Product Bulletin PAN-ENC1620WD Issue Date August 9, 2004 © 2004 Johnson Controls, Inc. 1 PAN-ENC1620WD 16 in. x 20 in. Control Panel Enclosure Figure 1: PAN-ENC1620WD Control Panel Enclosure Table 1: Contents Quantity Description 1 Enclosure Box with Control Panel Mounting Studs and Nuts 1 Enclosure Door on Lift-Off Hinges 1 Enclosure Lock with Key Technical Specifications Product Steel Control Panel Enclosure with Vent Louvers Terminals Ground Studs on Door and in Enclosure per Underwriters Laboratories, Inc® (UL) 508A Wiring Ground Wire: 14 AWG Between Door and Enclosure Box Ground Studs Enclosure Rating Type 1 Finish ANSI 61 Gray Polyester Powder Coating (Inside and Out over Phosphatized Surfaces) Dimensions 16 in. W x 20 in. H x 6.62 in. D (406 mm W x 508 mm H x 168 mm D) Agency Compliance UL 50 Rated, Canadian Standards Association (CSA) approved The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Code No. LIT-1201749 www.johnsoncontrols.com Next >