Sensing Additional Reference PressuresThe ACI pickup port series is used in conjunction with a differential pressure transmitter (see the A/LP2 or A/DP2 series) to sense additional reference pressures. The A/SP-PUP unit is a brushed stainless steel plate, while the A/R2-PUP and A/R-PUP units are mounted in ABS plastic room enclosures. The A/O-PUP is designed to measure pressure outside and has two mounting configurations. When used in conjunction with an ACI pressure transmitter, the ACI pickup ports provide excellent accuracy and reliability. ACI also offers tubing to be used in conjunction with the A/LP2, A/MLP, and A/DP2 Pressure Series. The A/R2-PUP, A/R-PUP, A/SP-PUP, A/O-PUP, and the A/10’ TUBE are covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's web site, www.workaci.com.PICKUP PORTSPT 9.7””Outside Pickup Port-VerticalR2 with Pickup PortRoom with Pickup PortSteel Plate with Pickup Port10’ of Medical Grade TubingOutside Pickup Port-HorizontalFeatured Pickup Port59Automation Components, Inc.Automation Components, Inc.PICKUP PORTSPRESSUREMade in the USAORDERINGSPECIFICATIONSSelect one Pickup Port (A) and one Optional Accessory, if desired. Pickup Port Optional AccessoryA/O-PUP-H (Outside Pickup Port, Horizontal Mount)A/O-PUP-V (Outside Pickup Port, Vertical Mount)A/10’ TUBE (10’ Section of Medical Grade Tubing)A/R2-PUP (R2, Pickup Port)A/R-PUP (Room, Pickup Port)A/SP-PUP (Steel Plate with Pickup Port)ConnectionsOperating Temperature RangeEnclosure MaterialsMaximum Operating PressureProduct Dimensions (R2 with Pickup Port)Product Dimensions (Room with Pickup Port)Product Dimensions (Steel Plate with Pickup Port)Product Dimensions (Outside Pickup Port-Horizontal)Product Dimensions (Outside Pickup Port-Vertical)Product Dimensions (Medical Grade Tubing)Barbed fitting for 3/16” I.D. Tubing35oF to 140oF (1.6oC to 60oC)Stainless Plate: 302 stainless steel Room Enclosure: ABS plasticFilter: 150 psi(H) 4.50” (W) 2.75” (D) 1.12” (H) 4.51” (W) 2.75” (D) 2.90” Plate: (H) 4.51” (W) 2.76” (D) 0.19” (H) 3.29” (W) 8.32” (D) 3.95”(H) 3.95” (W) 9.03” (D) 2.29”(L) 10’ 60After completing (A) from the above table, fill in the Part Number Table below. An example part number is offered. EXAMPLE: A/SP-PUPEXAMPLE: A/10’ TUBEBUILD PART NUMBER Automation Components, Inc.1-888-967-5224 www.workaci.com PRESSUREPICKUP PORTSNext >