Sensor Type:Sensor Curve:Number Sensing Points:Number Wires:Sensor Output @ 25ºC (77ºF) |(Lead Wire Colors):Accuracy 0-70ºC (32-158ºF):Stability:Response Time (63% Step Change):Power Dissipation Constant:NIST Certication:Operating Temperature Range:Storage Temperature Range:Operating Humidity Range:Probe Material:Lead Length | Conductor Size:Lead Wire Insulation | Wire Rating:Conductor Material:Product Dimensions | Probe Diameter:Product Weight:Agency Approvals:Thermistor Non-Linear NTC (Negative Temperature Coecient)OneTwo (Non-Polarity Sensitive)A/1.8K: 1.8K nominal | (Red/Yellow)A/3K: 3K nominal | (White/Brown)A/AN (Type III): 10K nominal | (White/White)A/AN-BC: 5.238K nominal | (White/Yellow)A/CP (Type II): 10K nominal | (White/Green)+/-0.2ºC (+/-0.36ºF) except A/10K-E1 Series: +/- 0.3ºC (+/-0.54ºF)A/1.8K Series: +/- 0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)Sensor Dependent; Contact ACI for more information on the sensor in question.10 Seconds nominal3 mW/ºC except A/1.8K Series: 1 mW/ºC | A/10K-E1 Series: 2 mW/ºC1 Point, 3 Point, or 5 Point NIST Certicates available-40 to 150ºC (-40 to 302ºF)-40 to 85ºC (-40 to 185ºF)10 to 95% RH, non-condensing304 Stainless Steel4”, 6” and 8” Probes: 14” (35.6 cm) | 12” and 18” Probes: 24” (61cm) | 22 AWG (0.65mm)Etched Teon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)Silver Plated CopperSee table on back of product data sheet | 0.250” (6.35mm)4” = 0.028 lbs. (12.7g) | 6” = 0.036 lbs. (16.3g) | 8” = 0.044 lbs. (20g); 12” = 0.066 lbs. (29.9g) | 18” = 0.09 lbs. (40.8g) CE, RoHS2, WEEE Automation Components, Inc.TEMPERATURE | THERMISTORS | PROBE ONLYPRODUCT SPECIFICATIONSTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com A/CSI: 10K nominal | (Green/Yellow)A/10KS: 10K nominal | (White/Blue)A/10K-E1: 10K nominal | (Gray/Orange)A/20K: 20K nominal | (Brown/Blue)A/100KS: 100K nominal | (Black/Yellow)PROBE ONLYStainless Steel Probe, ThermistorThe ACI Thermistor Probe Only Series features a ¼” diameter stainless steel probe with two, 14” or 24 inch 22 AWG Etched Teon colored lead wires to dierentiate the dierent NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the eects of moisture upon the sensors and to increase the thermal response time using our high quality, thermally conductive epoxy. The probe is designed to be used in duct and immersion applications when used with the proper length thermowell. Applications: Roof Top Units, Air Handlers, Supply/Discharge Air/Return/Mixed/Exhaust Air Duct Temperature Sensing, Immersion Temperature Sensors, Replacement Temperature SensorsThe ACI Thermistor Probe Only Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Revision C0000002 | Rev 1.0Automation Components, Inc.TEMPERATURE | THERMISTORS | PROBE ONLYDIMENSIONAL DRAWINGStandard ViewTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com Ø.25” (6.35mm)Ø.33”(8.26mm)See Table BelowProbe Length4”6”8”12”18”Ref A (Insertion Length)4.00” ± 0.13“6.00 ± 0.13”8.00“ ± 0.13”12.00” ± 0.25“18.00” ± 0.25“1.8K | 3K | AN | AN-BC | CP | CSI | 10KS | 10K-E1 | 20K | 100KSA/PO = Probe Only4” = 4” Probe | 6” = 6” Probe | 8” = 8” Probe | 12” = 12” Probe | 18” = 18” ProbeCUSTOM ORDERINGA. Sensor Series No Selection RequiredB. Model Series Select One (1)C. Conguration No Selection RequiredD. Probe Length Select One (1)---- = No NIST Certicate | NIST = NIST Certicate (Must Specify 1, 3 or 5 Points)E. NIST Select One (1)MODEL #A/POModel # Example:1.8KB.A/A.POC.4”D.NISTE.ACCESSORIES ORDERINGModel #FITTING, BRASS, HIGH TEMP DUCTFITTING, 316 HIGH TEMP DUCTFITTING, 1/2" NPT, BRASS 1/4"FITTING, 316 HT IMMERSIONNSG HEAT TRANSFER PASTE 2OZNSG HEAT TRANSFER PASTE 16OZItem #137313100391130342100392102595140574DescriptionFitting, Brass, Compression, DuctFitting, 316SS, Compression, DuctFitting, Brass, Compression, ImmersionFitting, 316SS, Compression, ImmersionThermal Grease, 2 oz. Tube, Silicone Free, -40 to 320ºF (-40 to 160ºC)Thermal Grease, 16 oz. Jar, Silicone Free, -40 to 390ºF (-40 to 198ºC)Bore0.255”0.255”0.255”0.255”N/A**N/A**Thread Size1/8”-27 MNPT1/8”-27 MNPT1/2”-14 MNPT1/2”-14 MNPTN/A**N/A**-OR-Model # Example:100391FITTING, 316 HIGH TEMP DUCTNote**: N/A denotes that it isn’t applicable for these partsNext >