Automation Components, Inc.WIRELESS | SST2630WIRELESS | ## Call: 1-888-967-5224 | Web: www.workaci.com PRODUCT SPECIFICATIONSInput Voltage:Battery Life:Operating Temperature Range:Operating Humidity Range:Storage Temperature Range:Sensor Range:Accuracy:Probe Dimensions:Cable Length | Cable Type:Fitting:Data Protocol:RF Characteristics:Sensor Data Transmission Time:Transmission Distance:Enclosure Material | Flammability Rating:Product Dimensions:Product Weight:Battery; 1 (Duracell DL123A), Lithium 3V 1400 mAh 45 mA maximum 2-3 years typical14 to 140ºF (-10 to 60ºC)5 to 65%, Non-condensing0 to 176ºF (-17 to 80ºC), 5 to 65% RH, Non-condensing-40 to 200ºF (-40 to 93ºC)+/- 1ºF (+/- 0.555ºC) 12 bit resolutionLength: 2” (50.8 mm) | Diameter: 0.25”(6.35mm) | Material: 304 stainless steel20’ (6.09m) | CL2P plenum ratedNylon 6/6, Flammability rating UL94V-2IEEE 802.15.4-2003/2006900 MHz, Operating Frequency 10 channels between 902 – 928 MHzTransmitter Power: 11 dBm | Receiver Sensitivity: -11 dBm 75 seconds (default) | 300 seconds (optional)200 – 300 ft horizontally depending on building type and construction and typically one oorabove and below the transceiver verticallyStandard: ABS Plastic | UL 94 | NEMA 4X: Polycarbonate Plastic | UL94-HBStandard: (L) 5.77” (146.56 mm) x (W) 3.19” (81.03 mm) x (H) 1.88” (47.75 mm)NEMA 4X: (L) 4.52” (114.81 mm) x (W) 2.55“ (64.77 mm) x (H) 2.16” (54.86 mm) Standard: 0.95 lbs (0.43 kg) | NEMA 4X: 0.95 lbs (0.43 kg)SST2630 Remote Temperature Probe / Strap-OnThe SST2630 is a battery operated wireless temperature sensor that can be used as a remote probe for monitoring refrigeration or strap-on for pipes using the reliable 900MHz spread spectrum technology for communication. The sensing element is in a 2”, 0.25” O.D. stainless steel probe with a 20’ cable length that will be able to cover most duct applications. The SST2630 is available with a standard or NEMA 4X enclosure. The SST2630 will send the temperature wirelessly to the RM2432D receiver, which converts the wireless signal to voltage for use with a DDC controller, or to a transceiver that will send the data to a BAS using BACnet, Modbus, or Lonworks protocol. Transmission distance in a typical building is 200-300 feet horizontal depending on the layout and construction of the building, and one oor above and one oor below the transceiver. Sensor distance and reliability can be increased with the addition of a RR2552B(s) repeater.Applications: Museums, Churches, Historical Buildings & New ConstructionThe SST2630 is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.StandardNEMA 4XSTANDARD ORDERINGModel #SST2630ASST2630A-300SST2630AESST2630AE-300Item #133986----134784----DescriptionWireless Remote Strap-On Temperature Sensor (20’ Plenum Cable), Standard EnclosureWireless Remote Strap-On Temperature Sensor (20’ Plenum Cable), Standard Enclosure, 300 Second IntervalWireless Remote Strap-On Temperature Sensor (20’ Plenum Cable), NEMA 4X Enclosure Wireless Remote Strap-On Temperature Sensor (20’ Plenum Cable), NEMA 4X Enclosure, 300 Second Interval-OR-Model # Example:133986SST2630AAutomation Components, Inc.WIRELESS | SST2630WIRELESS | ## Call: 1-888-967-5224 | Web: www.workaci.com DIMENSIONAL DRAWINGFront ViewTop ViewStandardNEMA 4XØ.19”(4.83mm)0.80”(20.32mm)4.60” (116.84mm)5.77” (146.56mm)2.00” (50.80mm)Ø.25”(6.35mm)20’ (6.09m) CL2P Cable4.52” (114.81mm)2.55” (64.77mm)2.00” (50.80mm)Ø.25”(6.35mm)20’ (6.09m) CL2P Cable1.88” (47.75mm)3.19”(81.03mm)2.16” (54.86mm)Next >