Sensor Type | Sensor Curve:Number Sensing Points:Number Wires:Sensor Output @21.1ºC (70ºF) | Lead Wire Colors:Sensor Accuracy:Din Standard | Temperature Coecient (0-100ºC):Sensor Stability:Response Time (63% Step Change):Self-Heating | Maximum Operating Current:Pipe Mount Sensor Enclosure Material:Pipe Sizes Accepted:Operating Temperature Range:Storage Temperature Range:Operating Humidity Range:Lead Length | Conductor Size:Lead Wire Insulation | Wire Rating:Conductor Material:Product Dimensions (Length x Diameter):Product Weight:Agency Approvals:Nickel RTD | PTC (Positive Temperature Coecient)OneTwo (Non-Polarity Sensitive)1000 Ohms nominal | Red/Red-40ºC (-40ºF): +/- 1.52ºC (+/- 2.73ºF) 0ºC (32ºF): +/- 0.4ºC (+/- 0.72ºF) 21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF)) 54.4ºC (130ºF): +/- 0.56ºC (1.00ºF) 121ºC (250ºF): +/- 1.25ºC (+/- 2.25ºF) Din 43760 | 6370 ppm/ºC+/- 0.05% after 1000 Hours @ 150ºC (302ºF)15 Seconds nominal0.3ºC / mW (Still Air) | 5 mABrass½” (12.7mm) to 1” (25.4mm)-40 to 121ºC (-40 to 250ºF)-40 to 85ºC (-40 to 185ºF)10 to 95% RH condensing24” (61cm) | 22 AWG (0.65mm)Etched Teon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)Silver Plated Copper1.10” (27.9mm) x 0.375” (9.53mm)0.05 lbs. (22.68g)CE, RoHS2, WEEEAutomation Components, Inc.TEMPERATURE | NICKEL RTDS | PIPE MOUNT PRODUCT SPECIFICATIONSTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com PIPE MOUNTSmall Pipe/Coil Sensor, Nickel RTDThe ACI Nickel Pipe Mount Series features a 1.1” long Brass sensing enclosure with slight curvature on the bottom that is designed to increase the surface area and improve thermal conductivity between the pipe and sensor. Each sensor has two, 24 inch 22 AWG Etched Teon colored lead wires to dierentiate many dierent sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the eects of moisture upon the sensors and to improve the thermal response times using our high quality, thermally conductive epoxy. The Pipe Mount sensor should be used on pipe or coil sizes from 1/2” to 1” in diameter and condensing environments. A 7.5” nylon wire tie is supplied for fastening the sensor to the top of the pipe. For best accuracy and increased thermal conduction between the pipe and the sensor, we recommend cleaning the pipe and to use thermal grease between the mating surfaces and then to insulate the sensor from the eects of the ambient air. An optional plenum rated cable or NIST Certicates can be ordered as referenced in the ordering grid. Please contact ACI for more information regarding this sensor or to discuss your application in further detail. Other Options may be available upon request.Applications: Cooling Coils, Heating Coils, Hot Water Systems, Chilled Water Systems, Hydronic Heating Systems, ChillersThe ACI Nickel Pipe Mount Series is covered by ACI's Five (5) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.1K-NIRevision C0000002 | Rev 1.0Automation Components, Inc.TEMPERATURE | NICKEL RTDS | PIPE MOUNTTEMPERATURE | ## Call: 1-888-967-5224 | Web: www.workaci.com 1K-NIA/PM = 1.1” Brass Pipe Mount Sensor---- = Standard (24” Etched Teon) | 10’ = 10 Feet (3.05m) | 20’ = 20 Feet** (6.10m)OPTIONAL SENSOR ORDERINGA. Sensor Series No Selection RequiredB. Model Series No Selection RequiredC. Conguration No Selection RequiredD. Lead Length Select One (1)---- = Standard (24” Teon Colored Leads) | CL2P = Plenum Rated Cable E. Lead Wire Type Select One (1)---- = No NIST Certicate | NIST = NIST Certicate (Must Specify 1, 3 or 5 Points)F. NIST Select One (1)MODEL #A/PMSTANDARD ORDERINGModel #A/1K-NI-PMItem #138656Description1K Nickel, Pipe Mount, 24” Leads -OR-Model # Example:138656A/1K-NI-PMModel # Example:A/A.1K-NIB.PMC.20’D.E.NISTF.Note*: The 20’ Length is not CE Compliant but it is RoHS CompliantDIMENSIONAL DRAWINGStandard ViewØ.38” (9.53mm)1.10” (27.94mm).31” Strip Length(7.87mm)23.00” (584.20mm)ACCESSORIES ORDERINGModel #HARDWARE, 2” HOSE CLAMPNSG HEAT TRANSFER PASTE 2OZNSG HEAT TRANSFER PASTE 16OZItem #100235102595140574DescriptionHardware, 2” Hose Clamp, Quick Release Worm Gear, 201/301 Stainless SteelThermal Grease, 2 oz. Tube, Silicone Free, -40 to 320ºF (-40 to 160ºC)Thermal Grease, 16 oz. Jar, Silicone Free, -40 to 390ºF (-40 to 198ºC)-OR-Model # Example:100235HARDWARE, 2” HOSE CLAMPNext >