ENGLISHDEUTSCHITALIANOESPAÑOLINSTALLATION GUIDEFRANÇAIS日本語Ceiling MountforAXIS 216FD Network CameraAXIS P3301 Network CameraDrop Ceiling Mount Installation GuidePage 3ENGLISHThis document contains instructions for installing the Drop Ceiling Mount for the AXIS 216FD and AXIS P3301 Network Cameras. Please read the complete guide before installation. To install the cameras on the network, please see the respective Installation Guides. For other details about the camera, see the User’s Manual, available from www.axis.com/techsup, or from the AXIS Network Video Product CD.Package contents•Outer ceiling bracket •Inner ceiling bracket•Plastic dome cover•6 Mounting screws (2 pcs M3x60, 2 pcs M3x10, 2 pcs M4x10)•Drop Ceiling Mount Installation Guide (this document)•Hole template•Safety wire & M4x6 screwTotal weight (camera plus ceiling mount): 0.82 kg (1.8 lb) Ceiling thickness: 9-60mm (0.35”-2.4”)Ceiling hole diameter: 154-160mm (6.1”-6.3”)SpecificationsAll measurements in millimetersPage 4Drop Ceiling Mount Installation GuideInstall the drop ceiling mount1.If possible, remove the ceiling tile in which the drop ceiling mount is to be fitted.2.For greater security, the camera can be secured using the supplied safety wire. Attach the end with the lock to a suitable point in the ceiling above the drop ceiling. 3.Use the supplied template to mark the position for the 154 mm hole in the ceiling tile. Remove the protective paper, fix to ceiling tile and cut around the template.Notes:The combined weight of the camera and ceiling mount is 0.82 kg (1.8 lb). Check that the ceiling material is strong enough to sup-port this weight. The thickness of the ceiling should be 9-60mm (0.35”-2.4”).4.Tilt and insert the outer ceiling bracket through the hole, and then pull it into place. The bracket should be positioned so that the 3 vertical tabs point downwards in the hole.5.Pull all of the required cables (network, power) and the safety wire down through the hole, ready for connection.Attach to ceilingAttach to cameraCeiling tileOuter ceiling bracketHole diameter 154-160mmDrop Ceiling Mount Installation GuidePage 5ENGLISH6.Screw the 2 M3x60 screws into the holes on the 2 horizontal tabs, visible from below. 7.Attach the safety wire to the camera, using the supplied M4x6 screw.Insert M3x60 screws(Viewed from below)Page 6Drop Ceiling Mount Installation Guide8.Using the 2 supplied M4x10 screws, mount the camera on the inner ceiling bracket, as illustrated here. Do not overtighten the screws, as this may damage the camera.9.Referring to the AXIS 216FD/AXIS P3301 Installation Guides, connect the required cabling to the appropriate connectors on the camera.Inner ceiling bracketScrew slotScrew slotM4x10Drop Ceiling Mount Installation GuidePage 7ENGLISH10.Lift and turn the inner bracket (with camera) so that the screws on the outer bracket enter the screw slots on the inner bracket. Make sure that the screws go all the way to the back of the slots. 11.Gently tighten the screws so that the ceiling tile is held between the inner and outer brackets. Check that none of the cabling is trapped by the brackets. 12.Referring to the AXIS 216FD/AXIS P3301 Installation Guide, adjust the position of the camera. 13.Slide the black protective shield on the inside of the dome cover so that the camera view is not obstructed.Align slots with screwsAlign slots with screwsPage 8Drop Ceiling Mount Installation Guide14.Attach the dome cover using the 2 supplied M3x10 screws. 15.For instructions on how to install the camera on your network, please see the AXIS 216FD and AXIS P3301 Installation Guides.M3x10Guide d'installation du support pour faux-plafondPage 9FRANÇAISCe document contient des instructions sur l'installation du support pour faux-plafond de la Caméra réseau AXIS 216FD/AXIS P3301. Lisez attentivement la totalité du guide avant de commencer l'installation. Pour installer la caméra sur le réseau, reportez-vous au Guide d'installation AXIS 216FD/ AXIS P3301. Pour d'autres informations sur l'utilisation de la caméra, reportez-vous au Manuel de l'utilisateur, disponible sur www.axis.com/techsup ou sur le CD du produit vidéo réseau Axis.Contenu de l'emballage•Support de plafond extérieur •Support de plafond intérieur•Capot de dôme en plastique•6 vis de montage (2 vis M3x60, 2 vis M3x10, 2 vis M4x10)•Guide d'installation du support pour faux-plafond (le présent document)•Gabarit de trou•Fil de sécurité et vis M4x6Poids total (caméra plus support plafond): 0.82 kg (1.8 lb)Épaisseur du plafond : 9-60 mm (0.35-2.4”)Diamètre du trou (plafond) : 154-160 mm (6.1-6.3”)SpécificationsNext >