Single Outlet Surge Protection General Product Specifications DTK-1F Series DITEK single outlet surge protectors provide strong surge protection at a reasonable cost. The unique center screw design that secures the surge protector and, if installed, a transformer, to the wall prevents accidental disconnections. Models are available to protect AC power and telephone lines.DTK-1F DTK-1FF DTK-1F DTK-1FF Product Features •Single AC outlet protects critical equipment •Center screw secures to outlet and can also secure a connected transformer •Diagnostic LED indicates AC power, ground presence and suppressor function •Ten year limited warranty Specifications Agency Approvals: UL1449, 2 nd Edition February 2007, UL497A Service Voltage: 110-120VAC MCOV: 130VAC (Power and Telco) Connection: Direct plug-in (AC); RJ11/14 (DTK-1FF) Continuous Current: 15A (AC), 125mA (Telco) Max Surge Current: 32,000A (DTK-1F); 13,500A (1FF) Max Surge Energy: 300 Joules (DTK-1F); 195 Joules Protection Modes: L-G, L-N, N-G (AC); Tip-G, Ring- G, Tip-Ring (Telco) U.L. 1449 SVR: 330V (DTK-1F) Temperature Range: 0°C –70°C (0°F –158°F) Diagnostic LED:Red (DTK-1F, -1FF), Dimensions: 2.71”x 1.85”x 1.25” (69mm x 47mm x 32mm) Weight:.25lb (113g) Housing: ABS Selection Guide •AC protection –32,000A: DTK-1F •AC and Telco protection:DTK-1FF One DITEK Center 1720 Starkey Road Largo, FL 33771 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com Document: SPS-100001-001 Rev 8 10-09 ©2009 DITEK Corp. Specification Subject to ChangeNext >