Z205513-0B PAGE 1 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 04121 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. TM ENVIRONMENTAL SENSORS INSTALLATION GUIDE Wall Plate Remote Pickup for PX AA56AA56 NOTICE • This product is not intended for life or safety applications. • Do not install this product in hazardous or classified locations. • Read and understand the instructions before installing this product. • Turn off all power supplying equipment before working on it. • The installer is responsible for conformance to all applicable codes. PRODUCT IDENTIFICATION AA56 Remote pickup wall plate INSTALLATION 1. Connect tubing between the fitting on the PX sensor and the fitting on the back of the AA56. 2. Mount the wall plate onto the wall in the area to be monitored. OPERATION Use the AA56 with the PX series dry media differential pressure transducer when the PX is not mounted in the area that needs to be monitored. Mount the AA56 in the testing area and connect it to the PX with tubing.Next >