Sensor Type | Sensor Curve:Number Sensing Points:Number Wires:Sensor Output @ 25ºC (77ºF) | (Lead Wire Colors):Sensor Accuracy 0-70ºC (32-158ºF):Power Dissipation Constant:Stability:Response Time (63% Step Change):Pipe Mount Sensor Enclosure Material:Pipe Sizes Acceptable:Operating Temperature Range:Storage Temperature Range:Operating Humidity Range:Lead Length | Conductor Size:Lead Wire Insulation | Wire Rating:Conductor Material:Product Dimensions (Length x Diameter):Product Weight:Agency Approvals:Thermistor | Non-Linear, NTC (Negative Temperature Coe cient)OneTwo (Non-Polarity Sensitive)A/1.8K: 1.8K nominal | (Red/Yellow)A/3K: 3K nominal | (White/Brown)A/AN (Type III): 10K nominal | (White/White)A/AN-BC: 5.238K nominal | (White/Yellow)A/CP (Type II): 10K nominal | (White/Green)+/-0.2ºC (+/-0.36ºF) except A/10K-E1 Series: +/-0.3ºC (+/-0.54ºF);A/1.8K Series: +/- 0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)3 mW/ºC except A/1.8K Series: 1 mW/ºC | A/10K-E1 Series: 2 mW/ºCSensor Dependent; Contact ACI for more information on the sensor in question.20 Seconds nominalBrass½” (12.7mm) to 1” (25.4mm)-40 to 150ºC (-40 to 302ºF)-40 to 85ºC (-40 to 185ºF)10 to 95% RH, Condensing24” (61cm) | 22 AWG (0.65mm)Etched Te on (PTFE) Colored Leads | MIL-W-16878/4 (Type E)Silver Plated Copper1.10” (27.9mm) x 0.375” (9.53mm)0.05 lbs. (22.68g)CE, RoHS2, WEEEAutomation Components, Inc.TEMPERATURE | THERMISTORS | PIPE MOUNT PRODUCT SPECIFICATIONSTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com A/CSI: 10K nominal | (Green/Yellow)A/10KS: 10K nominal | (White/Blue)A/10K-E1: 10K nominal | (Gray/Orange)A/20K: 20K nominal | (Brown/Blue)A/100KS: 100K nominal | (Black/Yellow)PIPE MOUNTSmall Pipe/Coil Sensor, ThermistorThe ACI Thermistor Pipe Mount Series features a 1.1” long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor. Each sensor has two, 24 inch 22 AWG Etched Te on colored lead wires to di erentiate the many di erent sensor types. All sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the e ects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used to monitor pipe or coil sizes from 1/2” to 1” in diameter. A 7.5” nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and sensor, ACI recommends to clean the pipe and to apply thermal grease between the sensor and pipe before securely fastening to the pipe and insulating the sensor from any e ects of the ambient air. An optional Plenum rated cable, Zip wire or NIST Certicate are available as referenced in the ordering grid on the back of the Product Data Sheet. Applications: Cooling Coils, Heating Coils, Hot Water Systems, Chilled Water Systems, Hydronic Heating Systems, ChillersThe ACI Thermistor Pipe Mount Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Revision C0000002 | Rev 1.0Automation Components, Inc.TEMPERATURE | THERMISTORS | PIPE MOUNTTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com STANDARD ORDERINGModel #A/1.8K-PMA/3K-PMA/AN-PMA/AN-BC-PMA/CP-PMA/CSI-PMA/10KS-PMA/10K-E1-PMA/20K-PMA/100KS-PMItem #138644138659138628138996138629138662142395138655138631138654Description1.8K Pipe Mount, 24” Leads 3K Pipe Mount, 24” LeadsAN (Type III) Pipe Mount, 24” LeadsAN-BC Pipe Mount, 24” Leads, 11K ShuntCP (Type II) Pipe Mount, 24” LeadsCSI Pipe Mount, 24” Leads10KS Pipe Mount, 24” Leads10K-E1 Pipe Mount, 24” Leads20K Pipe Mount, 24” Leads100KS Pipe Mount, 24” Leads-OR-Model # Example:138628A/AN-PM1.8K | 3K | AN | AN-BC | CP | CSI | 10KS | 10K-E1 | 20K | 100KSA/PM = 1.1” Brass Pipe Mount Sensor---- = Standard (24” Etched Te on) | 10’ = 10 Feet (3.05m) | 20’ = 20 Feet* (6.10m)OPTIONAL SENSOR ORDERINGA. Sensor Series No Selection RequiredB. Model Series Select One (1)C. Con guration No Selection RequiredD. Lead Length Select One (1)CL2P = Plenum Rated Cable | Z = 2 Conductor White Zip WireE. Lead Wire Type Select One (1)---- = No NIST Certicate | NIST = NIST Certicate (Must Specify 1, 3 or 5 Points)F. NIST Select One (1)MODEL #A/PMModel # Example:1.8KB.A/A.PMC.20’D.ZE.NISTF.Note*: The 20’ Length is not CE Compliant but it is RoHS CompliantDIMENSIONAL DRAWINGStandard ViewØ.38” (9.53mm)1.10” (27.94mm).31” Strip Length(7.87mm)23.00” (584.20mm)ACCESSORIES ORDERINGModel #HARDWARE, 2” HOSE CLAMPNSG HEAT TRANSFER PASTE 2OZNSG HEAT TRANSFER PASTE 16OZItem #100235102595140574DescriptionHardware, 2” Hose Clamp, Quick Release Worm Gear, 201/301 Stainless SteelThermal Grease, 2 oz. Tube, Silicone Free, -40 to 320ºF (-40 to 160ºC)Thermal Grease, 16 oz. Jar, Silicone Free, -40 to 390ºF (-40 to 198ºC)-OR-Model # Example:100235HARDWARE, 2” HOSE CLAMPNext >