A/Balco Series1000 Ohm BalcoTemperature SensorThe A/Balco Series temperature sensors incorporate a thin film RTDsensor, which provides a predictable output over the specified temperaturerange of -40 to 240ºF. These sensors are available in a two-wireconfiguration incorporating high accuracy and interchangeabilitythroughout a wide operating temperature range.These units are offered in Room, Room with Set Point, Room withOverride,Room with Setpoint and Override, and Room with Setpoint,Override, and RJ11 Jack, Stainless Steel Duct and Duct without Box,Immersion, Stainless Plate, Raw, Strap-On, Bullet Probe, Button Sensorand Outdoor Air Configurations.All ACI Room sensors may be ordered with an optional setpoint (see charton the following page), override, or with a 4 pin RJ11 or 6 pin RJ12communication jack with terminal blocks for remote programming.The A/Balco Series is covered by ACI's Five (5) Year Limited Warranty, which is located in the front of ACI'S SENSORS & TRANSMITTERS CATALOG or can be found on ACI's web site, which is:www.workaci.com.Sensor Output 1000 Ohms @ 70ºF (21oC) Temp. Coefficient2.2 Ohms/deg F -40 to 240ºF (-40 to 116ºC) +/- 0.1% Temp. Operating RangeRTDRTDAttributes Specialized Temp. Sensor Double Potting Process avoids moisture issues Non-polarity sensitiveApplications OEM/Industrial Light Industrial DDC SystemsAttributes Specialized Temp. Sensor Double Potting Process avoids moisture issues Non-polarity sensitiveApplications OEM/Industrial Light Industrial DDC SystemsWiring Diagrams available at www.workaci.comAccuracyProduct Description Product Description Product Specifications Product Specifications Automation Components, Inc.2305 Pleasant View Rd. Middleton, WI 53562PH: (608) 831-2585FAX: (608) 831-7407For sensors with Display option, see the LCD Series cut sheet Made in the USAT-15Product DataProduct DataAutomation Components, Inc.ACIACIRELATIVE HUMIDITYTEMPERATUREPRESSURECURRENTGAS SENSORSACCESSORIESINTERFACE DEVICESOrdering Information A/Balco (choose configuration below) PB = Plastic Box GD = Galvanized Box BB = NEMA 3R4X = NEMA 4XEH = Euro Housing (Weather tight) Enclosure Keyo*Please note that the -PB (Plastic Box) is rated to 140 F and may not be suitable for high temperature applications. -Configuration -Length -Enclosure Type -Optional Plenum WireD (Duct) 4”, 8”, 12”, 18” PB, GD, BB, 4X, EHDO (Duct without Box) 4”, 8”, 12”, 18” - - - - - - - 6’CL2P, 10’CL2P, 20’CL2PI (Immersion w/ well) 2.5”, 4”, 6” PB*, GD, BB, 4X, EHINW (Immersion no well) 2.5”, 4”, 6” PB*, GD, BB, 4X, EHA (Copper Averaging) 8’, 12’, 24’ PB, GD, BB, 4X, EHFA (Flex. Cable Averaging) 8’, 12’, 24’ PB, GD, BB, 4X, EH RA (Rigid Averaging) 18”, 24”, 36” PB, GD, BB, 4X, EHS (Strap) - - - - - - - PB*, GD, 4XO (Outdoor Air) - - - - - - - EH, BB, 4XSP (Stainless Plate)W (Raw Potted Sensor)W-6’ (Raw w/ 6’ Leads)BP (Bullet Probe)BP-20’Z (BP w/20’ of Zip Wire)BBS (Brass Button Sensor)SBS (Stainless Button Sensor)PBS (Plastic Button Sensor)Example: A/Baclco-D-4”-PB2.200" 4.060" 2.000" PROBE Ø 0.250" Duct2.12”4.20”1.62”ImmersionOutdoor Air3.60”5.00”0.85”(Plastic Box)(Galvanized Box)(Euro Enclosure)Standard enclosure defaults:TEMPERATUREACCESSORIESINTERFACE DEVICESGAS SENSORSCURRENTPRESSURERELATIVE HUMIDITYT-162305 Pleasant View Road Middleton, WI 53562PH: (888) 967-5224 www.workaci.comImmersion units includea 304 SS thermowellConfiguration Communication JackPot Value*Setpoint Indicator*Pot Action* -[ ] -[ ] -[ ] -[ ] -[ ]R2 (Room)RJ4(4 Pin RJ11)400Cool | WarmDA(Direct)R2S*(Room w/ Setpoint) RJ6(6 Pin RJ12)1K55 to 85RA(Reverse)R2O (Room w/ Override)2K10 to 30oCR2SO* (Room w/ Setpoint & Override)5K8.5K10K20K100KRS232(Stereo Jack)3KRoom Sensors with* require setpoint specs (value, indication, and action) and are not listed on your packing slip or invoice. Example: A/BALCO-R2SO- 10K- Cool/Warm-DA or A/BALCO-RRoom configurations:R2= New Aries Enclosure OR R= Previous Infinity Enclosure (Please contact ACI for display options)RoomNEWNext >