Automation Components, Inc. 2305 Pleasant View Road | Middleton, WI 53562 Phone: 1-888-967-5224 | Website: workaci.com Page 1 Version: 1.0 I0000807 GENERAL INFORMATION The ACI Room and Stainless Pickup Ports are designed to be used in conjunction with any low dierential pressure transmitter (see ACI DLP or MLP2 Series) to provide an aesthetically pleasing building static reference point (pressure). They are oered in two dierent room enclosure options. When used in conjunction with a low dierential pressure transmitter, the pickup ports provide excellent accuracy and reliability. For optimal readings, follow these tips: • Make sure that the tubing is free of dirt, duct and condensation and that you keep the tubing run as short as possible in order to provide best response time. • Avoid locations next to supply air diusers or return air grill. • For building static pressure, an ideal inside location will be on rst oor in common hallway area. • To keep high pressure(positive) in the building or clean room, the high port should be installed in the building or clean room and the low port should be mounted outside or hallway. • To keep low pressure(negative) in a lab, the high port should be installed in the hallway and the low port should be mounted inside the lab. MOUNTING INSTRUCTIONS Room Series Separate the cover from the base. Attach the base directly to the wall or to a standard 2” x 4” junction box using the (2) #6-32 x 1” screws provided. Plate Series The ACI Stainless Plate temperature sensors are mounted on the back of a 1 Gang stainless steel plate. The foam pad will insulate the sensor from any drafts in the wall. There are (2) 6-32 x 3/4" machine screws provided for junction box mounting. Remove plastic lm o stainless steel cover. FIGURE 1: ROOM DIMENSIONS ROOM PICK UP PORT SERIES Installation & Operation Instructions Phone: 1-888-967-5224 Website: workaci.com 2.75” (69.85mm) 4.50” (114.30mm) Pickup Port Room [R] .65” (16.50mm) Will Compress Upon Installation .98” (24.82mm) 1.12” (28.55mm) 2.75” (69.85mm) 4.50” (114.30mm) Pickup Port Room [R2] Stainless Plate .65” (16.50mm) Will Compress Upon Installation .98” (24.82mm) 1.12” (28.55mm) 4.50” (114.30mm) 2.75” (69.85mm) .52” (13.17mm) .65” (16.50mm)FIGURE 2: PICKUP PORT ROOM MOUNTING FIGURE 3: STEEL PLATE MOUNTING Automation Components, Inc. 2305 Pleasant View Road | Middleton, WI 53562 Phone: 1-888-967-5224 | Website: workaci.com Page 2 Version: 1.0 I0000807 The sensor should be mounted in an area where air circulation is well mixed and not blocked by obstructions. Attach the 3/16“ I.D. tubing to the barb tting. Room units - After installation, attach the cover to the base by snapping the top of the cover on rst and then the bottom. Tighten the cover down, using the (2) 1/16” Allen screws located in the bottom of the housing. A 1/16” Hex driver is needed to secure the cover to the base.WARRANTY The ACIPick Up Port Series temperature sensors are covered by ACI’s Five (5) Year Limited Warranty, which is located in the front of ACI’S SENSORS & TRANSMITTERS CATALOG or can be found on ACI’s website: www.workaci.com. W.E.E.E. DIRECTIVE At the end of their useful life the packaging and product should be disposed of via a suitable recycling centre. Do not dispose of with household waste. Do not burn. PRODUCT SPECIFICATIONS - ROOM PICK UP PORTS Barbed tting accepts 3/16” ID exible Poly tubing Filter: 150 psi (10.3 bar) Medical Tubing (A/10’ Tube, A/20’ Tube, A/100’ Tube): 65 psi maximum at 73ºF (23ºC) 35º to 140ºF (2º to 60ºC) -40º to 140ºF (-40º to 60ºC) ABS | UL-94 HB A/R2-PUP: White A/R-PUP: Beige Cross-Linked Polyethylene | FMUSS-302 Nickel Plated Brass Tubing Connections: Maximum Operating Pressure: Operating Temperature Range: Storage Temperature Range: Enclosure Material | Flammability Rating: Enclosure Color: Foam Material | Flammability Rating: Filter Material: PRODUCT SPECIFICATIONS - STAINLESS WALL PLATES Barbed tting accepts 3/16” ID exible Poly tubing Filter: 150 psi (10.3 bar) Medical Tubing (A/10’ Tube, A/20’ Tube, A/100’ Tube): 65 psi maximum at 73ºF (23ºC) -40º to 150ºF (-40º to 66ºC) -40º to 160ºF (-40º to 71ºC) 302 Series Stainless Steel Silver (Metallic) | Brushed Stainless Steel Cross-Linked Polyethylene | FMUSS-302 Nickel Plated Brass Tubing Connections: Maximum Operating Pressure: Operating Temperature Range: Storage Temperature Range: Wall Plate Material: Wall Plate Color | Finish: Foam Material | Flammability Rating: Filter Material: Automation Components, Inc. 2305 Pleasant View Road | Middleton, WI 53562 Phone: 1-888-967-5224 | Website: workaci.com Page 3 Version: 1.0 I0000807Next >