TRANSFER PASTE 16OZItem #142630142631102595140574DescriptionHardware, 2-5” Hose Clamp, Quick Release Worm Gear, 201/301 Stainless SteelHardware, 2-12” Hose Clamp, Quick Release Worm Gear, 201/301 Stainless SteelThermal Grease, 2 oz. Tube, Silicone Free, -40 to 320ºF (-40 to 160ºC)Thermal Grease, 16 oz. Jar, Silicone Free, -40 to 390ºF (-40 to 198ºC)-OR-142631A/HOSE CLAMP-2-12”Model # Example:Next >