Automation Components, Inc. MISC. DEVICES | RT - 3000 SMOKE DETECTOR MISC. DEVICES | ## Call: 1-888-967-5224 | Web: www.workaci.com SMOKE DETECTOR RT-3000 The RT-3000 is designed to be an installer and servicer friendly product line. It signi cantly reduces the total cost of ownership versus other comparable products. It o ers a host of “No-Tools Required” features, as well as a multi-application performance level unmatched in the industry. Duct smoke detectors are designed to prevent the recirculation of smoke in areas by air handling system’s fans and blowers. The RT-3000 is designed and built to meet all local requirements, as well as the NFPA regulations, regarding duct smoke detectors. Output terminals are provided for remote accessories such as horns, strobes, remote status indicators, and test/reset key switches or pushbuttons. Air sampling is accomplished via two tubes that protrude into the duct. An exhaust tube with a standard length of 7" is supplied in the installation kit with the unit. Once the duct size is determined, a sampling tube should be ordered. Three standard sizes including a 2.5', 5', and 10' lengths can be ordered and cut to the correct size of the duct. The weathertight NEMA 4X rated corrosion resistant enclosure coupled with extended temperature listings allow installation in the widest possible range of indoor/outdoor environments. The RT-3000 can be installed in both horizontal or vertical con gurations to match installation preferences. The ACI remote accessories are designed to be used with the ACI Duct Smoke detectors to provide audible and visual indication as well as remote test/rest functions. These devices mount to a standard single or double gang electrical backbox. Remote accessories are usually required by the AHJ (Inspector) for installation. If a duct smoke detector is not wired to a re system or a remote test station, when the unit goes into alarm, the end user would have to climb up to the duct to manually reset the unit. ACI o ers two series of remote accessories, The MS Series and the MSR-50R Series. Applications: Smoke Detection in HVAC Ducts in Commercial, Industrial & Residential Applications The RT-3000 Series is covered by ACI's Two (2) Year Limited Warranty, which is located in the front of ACI's Sensors & Transmitters catalog or can be found on ACI's website, which is: www.workaci.com. PRODUCT SPECIFICATIONS Supply Voltage: Maximum Operating Current (Standby): Maximum Operating Current (Alarm): Alarm Relay Contacts: Trouble Relay Contacts: Detection Head Type: Air Velocity: Wiring Connections: Conductor Size: Operating Temperature (RT-3000-N): Operating Temperature (RT-3000-P): Operating Humidity Range: Enclosure Material: NEMA Rating: Hardware Included: Enclosure Product Dimensions: Product Weights: Agency Approvals: Radioactive Element: 24 VAC/VDC, 115 VAC , 230 VAC 24 VDC: 45 mA | 24 VAC: 122.6 mA | 115 VAC: 31 mA | 230 VAC: 17 mA 24 VDC: 100 mA | 24 VAC: 251 mA | 115 VAC: 50 mA | 230 VAC: 29 mA Resistive Load: 2 sets form “C” rated at 10 Amps @ 125 VAC Resistive Load: 1 set form “A” rated at 1 Amps @ 30 VDC Resistive Load: 1 set form “C” rated at 10 Amps @ 125 VAC Resistive Load: 1 set form “B” rated at 7 Amps Photoelectric or Ionization: See Ordering Grid on Back of Data Sheet 100 to 4,000 ft / minute Screw Terminal Blocks Solid or Stranded: #14 to #24 AWG -4ºF to 158ºF (-20ºC to 70ºC) -4ºF to 140ºF (-20ºC to 60ºC) 10% to 93% RH (@32ºC) Non-Condensing / Non-Freezing Grey plastic backbox, white plastic cover (Makrolon 94V-0) NEMA 4X 7” exhaust tube, FAST Tube sectional sampling tube starter, sampling tube end cap, mounting template, test magnet, and mounting hardware included (L) 13.5” (342.9 mm) x (W) 5.5” (134.8 mm) x (H) 2.25” (57.15 mm) 3.5 lbs (1.59 kg) UL Listed (UL268A, UROX) File # S2829 CSFM Listed (3240-1004:121) For RT-3000-N (Ionization) Americium 241; 0.9 Micro-CurieAutomation Components, Inc. MISC. DEVICES | RT - 3000 SMOKE DETECTOR MISC. DEVICES | ## Call: 1-888-967-5224 | Web: www.workaci.com DIMENSIONAL DRAWING Front & Top ViewsRight View 14.26” (362.11mm) 4.90” (124.46mm) 6.00” (152.40mm) 3.10” (78.74mm) 1.10” (27.94mm) STANDARD ORDERING Model # RT-3000-N RT-3000-P Item # 128327 128328 Smoke Detector Type Ionization Photoelectric -OR-Model # Example:128327RT-3000-N SAMPLING TUBE ORDERING Model # FAST TUBE STN-1.0 STN-2.5 STN-5.0 STN-10.0 Item # 131201 111653 105793 105794 105795 Description Package of (3) 24" Sections | Sectional sampling tube, quickly assembled to length & UL Sampling Tube for 12” or less duct width Sampling Tube for 6” to 2.5’ duct width Sampling Tube for 2.5’ to 5.0’ duct width Sampling Tube for 5.0’ to 10.0’ duct width -OR-Model # Example:131201FAST TUBE ACCESSORIES ORDERING Model # 55000-225APO 55000-328APO TG-2000 Item # 110913 131873 128407 Description Replacement Ionization Detector Head Replacement Photoelectric Detector Head Aerosol Test Gas -OR- Model # Example: 11091355000-225APO Note*: See MS & MSR Series Data Sheets for Remote Wall Plate Accessories (usually required)Next >