— 1SFC132057M0201 Softstarters Type PSE18...PSE370 Installation and commissioning manual2 Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201 This manual belongs to: __________________________________________Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M02013 Installation and Commissioning Manual ABB Softstarters PSE18...PSE370 1 General This is the Installation and Commissioning Manual for Softstarters Type PSE18…PSE370. Document number: 1SFC132057M0201 Revision: G Issue date: 2018-11-20 Data subject to change without notice. We reserve all rights to this document, even in the event that a patent is issued and a different commercial proprietary right is registered. Improper use, in particu- lar reproduction and dissemination to third parties, is not permitted. This document has been carefully checked. If the user nevertheless detects any errors, he is kindly asked to notify us as soon as possible. The data contained in this manual is intended solely for the product descrip- tion and is not to be deemed to be a statement of guaranteed properties. In the interests of our customers, we constantly seek to ensure that our products are developed to the latest technological standards. As a result, there may be some differences between the softstarter and the infor- mation in this manual. Author’s address: ABB AB Control Products SE-721 61 Västerås, Sweden Telephone: +46 (0) 21 32 07 00 www.new.abb.com/lowvoltage/products/softstarters www.abb.com/drives © Copyright 2018. All rights reserved. Specifi cation subject to changes without notice.4 Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201 2 Safety This chapter describes warning and information signs used in this manual, which the user should pay attention to. The softstarter shall be installed by authorized personnel only. This manual is a part of the PSE Softstarter and should always be accessible to personnel working with this product. The manual shall always be read through before performing any installation or commissioning tasks. 2.1 Use of signs warning and information Warning! Warning symbol indicates the presence of hazardous voltage which could result in personal injury. Warning! General warning symbol indicates the presence of a hazard which could result in personal injury and damage to equipment or property. Information Information sign alerts the reader to pertinent facts and conditions.Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M02015 Chapter 1 Introduction ............................................ 7 2 Quickstart ............................................... 11 3 Description ............................................. 15 4 Mounting ................................................ 27 5 Connection ............................................. 31 6 Human-Machine Interface (HMI) .............. 45 7 Functions and confi guration .................... 55 8 Fieldbus communication ......................... 79 9 Maintenance ........................................... 81 10 Troubleshooting ...................................... 83 11 Wiring diagrams ...................................... 95 12 Index ...................................................... 99 Customer feedback report ............................... 1026 Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201 NotesSoftstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M02017 Chapter 1 Chapter 1 Introduction Documentation for PSE18...PSE370 softstarter .......................................... 8 Installation and Commissioning Manual ...................................................... 8 Intended audience ................................................................................. 9 General ............................................................................................. 9 Requirements .................................................................................... 9 Revision notes and other documents ..................................................... 9 Acronyms and abbreviations .................................................................. 9 Explanation of concepts ......................................................................... 10 Cyber Security Legal Disclaimer .................................................................. 10Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M02018 Chapter 1 Chapter 1 Introduction 1.1 Documentation for PSE18...PSE370 softstarter For the Softstarter Type PSE18...PSE370, the following manuals are available: 1SFC132059M9901 (User manual short form, printed) 1SFC132057M0201 (English version, PDF-fi le) 1.2 Installation and Commissioning Manual This manual contains instructions on how to install, commission and maintain the softstarter. The manual covers procedures for mechanical and electrical installa- tion, and installation of communication devices. It also covers energizing, setting, and confi guration and verifying settings. For brief information see Softstarters Type PSE18...PSE370 User Manual short form, containing the same languages as the Installation and Commissioning Manual. Softstarters Type PSE18...PSE370 User Manual short form has docu- ment ID 1SFC132059M9901. For quickest possible start, read Chapter 2 Quickstart or go to the short form manual (1SFC132059M9901). A complete compilation of ABB’s softstarters can be found in Main catalogue Softstarters, document ID 1SFC132012C0201.Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M02019 Chapter 1 1.2.1 Intended audience 1.2.1.1 General The installation and commissioning manual is intended for the installation, com- missioning, and maintenance personnel responsible for getting the softstarter into normal service and out of service. 1.2.1.2 Requirements The installation personnel must have a basic knowledge in handling electric equip- ment. The commissioning and maintenance personnel must be well experienced in using this kind of equipment. 1.2.2 Revision notes and other documents For latest information on revisions and other documents related to the PSE Softs- tarters, please check www.new.abb.com/low-voltage/products/softstarters www.abb.com/drives 1.2.3 Acronyms and abbreviations The acronyms and abbreviations described in table 1.1 are used in this manual. Table 1.1 Acronym/ abbre- viation Description BP By-pass DOLDirect-on-line EOLElectronic overload protection for the Motor FB Fieldbus FBP FieldBusPlug HMI Human-Machine Interface I e Rated operational current ITInformation Technology LCDLiquid Crystal Display LEDLight Emitting Diode PCBPrinted Circuit Board PLCProgrammable Logic Controller PTCPositive Temperature Coeffi cient RTURemote Terminal Unit SCShort Circuit SCRSilicon Controlled Rectifi er ( thyristor) TORTop of Ramp ( full voltage/ Full-On) U c Rated control circuit voltage * U e Rated operational voltage * U s Rated control supply voltage * *) For defi nition see IEC 60947-1 edition 5.0Next >