DS-EIRX28M0-BA1-d2 EIRX28M-100T/4GT SHEET data The EIRX28M-100T/4GT industrial managed Ethernet switch from Contemporary Controls, provides compact 1U rack-mount design, flexible port configuration and high reliability. It provides error-free data transmission and network management functions in harsh industrial environments. The switch is equipped with four ports for 10/100 Mbps copper links, 20 ports for 100BASE-FX SFP links and 4 ports for 1000BASE- FX SFP links. It offers redundant power supply connections for sources providing 120 VAC. It can be installed with the included standard 1U rackmount kit. SFP stands for small form-factor pluggable allowing the customer to select a mix of single mode and multimode transceivers with LC connectors that plug into the SFP cages. In addition to three EIRX28M chassis configurations, UL recognized four SFP transceivers for 100 and 1000 Mbps data rates with a choice of single mode or multimode operation. The four gigabit ports on the EIRX28M are for backbone use to other EIRX28M switches possibly using the rapid spanning tree protocol (RSTP). The 100 Mbps fiber ports are intended for EIS6 edge switch connections. For copper connections, the EIRX28M has four fixed auto-negotiating 10/100 Mbps ports that can attach to EIS8 edge switches or UL 864 compliant end stations. EIRX28M-100T/4GT Managed Ethernet Switch — with 24 SFP Fibre Ports • Four 10/100 Mbps Copper Ports • Twenty Fast Ethernet SFP Ports • Four Gigabit Ethernet SFP Fibre Ports • Redundant Power Supply Input • Voltage Input: 120 VAC • Ingress Protection Degree: IP 40 • Alarming Output: One Channel Relay Output • Console Port : RJ45 Copper Port Hardware Features • Network Redundancy Technology • Private VLAN Partition • Trunking • Browser Configuration and Remote Management • QoS • IGMP Snooping/GMRP • SNMP • STP/RSTP • On-line Software Upgrading Software FeaturesStandards Compliant •UL 864 10th Ed. Recognized Component - Control Units and Acccessories for Fire Alarm Systems •ULC-S527-11 Control Units for Fire Alarm Systems •CE Mark •RoHS compliant •Industrial environment EMC compatible Page 1IEEE Standards: 802.3 10BASE-T Ethernet 802.3u 100BASE-TX and 100BASE-FX Fast Ethernet 802.3z 1000BASE-X Ethernet 802.3x Flow Control and Back Pressure 802.1p Class of Service 802.1Q VLAN Tag Protocols: IGMP Snooping, GRMP, SNMP v1/v2/v3, DHCP Cllinet, HTTP. HTTPS, Telnet, NTP Client Processing Type: Store-and-Forward Flow Control: Full Duplex Flow Control, Half Duplex Pressure Control MAC Address: 8K Transmission Distance: Twisted-pair is 100 m. Single Mode Fibre Optical Cable is up to 15 km. Mulitmode Fiber is up to 2 km. Port Counts: Four 10/100 Mbps Copper Ports Twenty 100BASE-FX SFP Ports Four 1000BASE-FX SFP Fibre Ports Regulatory Compliance: UL 864 10th Ed. Recognized component, Control Units and Accessories for Fire Alarm Systems ULC-S527-11 Control Units for Fire Alarm Systems CE Mark; CFR 47, Part 15 Class A; RoHS Page 2 Data Sheet — EIRX28M-100T/4GT DS-EIRX28M0-BA1-d2 Technology Power Input 120 VAC Fault Relay 2A @ 30V 4 RJ45 Ports LED Indicators 20 SFP Fibre Ports 4 Gigabit Fibre Ports Removable Mounting Brackets Redundant LEDsConsole PortPage 3 Data Sheet — EIRX28M-100T/4GT DS-EIRX28M0-BA1-d2 Console Port (RJ45): Baudrate: 115200 Data Bit: 8 Parity Bit: None Stop Bit: 1 Flow Control: None Console Functions: Overview, IP Setting, Factory Default Interfaces RJ45 Connector: 10/100 Auto-negotiation, Full/Half Duplex, Auto-MDI/MDIX Maximum transmission distance of CAT5 cable is 100 m. Optical Fibre Connector: LC Connector Optical Fibre Module: 100BASE-FX SFP Module and 1000Base-FX SFP (accessories optional) Relay Connector: Pluggagle two position terminal block Power Input Connector: Pluggable Terminal Block Physical Dimensions (mm): 44H x 443W x 350D Ingress Protection: IP40 Installation Method: Standard 1U Rackmount (leaving 1U of space between all devices for heat dissipation) SpecificationsPage 4 Data Sheet — EIRX28M-100T/4GT DS-EIRX28M0-BA1-d2 Mechanical Drawing All dimensions are in mm.Page 5 Data Sheet — EIRX28M-100T/4GT Ordering Information Model EIRX28M-100T/4GT SFP-MM100FX SFP-SM100FX SFP-MM1000LX SFP-SM1000LX Description Managed Ethernet switch chassis: 4 ports 10/100 Mbps copper, 20 ports 100Mbps SFP fiber, 4 ports 1000 Mbps SFP fiber Small Form-Factor Pluggable Fibre Module: 1310nm, multi-mode, 100 Mbps, LC style connector 2km, -40°C to +85°C Small Form-Factor Pluggable Fibre Module: 1310nm, single mode, 100 Mbps, LC style connector 15km, -40°C to +85°C Small Form-Factor Pluggable Fibre Module: 1310nm, multi-mode, 1000 Mbps, LC style connector 2km, -40°C to +85°C Small Form-Factor Pluggable Fibre Module: 1310nm, single mode, 1000 Mbps, LC style connector 15km, -40°C to +85°C Length and width of EIRX28M: DS-EIRX28M0-BA1-d2 — December 2015Next >