Thermostat Type: Sensing Element: Sensing Media: Adjustable Trip Point Range: Trip Point Screw Location: Reset Options: Switching Di erential (Auto Reset Only): Contact Style: Contact Action: Contact Ratings: Wire Connections: Sensing Response: Sensing Capillary Material: Sensing Capillary Length: Sensing Capillary Diameter: Enclosure NEMA Rating: Enclosure Material: Enclosure Color | Finish: Conduit Entry: Operating Temperature Range: Storage Temperature Range: Sensing Capillary Overrun Temperature: Operating / Storage Humidity Range: Product Weight: Product Dimensions (L x W x H): Agency Approvals: Self-contained, electromechanical Vapor Pressure Temperature in air 15°F to 55°F (-9°C to 13°C); Factory set with Stop at 35°F(1.7°C) Slotted adjustment screw top of unit Manual and Automatic Resets available (See Ordering Grid back of data sheet) Approximately 5°F (2.8°C), Non-adjustable 4 Wires, 2 Circuits (Two simultaneously switching contacts (Circuits)) Line to M2 (Main): Open on Temperature Drop Line to M1 (Auxiliary/Alarm): Close on Temperature Drop See Electrical Ratings Table on back of data sheet Screw Terminals; Copper wire only rated to 90ºC (194ºF) minimum To lowest temperature sensed along any 14 to 16” (35.6 to 40.6 cm) length of sensing element Copper See Ordering Grid on Back of Data Sheet 0.125” (3.18 mm) NEMA 1 (IP10) Steel, galvanized Black | Baked Enamel ½” conduit knockout 0 to 140°F (-18 to 60°C) -40 to 158°F (-40 to 70°C) 400°F (204.4°C) maximum 0 to 95% RH, non-condensing A/FLS-06-x: A/FLS-10-x: A/FLS-20-x: 2.31 lbs. (1.046 kg) | A/FLS-50-x: A/FLS06-x, A/FLS-10-x, A/FLS-20-x: 8.125” (20.64 cm) x 6.375” (16.19 cm) x 2.625” (6.67 cm) A/FLS-50-x: 10.125” (25.72 cm) x 3.375” (16.19 cm) x 5.500” (13.97 cm) UL File # SA516 UL 873 | CSA File # LR948 C22.2 No. 24-199 | C-Tick # ACN 002 968 103 RoHS Compliant Automation Components, Inc. MISC. DEVICES | FREEZE STATS MISC. DEVICES | ## Call: 1-888-967-5224 | Web: www.workaci.com FREEZE STATS Manual & Automatic with Relay(s) The A/FLS Series Low Temperature Cutout Thermostat, otherwise known as a "Freeze Stats" are designed with a vapor charged capillary sensing element for use in equipment that requires low-temperature cutout protection. The purpose of the A/FLS Series freeze stats are to protect heating and cooling coils from freezing or to be used in any other equipment where temperature strati cation may occur. All A/FLS series devices are 4 Wire, two circuit devices that can be used to shut down your system upon the air temperature reaching the low temperature limit as well as to simultaneously switch on a local indicator or remote alarm when used with your building management system or controller. The A/FLS Freeze Stats or low limit switches are available in four standard lengths with either Automatic or Manual Resets based upon the system design requirements. A NEMA 1 rated metal enclosure comes standard with a ½” conduit knockout included for all line voltage connections. An optional mounting bracket and plenum rated nylon capillary mounting clips are available and must be ordered separately as listed on the back of this data sheet. Applications: Protect Heating and Cooling Coils, Low Temperature Limit Switch in applications where temperature strati cation may occur The A/FLS Series Freeze Stats are covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com. PRODUCT SPECIFICATIONSLINE-M1 (AUXILIARY) 120V 6.0 36.0 6.0 125 VA, 120 to 600 VAC and 57.5 VA, 120 to 300 VDC POLE NUMBER Motor Ratings (VAC) AC Full Load Amp AC Locked Rotor Amp AC Non-Inductive Amp Pilot Duty - Both Poles LINE-M2 (MAIN) 120V 16.0 96.0 16.0 125 VA, 120 to 600 VAC and 57.5 VA, 120 to 300 VDC 208V 9.2 55.2 9.2 240V 8.0 48.0 8.0 277V ---- ---- 7.2 208V 3.3 19.8 6.0 240V 3.0 18.0 6.0 277V ---- ---- 6.0 Front ViewRight ViewTop View Automation Components, Inc. MISC. DEVICES | FREEZE STATS DIMENSIONAL DRAWING MISC. DEVICES | ## Call: 1-888-967-5224 | Web: www.workaci.com 7.457” (189.4078mm) STANDARD ORDERING Model # A/FLS-06-A A/FLS-06-M A/FLS-10-A A/FLS-10-M A/FLS-20-A A/FLS-20-M A/FLS-50-A A/FLS-50-M Item # 145354 145355 145356 145357 145358 145359 145360 145361 Reset Style Automatic Manual Automatic Manual Automatic Manual Automatic Manual -OR-Model # Example:145354A/FLS-06-A ACCESSORIES ORDERING Model # FLS MTG BKT UNIVERSAL CLIP 6 UNIVERSAL CLIP 50 Item # 145434 145421 145430 Description FLS Series Mounting Bracket Universal Mounting Clip (Quantity 6) Universal Mounting Clip (Quantity: 50) -OR- Model # Example: 145430UNIVERSAL CLIP 50 2.056 3.243” (82.3722mm) 2.32” (58.928mm) 2.056” (52.2224mm) 3.977” (101.0158mm) ELECTRICAL RATINGS Capillary Length Feet (m) 6’ (1.83m) 6’ (1.83m) 10’ (3.05m) 10’ (3.05m) 20’ (6.10m) 20’ (6.10m) 50’ (15.24m) 50’ (15.24m) Description Freeze Stat_4 wires 2 circuits_Auto_6ft Freeze Stat_4 wires 2 circuits_Man_6ft Freeze Stat_4 wires 2 circuits_Auto_10ft Freeze Stat_4 wires 2 circuits_Man_10ft Freeze Stat_4 wires 2 circuits_Auto_20ft Freeze Stat_4 wires 2 circuits_Man_20ft Freeze Stat_4 wires 2 circuits_Auto_50ft Freeze Stat_4 wires 2 circuits_Man_50ftNext >