You in ControlANDAIR PRODUCTSCONTROLSCSFM LISTEDMEA ACCEPTED10A @ 115VAC7A @ 28VDC10A @ 115VAC7A @ 28VDC24VDC @ 18mA 24VAC @ 39mA 115VAC @ 26mAPRODUCT DESCRIPTIONThe RIC-1 and RIC-2 Series Relays are multi-voltage devices providing form “C“ contacts rated for up to 10 amps. The relays may be energized by one of three input voltages: 24VDC, 24VAC, or 115VAC. Each relay contains a red LED which indicates when the relay coil is energized. To mount the RIC-1 and RIC-2 place the spud through a 1/2 in. (12.7mm) knockout on a junction box. The relays are also packaged with wire-nuts to aid installation.The RIC-1 and RIC-2 Relays are ideal for applications where remote relays are required for control or status feedback. They are suitable for use with HVAC, Temperature Control, Fire Alarm, Security, Energy Management and Lighting Control Systems.WIRING RIC SERIES MULTI-VOLTAGE RELAY MODULESRIC-1RIC-2Distributed By:24VDC @ 18mA 24VAC @ 39mA 115VAC @ 26mAAir Products and Controls isa Brand of Apollo America25 Corporate DriveAuburn Hills, MI 48326(248) 332-3900 Phone(888) 332-2241 Toll free(248) 332-8807 Faxwww.ap-c.comPRODUCT SPECIFICATIONSMODEL NUMBER: RIC-1 RIC-2 POWER REQUIREMENTS: 24VAC/24VDC/115VAC 24VAC/24VDC/115VAC POLARIZED: No NoENERGIZED LED INDICATOR: Yes YesCOIL REQUIREMENTS: @24VDC 18mA 18mA @24VAC 39mA 39mA @115VAC 26mA 26mACONTACT CONFIGURATION: (1) SPDT dry form “C” (1) DPDT dry form “C”CONTACT RATINGS: @28VDC 7A resistive 7A resistive @115VAC 10A resistive / 0.35PF inductive 10A resistive / 0.35PF inductiveWIRE LEADS: 6 “flying” leads 9 “flying” leads 12” / 18 AWG 12” / 18 AWG Wire-nuts provided Wire-nuts provided AMBIENT TEMPERATURE: 32°F to 120°F 32°F to 120°F @ 85% RH, NON-condensing (0°C to 49°C) (0°C to 49°C)MOUNTING: Spud mounting through 1/2” conduit knockout DIMENSIONS: H 2.50” (63mm) 2.50” (63mm) W 1.75” (44mm) 1.75” (44mm) D 1.30” (33mm) 1.30” (33mm) LISTINGS AND APPROVALS: UL* UOXX/7.S3403 UOXX/7.S3403 MEA 73-92-E Vol. 23 73-92-E Vol. 23 CSFM 7300-1004:101 7300-1004:101*UOXX=Control Unit Accessories, System; /7=also Certified for CanadaDS-RL-8 C050110© Air Products and Controls Inc. 2010NOTICE: The information contained in this document is intended only as a summary and is subject to change without notice. The products described have specific instructional/installation documentation, which covers various technical, approval, code, limitation and liability information. Copies of this documentation along with any gen-eral product warning and limitation documents, which also contain important information, are provided with the product and are also available from Air Products and Controls Inc. The information contained in all of these documents should be considered before specifying or using the products. Any example applications shown are subject to the most current enforced local/national codes, standards, approvals, certifications, and/or the authority having jurisdiction. All of these resources, as well as the specific manufacturer of any shown or mentioned related equipment, should be consulted prior to any implementation. For further information or assistance concerning the products, contact Air Products and Controls Inc. Air Products and Controls Inc. reserves the right to change any and all documentation without notice.Next >