Automation Components, Inc.Stainless Steel Pigtail SyphonsThe A/SYPHON Series has been designed to provide protection for the ACI Gage and Wet to WetDifferential Pressure transmitters from damage in boiler applications where the operating temperature of the steam being monitored is higher than the maximum operating temperature of the pressure transducer. Three different bend configurations of 90º, 180º, and 270º are available in order to allow the mounting of the pressure transducer vertically away from the main pipe. When mounting the Pigtail Syphons, make sure that the syphon is fully exposed to the ambient air and not covered by any pipe insulation. The Pigtail Syphons feature a stainless steel construction with ¼” Male NPT pipe threads and are compatible with a wide range of gases and liquids. The A/SYPHON Series is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's web site, www.workaci.com.Automation Components, Inc.SYPHON SERIESSYPHON SERIESPRESSURE180º270º90ºOPERATING TEMPERATURE, OPERATING PRESSURE TABLETemp (ºF)Temp (ºC)316 SS Schedule 40 (PSI max)316 SS Schedule 80 (PSI max)Notes:SPECIFICATIONSAutomation Components, Inc.Select one Configuration Type (A). Configuration1-888-967-5224 www.workaci.com After completing (A) from the above table, fill in the Part Number Table below. An example part number is offered. EXAMPLE: A/SYPHON-90-HBUILD PART NUMBER Material TypeThreads (Mnpt x Mnpt)Pipe ScheduleOperating TemperatureOperating PressureBend ConfigurationsWelded 316 Series Stainless Steel1/4” x 1/4” Male NPTA/SYPHON Schedule 40 | A/SYPHON-H: Schedule 80See table belowSee table below90º, 180º, or 270º20 to 10020030040050060065070075080085090095010001050110011501200125013001350140014501500-6.7 to 37.793.2148.7204.2259.7315.2342370.7398.5426.2453481.7509.5537.2564592.7620.5648.2676703.7731.5759.2786814.71192111799190984279778276775273773773072271570870563248035826719814511484258024192145196718221725169316611629159615961580156415481532154114061068796593441322254186PRESSURESYPHON SERIESORDERINGA/SYPHON-90 (90º Syphon)A/SYPHON-90-H (90º Syphon, Heavy) (Schedule 80)A/SYPHON-180 (180º Syphon)A/SYPHON-180-H (180º Syphon, Heavy) (Schedule 80)A/SYPHON-270 (270º Syphon)A/SYPHON-270-H (270º Syphon, Heavy) (Schedule 80)1) Pressure/Temperature ratings are established on the basis of calculation in accordance with the ASME Boiler and Pressure Vessel Code, 1996 edition, 1995 Addenda, Section 1, Paragraph PG27. It is the end users responsibiity to ensure that all components used in Pressure retaining service are adequately designed for the anticipated conditions.2) No Allowance has been provided for corrosion.Next >