Sensor Type | Sensor Curve:Number Sensing Points | Number Wires:Sensor Output @ 25°C (77°F) |(Lead Wire Colors):Accuracy 0-70°C (32-158°F):Stability:Response Time (63% Step Change):Power Dissipation Constant:Button Sensor Enclosure Material:Plastic Button Flammability Rating:Operating | Storage Temperature Range:Operating Humidity Range:Lead Length | Conductor Size:Lead Wire Insulation | Wire Rating:Conductor Material:Product Dimensions (Length x Diameter):Product Weight:Agency Approvals:Thermistor | Non-Linear, NTC (Negative Temperature Coe cient)One | Two (Non-Polarity Sensitive)A/1.8K: 1.8K nominal | (Red/Yellow)A/3K: 3K nominal | (White/Brown)A/AN (Type III): 10K nominal | (White/White)A/AN-BC: 5.238K nominal | (White/Yellow)A/CP (Type II): 10K nominal | (White/Green)+/-0.2°C (+/-0.36°F) except A/10K-E1 Series: +/-0.3°C (+/-0.54°F)A/1.8K Series: +/-0.5°C @ 25°C (77°F) and (+/-1.0°C) (+/-1.8°F) Sensor Dependent; Contact ACI for more information on speci c sensor10 Seconds nominal3 mW/°C except A/1.8K Series: 1 mW/°C | A/10K-E1 Series: 2 mW/°CA/XX-BBS Series: Brass | A/XX-SBS Series: 304 Stainless Steel | A/XX-PBS Series: ABSUL94-HBA/XX-PBS Series: -40 to 70°C (-40 to 158°F) | -40 to 85°C (-40 to 185°F)A/XX-BBS & A/XX-SBS Series: -40 to 150°C (-40 to 302°F) | -40 to 85°C (-40 to 185°F)10 to 95% RH, non-condensing24” (61cm) | 22 AWG (0.65mm)Etched Te on (PTFE) Colored Leads | Mil Spec 16878/4 Type E)Silver Plated CopperA/XX-PBS Series: 1.00” (25.4mm) x 0.750” (19mm)A/XX-BBS and A/XX-SBS Series: 1.20” (30.48mm) x 0.700” (17.78mm)A/XX-PBS Series: 0.04 lbs. (18.15g) | A/XX-BBS & A/XX-SBS Series: 0.10 lbs. (45.36g)CE, RoHS2, WEEE Automation Components, Inc.TEMPERATURE | THERMISTORS | FLUSH MOUNT BUTTONSPRODUCT SPECIFICATIONSTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com A/CSI: 10K nominal | (Green/Yellow)A/10KS: 10K nominal | (White/Blue)A/10K-E1: 10K nominal | (Gray/Orange)A/20K: 20K nominal | (Brown/Blue)A/100KS: 100K nominal | (Black/Yellow)PBSSBSBBSFLUSH MOUNT BUTTONSBrass, Stainless Steel & Plastic ThermistorsThe ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with two, 24 inch 22 AWG Etched Te on colored lead wires to dierentiate the dierent sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation process to eliminate the eects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low pro le design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a ½” piece of conduit coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as little paint as possible to not aect the accuracy or responsiveness of the sensor. Applications: Museums, Historical Buildings, Monitoring Space Temperatures, O ce Buildings, Schools, Retail, Remote Sensor The Thermistor Flush Mount Button Sensor Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Automation Components, Inc.TEMPERATURE | THERMISTORS | FLUSH MOUNT BUTTONSTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com STANDARD ORDERINGModel #A/1.8K-PBSA/1.8K-SBSA/3K-PBSA/3K-SBSA/AN-PBSA/AN-SBSA/AN-BC-SBSA/CP-PBSA/CP-SBSA/CSI-PBSA/CSI-SBSA/10KS-SBSA/10K-E1-PBSA/10K-E1-SBSA/20K-PBSA/20K-SBSA/100KS-PBSA/100KS-SBSItem #132241124140129302121089124534121738121334122113122262122359122418120232130259126483120664120702135773125730Description1.8K Plastic Button Sensor, 24” Leads, Anchor1.8K Stainless Steel Button Sensor, 24” Leads, Spacers & Brass Nut3K Plastic Button Sensor, 24” Leads, Anchor3K Stainless Steel Button Sensor, 24” Leads, Spacers & Brass NutAN Plastic Button Sensor, 24” Leads, AnchorAN Stainless Steel Button Sensor, 24” Leads, Spacers & Brass NutAN-BC Stainless Steel Button Sensor, 24” Leads, 11K Shunt, Spacers & Brass NutCP Plastic Button Sensor, 24” Leads, AnchorCP Stainless Steel Button Sensor, 24” Leads, Spacers & Brass NutCSI Plastic Button Sensor, 24” Leads, AnchorCSI Stainless Steel Button Sensor, 24” Leads, Spacers & Brass Nut10KS Stainless Steel Button Sensor, 24” Leads, Spacers & Brass Nut10K-E1 Plastic Button Sensor, 24” Leads, Anchor10K-E1 Stainless Steel Button Sensor, 24” Leads, Spacers & Brass Nut20K Plastic Button Sensor, 24” Leads, Anchor20K Stainless Steel Button Sensor, 24” Leads, Spacers & Brass Nut100KS Plastic Button Sensor, 24” Leads, Anchor100KS Stainless Steel Button Sensor, 24” Leads, Spacers & Brass Nut-OR-Model # Example:122113A/CP-PBS1.8K | 3K | AN | AN-BC* | CP | CSI | 10KS* | 10K-E1 | 20K | 100KSA/PBS = Plastic Button | BBS = Brass Button | SBS = Stainless Steel ButtonOPTIONAL SENSOR ORDERINGA. Sensor Series No Selection RequiredB. Model Series Select One (1)C. Con guration Select One (1)---- = No NIST Certi cate | NIST = NIST Certi cate (Must Specify 1, 3 or 5 Points)D. NIST Select One (1)MODEL #A/Model # Example:A/A.3KB.SBSC.D.NISTNote*: AN-BC and 10KS are not available in PBSDIMENSIONAL DRAWINGfront & Top/Right ViewsSpacers / AnchorsØ.38”(9.53mm) Ø.70”(17.78mm)0.32”(8.20mm)1.26” (31.99mm)Wire Length: ~ 23”3/8” - 16 ThreadØ.74” (18.67mm)Probe Pushes Into Threaded InsertThreaded Insert Fits Inside 3/4” Hole1.00” (25.40mm).06”(1.40mm)Brass & Stainless Button SensorPlastic Button SensorNext >