Sensor Type | Sensor Curve: Number Sensing Points: Number Wires: Sensor Output @ 21.1ºC (70ºF) | Lead Wire Colors: Sensor Accuracy: Din Standard | Temperature Coecient (0-100ºC): Sensor Stability: Response Time (63% Step Change) Self-Heating | Maximum Operating Current: Operating Temperature Range: Storage Temperature Range: Operating Humidity Range: Probe Material: Lead Length | Conductor Size: Lead Wire Insulation | Wire Rating: Conductor Material: Product Dimensions | Probe Diameter: Product Weight: Agency Approvals: Nickel RTD | PTC (Positive Temperature Coecient) One Two (Non-Polarity Sensitive) 1000 Ohms nominal | (Red/Red) -40ºC (-40ºF): +/- 1.52ºC (+/- 2.73ºF) 0ºC (-40ºF): +/- 0.4ºC (+/- 0.72ºF) 21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF) 54.4ºC (130ºF): +/- 0.56ºC (+/- 1.00ºF) 121ºC (250ºF): +/- 1.25ºC (+/- 2.25ºF) Din 43760 | 6370 ppm/ºC +/- 0.05% after 1000 Hours @ 150ºC (302ºF) 8 Seconds nominal 0.3ºC/mW (Still Air) | 5 mA -40 to 121ºC (-40 to 250ºF) -40 to 85ºC (-40 to 185ºF) 10 to 95% RH, non-condensing 304 Stainless Steel 4”, 6” and 8” Probes: 14” (35.6 cm); 12” and 18” Probes: 24” (61cm) | 22 AWG (0.65mm) Etched Teon (PTFE) Colored Leads | MIL-W-16878/4 (Type E) Silver Plated Copper See table on back of product data sheet | 0.250” (6.35mm) 4” = 0.028 lbs. (12.7g) | 6” = 0.036 lbs. (16.3g) | 8” = 0.044 lbs. (20g); 12” = 0.066 lbs. (29.9g) | 18” = 0.09 lbs. (40.8g) CE, RoHS2, WEEE Automation Components, Inc. TEMPERATURE | NICKEL RTDS | PROBE ONLY PRODUCT SPECIFICATIONS TEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com PROBE ONLY Stainless Steel Probe, Nickel RTD The ACI Nickel Probe Only Series features a ¼” diameter stainless steel probe with two, 14” or 24 inch 22 AWG Etched Teon colored lead wires to dierentiate the dierent sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the eects of moisture on the sensors and to increase the thermal response time using our high quality, thermally conductive epoxy. The probe is designed to be used in either duct and immersion applications when used with the proper length thermowell. Optional lead lengths, cable types and NIST Certicates are available as referenced in the ordering grid on the Product Data Sheet. Please contact ACI for more information regarding this sensor or to discuss your application in further detail. Other options that may be available upon request. Applications: Roof Top Units, Air Handlers, Supply/Discharge Air/Return/Mixed/Exhaust Air Duct Temperature Sensing, Immersion Temperature Sensors, Replacement Temperature Sensors The ACI Nickel Probe Only Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.Revision C0000002 | Rev 1.0 Automation Components, Inc. TEMPERATURE | NICKEL RTDS | PROBE ONLY TEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com DIMENSIONAL DRAWING Standard View Ø.25” (6.35mm)Ø.33” (8.26mm) See Table Below Probe Length 4” 6” 8” 12” 18” Ref A (Insertion Length) 4.00” ± 0.13“ 6.00 ± 0.13” 8.00“ ± 0.13” 12.00” ± 0.25“ 18.00” ± 0.25“ 1K-NI A/ PO = Probe Only 4” = 4” Probe | 6” = 6” Probe | 8” = 8” Probe | 12” = 12” Probe | 18” = 18” Probe CUSTOM ORDERING A. Sensor Series No Selection Required B. Model Series No Selection Required C. Conguration No Selection Required D. Probe Length Select One (1) ---- = No NIST Certicate | NIST = NIST Certicate (Must Specify 1, 3 or 5 Points) E. NIST Select One (1) MODEL # A/ 1K-NI PO Model # Example: 1K-NI B. A/ A. PO C. 4” D. NIST E. ACCESSORIES ORDERING Model # FITTING, BRASS, HIGH TEMP DUCT FITTING, 316 HIGH TEMP DUCT FITTING, 1/2" NPT, BRASS 1/4" FITTING, 316 HT IMMERSION NSG HEAT TRANSFER PASTE 2OZ NSG HEAT TRANSFER PASTE 16OZ Item # 137313 100391 130342 100392 102595 140574 Description Fitting, Brass, Compression, Duct Fitting, 316SS, Compression, Duct Fitting, Brass, Compression, Immersion Fitting, 316SS, Compression, Immersion Thermal Grease, 2 oz. Tube, Silicone Free, -40 to 320ºF (-40 to 160ºC) Thermal Grease, 16 oz. Jar, Silicone Free, -40 to 390ºF (-40 to 198ºC) Bore 0.255” 0.255” 0.255” 0.255” N/A** N/A** Thread Size 1/8”-27 MNPT 1/8”-27 MNPT 1/2”-14 MNPT 1/2”-14 MNPT N/A** N/A** -OR-Model # Example: 100391FITTING, 316 HIGH TEMP DUCT Note**: N/A denotes that it isn’t applicable for these partsNext >