WWW.LEGRAND.US/WATTSTOPPER LIGHTING CONTROL PANEL SYSTEMS WATTSTOPPER ® Description The InteliSwitch ® AS-100 Automatic Control Switch operates as both a manual and automatic control device. Manually, it allows users to control loads on/off. Automatically, it receives signals to turn lighting on or off from lighting control panels or other lighting control systems. Applications Since signaling is accomplished through power interruption, the AS-100 does not require additional signal wiring from a lighting control system or panel. It is designed for easy retrofit of lighting shutoff control in buildings. This greatly reduces installation labor and costs, making it an economical and effective lighting control strategy. Operation The AS-100 replaces a standard wall switch. Occupants turn the lights on and off manually by its pushbutton. However, when a timed power interrupt signal is received from a lighting control panel, the AS-100 is automatically commanded to turn on, turn off or delay off. The duration of the power interrupt signal determines how the AS-100 will operate (see Power Interruption Signals section). Used with a lighting control panel, the AS-100 allows users to manually turn lighting on in private offices, while lighting in common areas turns on automatically. After hours, if lights were not shut off by users, a signal from the control panel would command the switch to delay off. Lighting “blink” warns users that lights will turn off in five minutes. The locator LED on the AS-100 blinks and an audible beep sounds (if enabled). If the button is pushed during this five minutes, the shutoff will be cancelled and the switch will remain on until the next commanded shutoff signal. AUTOMATIC CONTROL SWITCH AS-100 SWITCHES • Settings are selected with the front pushbutton using configuration LEDs; face plate does not need to be removed for setup • Users can select automatic-on operation, and an audible beep warning • Selectable beep warning sounds every minute during last five minutes, and every five seconds during last minute • Five minute delay-off time with user ability to cancel impending shutoff • Self-adjusting zero crossing switching for consistent, reliable operation of high inrush loads • Can be used in 3-way, 4-way and multiway switching applications • Compatible with all electronic ballasts and motor loads • Microcontroller enhances reliability • Command off without delay off time • BAA/TAA-compliant models available Features Automatic or manual switching optionsPushbutton overrides the shutoff event Terminal style back-wiring Simple retrofit installation and operation; no neutral needed Multiway operation for 3- and 4-way switching Shutoff warning with optional audible beep during grace periodHotNeutral Load Lighting Control Panel Line Ground Signal Only * No connection for this application. Line Gr ound Load 3-W ay Line GroundGround Signal Only * Do not connect to line voltage Line Gr ound Load 3-W ay Line Gr ound Load 3-W ay Hot Lighting Control Panel Line Remote SwitchMaster Switch No Load Connection Load Neutral Signal Only * Do not connect to line voltage Each switch wired for multiway operation has the ability to turn on, turn off or override a shutoff signal. Automatic-ON Audible beep (during Automatic Delayed-off) Setup Mode Options: LED display (Option is on when LED flashes in display ) = Setup Mode options off (factory setting) = Audible beep (option on) = Automatic-ON (option on) = Automatic-ON & Audible beep (options on) = Unused • Dual voltage 120/277 VAC, 60 Hz • No minimum load requirements • Power interruption signal resolution ± 0.1 seconds • Dimensions: 2.69” x 1.75” x 1.81” (68.0mm x 45.0mm x 46.0mm) LxWxD • UL and CUL listed; five-year warranty Specifications Power Interruption Signals DurationOperationOperation Description Normal Operating Mode 1-2 secDelay offPower interruption “blinks” lights and initiates 5-minute delay before shutting load off. Locator light flashes and audible beep sounds (if enabled). Pushing the button cancels shut off from occurring. 3 secTurn onTurns load on if automatic on feature is enabled 5 secTurn offTurns load off Installation & Wiring InstallationSingle Switch Wiring with Panel Multiway Switch Wiring with PanelSetup Mode Options Ordering Information Catalog #ColorDescriptionLoad Requirement AS-100-WWhite 120 VAC, 60 Hz or 277 VAC, 60 Hz0-1300W @ 120 V Watt Ballast & Tungsten or 0-3000W @ 277 V Watt Ballast AS-100-ALt. Almond AS-100-IIvory On/Off Switch Wall Junction Box ASP-211 Locator LED One ASP-211 Single-gang Decorator Cover Plate included. Order ASP-422 for Two-gang Decorator Cover Plate with Blank Option, or ASP-432 for Two-gang Decorator Cover Plate with Toggle Switch Option (specify color).Next >