Sensor Type | Sensor Curve:Number Sensing Points:Number Wires:Sensor Output @ 0ºC (32ºF):Sensor Accuracy @ 0ºC (32ºF):Din Standard | Temperature Coecient:Sensor Stability:Response Time (63% Step Change)Self-Heating | Maximum Operating Current:Operating | Storage Temperature Range:Operating Humidity Range:Lead Length | Conductor Size:Lead Wire Insulation | Wire Rating:Conductor Material:Probe Material:Product Dimensions | Probe Diameter:Product Weight:Agency Approvals:Platinum RTD | PTC (Positive Temperature Coecient)OneA/100-2W-PO-XX” Series and A/1K-2W-PO-XX Series: Two (Non-Polarity Sensitive)A/1K-2W-PO-XX” Series and A/1K-3W-PO-XX Series: Three (Polarity Sensitive)A/100-xW-PO Series: 100 Ohms nominal | A/1K-xW-PO Series: 1000 Ohms nominal +/- 0.06% Class A (Tolerance Formula: +/- ºC = (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC)-40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF)200ºC (392ºF): +/- 0.55ºC (+/- 0.99ºF)DIN EN 60751 (IEC 751) | 3850 ppm / ºC+/- 0.03% after 1000 Hours @ 300ºC (572ºF)8 Seconds nominal100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA | 1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA-40 to 200ºC (-40 to 392ºF) | -40 to 85ºC (-40 to 185ºF)10 to 95% RH, non-condensing4”, 6” and 8” Probes: 14” (35.6 cm) | 12” and 18” Probes: 24” (61cm) | 22 AWG (0.65mm)Etched Teon (PTFE) Colored Leads | MIL-W-16878/4 (Type E) Silver Plated Copper304 Stainless SteelSee table on back of product data sheet | 0.250” (6.35mm)4” = 0.028 lbs. (12.7g) | 6” = 0.036 lbs. (16.3g) | 8” = 0.044 lbs. (20g); 12” = 0.066 lbs. (29.9g) | 18” = 0.09 lbs. (40.8g) CE, RoHS2, WEEE Automation Components, Inc.TEMPERATURE | PLATINUM RTDS | PROBE ONLYPRODUCT SPECIFICATIONSTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com PROBE ONLYStainless Steel Probe, Platinum RTDThe ACI Platinum Probe Only Series features a ¼” diameter stainless steel probe with two or three, 14 or 24 inch, 22 AWG Etched Teon colored lead wires to dierentiate the dierent sensor types. The three-wire “-3W” option should be ordered if using with a 3-Wire temperature transmitter or sensor conguration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any external lead wire resistance that will aect your sensor output. ACI recommends the use of an 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD sensor. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the eects of moisture on the sensors and to increase the thermal response time using our high quality, thermally conductive epoxy. The probe is designed to be used in duct and immersion applications when used with the proper length thermowell. Optional lead length, cable types and NIST Certicates are available as referenced in the ordering grid on the Product Data Sheet. Please contact ACI for more information regarding this sensor or to discuss your application in further detail. Other options that may be available upon request.Applications: Roof Top Units, Air Handlers, Supply/Discharge Air/Return/Mixed/Exhaust Air Duct Temperature Sensing, Immersion Temperature Sensors, Replacement Temperature Sensors, Hydronic Water SystemsThe ACI Platinum Probe Only Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Revision C0000002 | Rev 1.0Automation Components, Inc.TEMPERATURE | PLATINUM RTDS | PROBE ONLYTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com 100 = 100 Ohm Platinum RTD | 1K = 1000 Ohm Platinum RTDA/PO = Probe Only4” = 4” Probe | 6” = 6” Probe | 8” = 8” Probe | 12” = 12” Probe | 18” = 18” ProbeCUSTOM ORDERINGA. Sensor Series No Selection RequiredB. Model Series Select One (1)2W = Two Wires | 3W = Three WiresC. Number of Wires Select One (1)D. Conguration No Selection RequiredE. Probe Length Select One (1)MODEL #A/POModel # Example:2WC.1KB.A.POD.4”E.NISTF.A/DIMENSIONAL DRAWINGStandard ViewØ.25” (6.35mm)Ø.33”(8.26mm)See Table BelowProbe Length4”6”8”12”18”Ref A (Insertion Length)4.00” ± 0.13“6.00 ± 0.13”8.00“ ± 0.13”12.00” ± 0.25“18.00” ± 0.25“---- = No NIST Certicate | NIST = NIST Certicate (Must Specify 1, 3 or 5 Points)F. NIST Select One (1)ACCESSORIES ORDERINGModel #FITTING, BRASS, HIGH TEMP DUCTFITTING, 316 HIGH TEMP DUCTFITTING, 1/2" NPT, BRASS 1/4"FITTING, 316 HT IMMERSIONNSG HEAT TRANSFER PASTE 2OZNSG HEAT TRANSFER PASTE 16OZItem #137313100391130342100392102595140574DescriptionFitting, Brass, Compression, DuctFitting, 316SS, Compression, DuctFitting, Brass, Compression, ImmersionFitting, 316SS, Compression, ImmersionThermal Grease, 2 oz. Tube, Silicone Free, -40 to 320ºF (-40 to 160ºC)Thermal Grease, 16 oz. Jar, Silicone Free, -40 to 390ºF (-40 to 198ºC)Bore0.255”0.255”0.255”0.255”N/A**N/A**Thread Size1/8”-27 MNPT1/8”-27 MNPT1/2”-14 MNPT1/2”-14 MNPTN/A**N/A**-OR-Model # Example:100391FITTING, 316 HIGH TEMP DUCTNote**: N/A denotes that it isn’t applicable for these partsNext >