Automation Components, Inc.WIRELESS | FT2630WIRELESS | ## Call: 1-888-967-5224 | Web: www.workaci.com PRODUCT SPECIFICATIONSInput Voltage:Battery Life:Operating Temperature Range:Operating Humidity Range:Storage Temperature/RH Range:Sensor Temperature Range:Accuracy:Probe Material:Probe Diameter:Probe Lengths:Thermowells:Fitting / Flammability Rating:Data Protocol:RF Characteristics:Sensor Data Transmission Time:Transmission Distance:Enclosure Material:Flammability Rating: Product Dimensions:Product Weight:Battery; 1 (Duracell DL123A), Lithium 3V 1400 mAh 45 mA maximum 2-3 years typical14 to 140ºF (-10 to 60ºC)5 to 65%, Non-condensingTemperature: 0 to 176ºF (-17 to 80ºC) | Humidity: 5 to 65%, Non-condensing-40 to 200ºF (-40 to 93ºC)+/- 1ºF (+/- 0.555ºC) 12 bit resolution304 Stainless Steel0.250” (6.35mm)2.5”, 4”, & 6“304 Stainless Steel, ½” NPT Process Threads, ½” NPS Instrument ThreadsST801A Polyamide 66 Plastic (PA66) toughened “Zytel”, UL94-HBIEEE 802.15.4-2003/2006900 MHz, Operating Frequency 10 channels between 902 – 928 MHzTransmitter Power: 11 dBm | Receiver Sensitivity: -11dBm 75 seconds (default) | 300 seconds (optional)200 – 300 ft horizontally depending on building type and construction, and typically one oorabove and below the transceiver verticallyStandard: ABS PlasticNEMA 4X: Polycarbonate PlasticStandard: UL94NEMA 4X: UL94-HBStandard: (L) 5.77” (146.56 mm) x (W) 3.19” (81.03 mm) x (H) 1.88” (47.75 mm)NEMA 4X: (L) 4.52” (114.81 mm) x (W) 3.54” (89.92 mm) x (H) 2.16” (54.86 mm) FT2630A-02: 0.98 lbs (0.45 kg)FT2630A-04: 0.99 lbs (0.45 kg)FT2630A-06: 1.00 lbs (0.45 kg)FT2630A-02-SS: 1.28 lbs (0.58 kg)FT2630Immersion TemperatureThe FT2630 is a battery operated wireless immersion sensor that can be used where the installation of a wired sensor would be too expensive. The probe is made of 304 stainless steel with a 0.25" O.D. and is available with insertion lengths of 2.5", 4", and 6". The sensor assembly uses a tting that will work with any thermowell that can accept a 1/2" NPT thread. The FT2630 can be ordered with or without a thermowell and is available with the standard or NEMA 4X enclosure. The FT2630 will transmit the temperature wirelessly to the RM2432D receiver that converts the wireless signal to voltage input for use with a DDC controller or to a transceiver which will send the data to a BAS using BACnet, Modbus, or Lonworks protocol. Transmission distance in a typical building is 200-300 feet horizontal depending on the layout and construction of the building, and one oor above and one oor below the transceiver. Sensor distance and reliability can be increased with the addition of a RR2552B(s) repeater.Applications: Museums, Churches, Historical Buildings & New ConstructionThe FT2630 is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalog, as well as on ACI's website, www.workaci.com.StandardNEMA 4XFT2630AE-06: 2.83 lbs (1.28 kg)FT2630AE-02-SS: 3.11 lbs (1.41 kg)FT2630AE-04-SS: 3.17 lbs (1.44 kg)FT2630AE-06-SS: 3.23 lbs (1.47 kg)FT2630A-04-SS: 1.29 lbs (0.59 kg)FT2630A-06-SS: 1.30 lbs (0.59 kg)FT2630AE-02: 2.81 lbs (1.27 kg)FT2630AE-04: 2.82 lbs (1.28 kg)Automation Components, Inc.WIRELESS | FT2630WIRELESS | ## Call: 1-888-967-5224 | Web: www.workaci.com STANDARD ORDERINGModel #FT2630A-02FT2630AE-02-SSFT2630AE-04Item #131033142363134779DescriptionWireless Immersion Temperature Sensor (2.5”, No Well), Standard Enclosure Wireless Immersion Temperature Sensor (2.5”), NEMA 4X Enclosure (Machined Well)Wireless Immersion Temperature Sensor (4”, No Well), NEMA 4X Enclosure-OR-Model # Example:134779FT2630AE-041.88” (47.75mm)5.77” (146.56mm)3.19”(81.03mm)3.54”(89.92mm)2.16”(54.86mm)4.52”(114.81mm)DIMENSIONAL DRAWINGFront ViewRight ViewTop ViewStandardNEMA 4XProbe Available in 2.5”, 4” and 6” Lengths, With or Without a 304 SS ThermowellProbe Available in 2.5”, 4” and 6” Lengths, With or Without a 304 SS ThermowellA = Standard Enclosure (Default) | AE = NEMA 4X EnclosureFT263002 = 2.5” Probe | 04 = 4” Probe | 06 = 6” Probe---- = None (Default) | SS = Machined ThermowellCUSTOM ORDERINGA. Sensor Series No Selection RequiredB. Enclosure Select One (1)C. Probe Length Select One (1)D. Thermowell Select One (1)---- = Every 75 Seconds (Default) | 300 = Every 300 SecondsE. Transmission Time Select One (1)MODEL #FT2630Model # Example:FT2630A.AB.04C.SSD.300E.Next >